Re: [PATCH 3/3] Documentation: mfd: s2mps11: Document support for S2MPS14

[Sachin Kamat]

Hi Krzysztof,

On 5 March 2014 14:52, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
> Add bindings documentation for S2MPS14 device to the s2mps11 driver.

nit: s/s2mps11/S2MPS11

>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> Cc: Mark Brown <broonie@xxxxxxxxxx>
> Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>
> Cc: Tomasz Figa <t.figa@xxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> Acked-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mfd/s2mps11.txt |   12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index 15ee89c3cc7b..f69bec294f02 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -1,5 +1,5 @@
>
> -* Samsung S2MPS11 Voltage and Current Regulator
> +* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
>
>  The Samsung S2MPS11 is a multi-function device which includes voltage and
>  current regulators, RTC, charger controller and other sub-blocks. It is
> @@ -7,7 +7,7 @@ interfaced to the host controller using an I2C interface. Each sub-block is
>  addressed by the host system using different I2C slave addresses.
>
>  Required properties:
> -- compatible: Should be "samsung,s2mps11-pmic".
> +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
>  - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
>
>  Optional properties:
> @@ -59,10 +59,14 @@ supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
>  as per the datasheet of s2mps11.
>
>         - LDOn
> -                 - valid values for n are 1 to 38
> +                 - valid values for n are:
> +                       - S2MPS11: 1 to 38
> +                       - S2MPS14: 1 to 25
>                   - Example: LDO1, LD02, LDO28
>         - BUCKn
> -                 - valid values for n are 1 to 10.
> +                 - valid values for n are:
> +                       - S2MPS11: 1 to 10
> +                       - S2MPS14: 1 to 5
>                   - Example: BUCK1, BUCK2, BUCK9
>
>  Example:
> --
> 1.7.9.5
>
Looks good.
Acked-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>


-- 
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/