Re: [PATCH 1/3] mfd: max8997: use regmap to access registers
From: Krzysztof Kozlowski
Date: Tue Mar 11 2014 - 10:32:30 EST
On Tue, 2014-03-11 at 14:58 +0100, Robert Baldyga wrote:
> This patch modifies max8997 driver and each associated function driver,
> to use regmap instead of operating directly on i2c bus. It will allow to
> simplify IRQ handling using regmap-irq.
>
> Signed-off-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
> ---
> drivers/extcon/extcon-max8997.c | 31 ++++----
> drivers/input/misc/max8997_haptic.c | 34 +++++----
> drivers/leds/leds-max8997.c | 13 ++--
> drivers/mfd/max8997-irq.c | 64 ++++++----------
> drivers/mfd/max8997.c | 143 ++++++++++++++++-------------------
> drivers/power/max8997_charger.c | 33 ++++----
> drivers/regulator/max8997.c | 87 ++++++++++-----------
> drivers/rtc/rtc-max8997.c | 56 ++++++++------
> include/linux/mfd/max8997-private.h | 17 ++---
> 9 files changed, 229 insertions(+), 249 deletions(-)
I think you should also add "select REGMAP_I2C" to the main driver
config secion (drivers/mfd/Kconfig).
(...)
> diff --git a/drivers/mfd/max8997-irq.c b/drivers/mfd/max8997-irq.c
> index 43fa614..656d03b 100644
> --- a/drivers/mfd/max8997-irq.c
> +++ b/drivers/mfd/max8997-irq.c
> @@ -26,6 +26,7 @@
> #include <linux/interrupt.h>
> #include <linux/mfd/max8997.h>
> #include <linux/mfd/max8997-private.h>
> +#include <linux/regmap.h>
>
> static const u8 max8997_mask_reg[] = {
> [PMIC_INT1] = MAX8997_REG_INT1MSK,
> @@ -41,25 +42,6 @@ static const u8 max8997_mask_reg[] = {
> [FLASH_STATUS] = MAX8997_REG_INVALID,
> };
>
> -static struct i2c_client *get_i2c(struct max8997_dev *max8997,
> - enum max8997_irq_source src)
> -{
> - switch (src) {
> - case PMIC_INT1 ... PMIC_INT4:
> - return max8997->i2c;
> - case FUEL_GAUGE:
> - return NULL;
> - case MUIC_INT1 ... MUIC_INT3:
> - return max8997->muic;
> - case GPIO_LOW ... GPIO_HI:
> - return max8997->i2c;
> - case FLASH_STATUS:
> - return max8997->i2c;
> - default:
> - return ERR_PTR(-EINVAL);
> - }
> -}
> -
> struct max8997_irq_data {
> int mask;
> enum max8997_irq_source group;
> @@ -124,15 +106,20 @@ static void max8997_irq_sync_unlock(struct irq_data *data)
> int i;
>
> for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
> + struct regmap *map;
> u8 mask_reg = max8997_mask_reg[i];
> - struct i2c_client *i2c = get_i2c(max8997, i);
> +
> + if (i >= MUIC_INT1 && i <= MUIC_INT3)
> + map = max8997->regmap_muic;
> + else
> + map = max8997->regmap;
>
> if (mask_reg == MAX8997_REG_INVALID ||
> - IS_ERR_OR_NULL(i2c))
> + IS_ERR_OR_NULL(map))
> continue;
> max8997->irq_masks_cache[i] = max8997->irq_masks_cur[i];
>
> - max8997_write_reg(i2c, max8997_mask_reg[i],
> + regmap_write(map, max8997_mask_reg[i],
> max8997->irq_masks_cur[i]);
> }
>
> @@ -180,12 +167,12 @@ static struct irq_chip max8997_irq_chip = {
> static irqreturn_t max8997_irq_thread(int irq, void *data)
> {
> struct max8997_dev *max8997 = data;
> - u8 irq_reg[MAX8997_IRQ_GROUP_NR] = {};
> - u8 irq_src;
> + unsigned int irq_reg[MAX8997_IRQ_GROUP_NR] = {};
> + unsigned int irq_src;
> int ret;
> int i, cur_irq;
>
> - ret = max8997_read_reg(max8997->i2c, MAX8997_REG_INTSRC, &irq_src);
> + ret = regmap_read(max8997->regmap, MAX8997_REG_INTSRC, &irq_src);
> if (ret < 0) {
> dev_err(max8997->dev, "Failed to read interrupt source: %d\n",
> ret);
> @@ -194,8 +181,9 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
>
> if (irq_src & MAX8997_IRQSRC_PMIC) {
> /* PMIC INT1 ~ INT4 */
> - max8997_bulk_read(max8997->i2c, MAX8997_REG_INT1, 4,
> - &irq_reg[PMIC_INT1]);
> + for (i = 0; i < 4; ++i)
> + regmap_read(max8997->regmap,
> + MAX8997_REG_INT1+i, &irq_reg[PMIC_INT1+i]);
Can't you use here one bulk read instead of 4xregmap_read()?
> }
> if (irq_src & MAX8997_IRQSRC_FUELGAUGE) {
> /*
> @@ -215,8 +203,9 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
> }
> if (irq_src & MAX8997_IRQSRC_MUIC) {
> /* MUIC INT1 ~ INT3 */
> - max8997_bulk_read(max8997->muic, MAX8997_MUIC_REG_INT1, 3,
> - &irq_reg[MUIC_INT1]);
> + for (i = 0; i < 3; ++i)
> + regmap_read(max8997->regmap_muic,
> + MAX8997_MUIC_REG_INT1+i, &irq_reg[MUIC_INT1+i]);
Same as above - bulk.
> }
> if (irq_src & MAX8997_IRQSRC_GPIO) {
> /* GPIO Interrupt */
> @@ -225,8 +214,8 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
> irq_reg[GPIO_LOW] = 0;
> irq_reg[GPIO_HI] = 0;
>
> - max8997_bulk_read(max8997->i2c, MAX8997_REG_GPIOCNTL1,
> - MAX8997_NUM_GPIO, gpio_info);
> + regmap_bulk_read(max8997->regmap, MAX8997_REG_GPIOCNTL1,
> + gpio_info, MAX8997_NUM_GPIO);
> for (i = 0; i < MAX8997_NUM_GPIO; i++) {
> bool interrupt = false;
>
> @@ -260,7 +249,7 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
> }
> if (irq_src & MAX8997_IRQSRC_FLASH) {
> /* Flash Status Interrupt */
> - ret = max8997_read_reg(max8997->i2c, MAX8997_REG_FLASHSTATUS,
> + ret = regmap_read(max8997->regmap, MAX8997_REG_FLASHSTATUS,
> &irq_reg[FLASH_STATUS]);
> }
>
> @@ -312,7 +301,7 @@ int max8997_irq_init(struct max8997_dev *max8997)
> struct irq_domain *domain;
> int i;
> int ret;
> - u8 val;
> + unsigned int val;
>
> if (!max8997->irq) {
> dev_warn(max8997->dev, "No interrupt specified.\n");
> @@ -323,22 +312,19 @@ int max8997_irq_init(struct max8997_dev *max8997)
>
> /* Mask individual interrupt sources */
> for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
> - struct i2c_client *i2c;
> -
> max8997->irq_masks_cur[i] = 0xff;
> max8997->irq_masks_cache[i] = 0xff;
> - i2c = get_i2c(max8997, i);
>
> - if (IS_ERR_OR_NULL(i2c))
> + if (IS_ERR_OR_NULL(max8997->regmap))
> continue;
> if (max8997_mask_reg[i] == MAX8997_REG_INVALID)
> continue;
>
> - max8997_write_reg(i2c, max8997_mask_reg[i], 0xff);
> + regmap_write(max8997->regmap, max8997_mask_reg[i], 0xff);
> }
>
> for (i = 0; i < MAX8997_NUM_GPIO; i++) {
> - max8997->gpio_status[i] = (max8997_read_reg(max8997->i2c,
> + max8997->gpio_status[i] = (regmap_read(max8997->regmap,
> MAX8997_REG_GPIOCNTL1 + i,
> &val)
> & MAX8997_GPIO_DATA_MASK) ?
> diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
> index 5adede0..ca6f310 100644
> --- a/drivers/mfd/max8997.c
> +++ b/drivers/mfd/max8997.c
> @@ -33,6 +33,7 @@
> #include <linux/mfd/core.h>
> #include <linux/mfd/max8997.h>
> #include <linux/mfd/max8997-private.h>
> +#include <linux/regmap.h>
>
> #define I2C_ADDR_PMIC (0xCC >> 1)
> #define I2C_ADDR_MUIC (0x4A >> 1)
> @@ -57,81 +58,29 @@ static struct of_device_id max8997_pmic_dt_match[] = {
> };
> #endif
>
> -int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> -
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_byte_data(i2c, reg);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> -
> - ret &= 0xff;
> - *dest = ret;
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(max8997_read_reg);
> -
> -int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> -
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_i2c_block_data(i2c, reg, count, buf);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> -
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(max8997_bulk_read);
> -
> -int max8997_write_reg(struct i2c_client *i2c, u8 reg, u8 value)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> -
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_write_byte_data(i2c, reg, value);
> - mutex_unlock(&max8997->iolock);
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(max8997_write_reg);
> -
> -int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> +static const struct regmap_config max8997_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_REG_PMIC_END,
> +};
>
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_write_i2c_block_data(i2c, reg, count, buf);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> +static const struct regmap_config max8997_regmap_rtc_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_RTC_REG_END,
> +};
>
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(max8997_bulk_write);
> +static const struct regmap_config max8997_regmap_haptic_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_HAPTIC_REG_END,
> +};
>
> -int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> -
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_byte_data(i2c, reg);
> - if (ret >= 0) {
> - u8 old_val = ret & 0xff;
> - u8 new_val = (val & mask) | (old_val & (~mask));
> - ret = i2c_smbus_write_byte_data(i2c, reg, new_val);
> - }
> - mutex_unlock(&max8997->iolock);
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(max8997_update_reg);
> +static const struct regmap_config max8997_regmap_muic_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_MUIC_REG_END,
> +};
>
> /*
> * Only the common platform data elements for max8997 are parsed here from the
> @@ -209,11 +158,48 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
>
> max8997->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
> i2c_set_clientdata(max8997->rtc, max8997);
> +
> max8997->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
> i2c_set_clientdata(max8997->haptic, max8997);
> +
> max8997->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
> i2c_set_clientdata(max8997->muic, max8997);
>
> + max8997->regmap = devm_regmap_init_i2c(i2c, &max8997_regmap_config);
> + if (IS_ERR(max8997->regmap)) {
> + ret = PTR_ERR(max8997->regmap);
> + dev_err(max8997->dev,
> + "failed to allocate register map: %d\n", ret);
> + return ret;
> + }
> +
> + max8997->regmap_rtc = devm_regmap_init_i2c(max8997->rtc,
> + &max8997_regmap_rtc_config);
> + if (IS_ERR(max8997->regmap_rtc)) {
> + ret = PTR_ERR(max8997->regmap_rtc);
> + dev_err(max8997->dev,
> + "failed to allocate register map: %d\n", ret);
> + goto err_regmap;
> + }
> +
> + max8997->regmap_haptic = devm_regmap_init_i2c(max8997->haptic,
> + &max8997_regmap_haptic_config);
> + if (IS_ERR(max8997->regmap_haptic)) {
> + ret = PTR_ERR(max8997->regmap_haptic);
> + dev_err(max8997->dev,
> + "failed to allocate register map: %d\n", ret);
> + goto err_regmap;
> + }
> +
> + max8997->regmap_muic = devm_regmap_init_i2c(max8997->muic,
> + &max8997_regmap_muic_config);
> + if (IS_ERR(max8997->regmap_muic)) {
> + ret = PTR_ERR(max8997->regmap_muic);
> + dev_err(max8997->dev,
> + "failed to allocate register map: %d\n", ret);
> + goto err_regmap;
> + }
> +
> pm_runtime_set_active(max8997->dev);
>
> max8997_irq_init(max8997);
> @@ -238,6 +224,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
>
> err_mfd:
> mfd_remove_devices(max8997->dev);
> +err_regmap:
> i2c_unregister_device(max8997->muic);
> i2c_unregister_device(max8997->haptic);
> i2c_unregister_device(max8997->rtc);
> @@ -423,15 +410,15 @@ static int max8997_freeze(struct device *dev)
> int i;
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_pmic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_pmic[i],
> + regmap_read(max8997->regmap, max8997_dumpaddr_pmic[i],
> &max8997->reg_dump[i]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_muic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_muic[i],
> + regmap_read(max8997->regmap_muic, max8997_dumpaddr_muic[i],
> &max8997->reg_dump[i + MAX8997_REG_PMIC_END]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_haptic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_haptic[i],
> + regmap_read(max8997->regmap_haptic, max8997_dumpaddr_haptic[i],
> &max8997->reg_dump[i + MAX8997_REG_PMIC_END +
> MAX8997_MUIC_REG_END]);
Code looks good. Idea for another patch: could bulk read be used here?
At least some of registers have continuous addresses so maybe its worth
to read them at once?
>
> @@ -445,15 +432,15 @@ static int max8997_restore(struct device *dev)
> int i;
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_pmic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_pmic[i],
> + regmap_write(max8997->regmap, max8997_dumpaddr_pmic[i],
> max8997->reg_dump[i]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_muic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_muic[i],
> + regmap_write(max8997->regmap_muic, max8997_dumpaddr_muic[i],
> max8997->reg_dump[i + MAX8997_REG_PMIC_END]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_haptic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_haptic[i],
> + regmap_write(max8997->regmap_haptic, max8997_dumpaddr_haptic[i],
> max8997->reg_dump[i + MAX8997_REG_PMIC_END +
> MAX8997_MUIC_REG_END]);
As above - bulk write (if you still would like to improve things in this
driver)?
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/