On 12/03/2014 10:43, Alexandre Belloni :You can add my
This series adds DT support for the at91sam9rl SoC, then the at91sam9rl-ekThe series seems ready for inclusion. I stack the whole series on our
evaluation board.
While the at91sam9rl dtsi should be almost complete (still missing LCD and
touchscreen bits). The at91sam9rlek DT now support the following tested
features:
- MMC
- dbgu
- usart1
- watchdog
- nand
- leds
- buttons
- common clock framework
Next:
- spi
- dataflash
- i2c
- lcd
- touchscreen
- usb gadget
- audio
Changes since v4:
- correct a typo in the pwm clock name
- add an entry for the pwm clock in the board file lookup table
- reorder pinctrl nodes alphabetically
Changes since v3:
- reordered nand
- removed ADC and USB gadget definition as they were not working. They will
come with another set of patches adding proper support.
Alexandre Belloni (8):
ARM: at91: prepare at91sam9rl DT transition
ARM: at91: Add at91sam9rl DT SoC support
ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
ARM: at91: prepare common clk transition for sam9rl SoCs
ARM: at91/dt: define at91sam9rl clocks
ARM: at91/dt: define main clk frequency of at91sam9rlek
ARM: at91: switch sam9rl to common clock framework
Boris BREZILLON (1):
ARM: at91: prepare sam9 dt boards transition to common clk
at91-3.15-cleanup branch with my:
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Thanks a lot.
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/at91sam9rl.dtsi | 802 +++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9rlek.dts | 157 ++++++++
arch/arm/configs/at91_dt_defconfig | 1 +
arch/arm/mach-at91/Kconfig | 1 -
arch/arm/mach-at91/at91sam9rl.c | 23 +-
arch/arm/mach-at91/board-dt-sam9.c | 11 +-
7 files changed, 994 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9rl.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9rlek.dts