Re: [PATCH v4 2/4] arm64: dts: APM X-Gene PCIe device tree nodes

[Jingoo Han]

On Thursday, March 06, 2014 3:06 PM, Tanmay Inamdar wrote:
> 
> This patch adds the device tree nodes for APM X-Gene PCIe controller and
> PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts
> nodes are added.
> 
> Signed-off-by: Tanmay Inamdar <tinamdar@xxxxxxx>
> ---
>  arch/arm64/boot/dts/apm-mustang.dts |    8 ++
>  arch/arm64/boot/dts/apm-storm.dtsi  |  155 +++++++++++++++++++++++++++++++++++
>  2 files changed, 163 insertions(+)

[.....]

> --- a/arch/arm64/boot/dts/apm-storm.dtsi
> +++ b/arch/arm64/boot/dts/apm-storm.dtsi

[.....]

> +
> +		pcie0: pcie@1f2b0000 {
> +			status = "disabled";
> +			device_type = "pci";
> +			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
> +			#interrupt-cells = <1>;
> +			#size-cells = <2>;
> +			#address-cells = <3>;
> +			reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
> +				0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */
> +			reg-names = "csr", "cfg";
> +			ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000   /* io */
> +				  0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */
                                                                          ^^^

I have a question about the fourth number '0xe0' of 'ranges' property.
Would you let me know what the '0xe0' means?

Best regards,
Jingoo Han

> +			dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
> +					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
> +					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
> +					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
> +			clocks = <&pcie0clk 0>;
> +		};

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/