Re: [RFC PATCH] edac: zynq: Added EDAC support for zynq ddr ecc controller

From: Mark Rutland
Date: Mon Mar 10 2014 - 06:57:23 EST


On Sun, Mar 09, 2014 at 02:57:16AM +0000, Punnaiah Choudary Kalluri wrote:
> Added EDAC support for reporting the ecc errors of zynq ddr controller.
> The ddr ecc controller corrects single bit errors and detects double bit
> errors
>
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
> ---
> .../devicetree/bindings/edac/zynq_edac.txt | 18 +
> drivers/edac/Kconfig | 7 +
> drivers/edac/Makefile | 1 +
> drivers/edac/zynq_edac.c | 613 ++++++++++++++++++++
> 4 files changed, 639 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/edac/zynq_edac.txt
> create mode 100644 drivers/edac/zynq_edac.c
>
> diff --git a/Documentation/devicetree/bindings/edac/zynq_edac.txt b/Documentation/devicetree/bindings/edac/zynq_edac.txt
> new file mode 100644
> index 0000000..c21ff83
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/edac/zynq_edac.txt
> @@ -0,0 +1,18 @@
> +Zynq EDAC driver, it does reports the DDR ECC single bit errors that are
> +corrected and double bit ecc errors that are detected by the DDR ECC controller.
> +ECC support for DDR is available in half-bus width(16 bit) configuration only.
> +
> +Required properties:
> +- compatible: Should be "xlnx,ps7-ddrc" or "xlnx,ps7-ddrc-1.00.a"

Is this an or or a xor?

For the former case, which is the most general, which can be used as a
fallback?

How about something like:

- compatible: should contain:
* "xlnx,ps7-ddrc-1.00.a" for <DESCRIPTION HERE>
* "xlnx,ps7-ddrc" for any compatible variant

Is there any need at all for the "xlnx,ps7-ddrc" string? The driver
doesn't care about it.

Cheers,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/