Re: [RFC PATCH] mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus

[Ulf Hansson]

On 12 March 2014 07:26, Aaron Lu <aaron.lu@xxxxxxxxx> wrote:
> On 03/12/2014 11:44 AM, Dong, Chuanxiao wrote:
>> Hi Aaron,
>>
>> This patch is tested on Intel platform, and SDIO function driver's suspend/resume callback will only be called once, which fixed this issue. Previously, they can be called twice.
>>
>> Here is the tested-by:
>>
>> Tested-by: xiaoming wang <xiaoming.wang@xxxxxxxxx>
>> Tested-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
>
> Thanks a lot for the test!
>
> -Aaron
>

Thanks for helping out testing!

Just out of curiosity, which sdio func driver did you use (or maybe it
hasn't been upstreamed yet)?

Anyway, I suppose it's ->suspend callback don't return -ENOSYS with
the expectation of the card to be removed?

So I assume you want this to go to stable as well, right?

Kind regards
Uffe

>>
>> Thanks
>> Chuanxiao
>>
>>> -----Original Message-----
>>> From: Lu, Aaron
>>> Sent: Wednesday, March 12, 2014 10:36 AM
>>> To: Ulf Hansson; linux-mmc@xxxxxxxxxxxxxxx; Chris Ball; Liu, Chuansheng; Dong,
>>> Chuanxiao
>>> Cc: linux-kernel@xxxxxxxxxxxxxxx; NeilBrown; Rafael J. Wysocki
>>> Subject: Re: [RFC PATCH] mmc: core: Invoke sdio func driver's PM callbacks from the
>>> sdio bus
>>>
>>> Hi Chuansheng & Chuanxiao,
>>>
>>> Can you please help us testing this patch on your platform and let us know the test
>>> result? Thanks.
>>>
>>> -Aaron
>>>
>>> On 02/28/2014 07:49 PM, Ulf Hansson wrote:
>>>> The sdio func device is added to the driver model after the card
>>>> device.
>>>>
>>>> This means the sdio func device will be suspend before the card device
>>>> and thus resumed after. The consequence are the mmc core don't
>>>> explicity need to protect itself from receiving sdio requests in
>>>> suspended state. Instead that can be handled from the sdio bus, which
>>>> is thus invokes the PM callbacks instead of old dummy function.
>>>>
>>>> In the case were the sdio func driver don't implement the PM callbacks
>>>> the mmc core will in the early phase of system suspend, remove the
>>>> card from the driver model and thus power off it.
>>>>
>>>> Cc: Aaron Lu <aaron.lu@xxxxxxxxx>
>>>> Cc: NeilBrown <neilb@xxxxxxx>
>>>> Cc: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx>
>>>> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
>>>> ---
>>>>
>>>> Note, this patch has only been compile tested. Would appreciate if
>>>> some with SDIO and a sdio func driver could help out to test this.
>>>> Especially the libertas driver would be nice.
>>>>
>>>> ---
>>>>  drivers/mmc/core/sdio.c     |   45 ++++---------------------------------------
>>>>  drivers/mmc/core/sdio_bus.c |   14 +-------------
>>>>  2 files changed, 5 insertions(+), 54 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index
>>>> 4d721c6..9933e42 100644
>>>> --- a/drivers/mmc/core/sdio.c
>>>> +++ b/drivers/mmc/core/sdio.c
>>>> @@ -943,40 +943,21 @@ static int mmc_sdio_pre_suspend(struct mmc_host
>>> *host)
>>>>   */
>>>>  static int mmc_sdio_suspend(struct mmc_host *host)  {
>>>> -   int i, err = 0;
>>>> -
>>>> -   for (i = 0; i < host->card->sdio_funcs; i++) {
>>>> -           struct sdio_func *func = host->card->sdio_func[i];
>>>> -           if (func && sdio_func_present(func) && func->dev.driver) {
>>>> -                   const struct dev_pm_ops *pmops = func->dev.driver->pm;
>>>> -                   err = pmops->suspend(&func->dev);
>>>> -                   if (err)
>>>> -                           break;
>>>> -           }
>>>> -   }
>>>> -   while (err && --i >= 0) {
>>>> -           struct sdio_func *func = host->card->sdio_func[i];
>>>> -           if (func && sdio_func_present(func) && func->dev.driver) {
>>>> -                   const struct dev_pm_ops *pmops = func->dev.driver->pm;
>>>> -                   pmops->resume(&func->dev);
>>>> -           }
>>>> -   }
>>>> -
>>>> -   if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
>>> {
>>>> +   if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
>>>>             mmc_claim_host(host);
>>>>             sdio_disable_wide(host->card);
>>>>             mmc_release_host(host);
>>>>     }
>>>>
>>>> -   if (!err && !mmc_card_keep_power(host))
>>>> +   if (!mmc_card_keep_power(host))
>>>>             mmc_power_off(host);
>>>>
>>>> -   return err;
>>>> +   return 0;
>>>>  }
>>>>
>>>>  static int mmc_sdio_resume(struct mmc_host *host)  {
>>>> -   int i, err = 0;
>>>> +   int err = 0;
>>>>
>>>>     BUG_ON(!host);
>>>>     BUG_ON(!host->card);
>>>> @@ -1019,24 +1000,6 @@ static int mmc_sdio_resume(struct mmc_host *host)
>>>>             wake_up_process(host->sdio_irq_thread);
>>>>     mmc_release_host(host);
>>>>
>>>> -   /*
>>>> -    * If the card looked to be the same as before suspending, then
>>>> -    * we proceed to resume all card functions.  If one of them returns
>>>> -    * an error then we simply return that error to the core and the
>>>> -    * card will be redetected as new.  It is the responsibility of
>>>> -    * the function driver to perform further tests with the extra
>>>> -    * knowledge it has of the card to confirm the card is indeed the
>>>> -    * same as before suspending (same MAC address for network cards,
>>>> -    * etc.) and return an error otherwise.
>>>> -    */
>>>> -   for (i = 0; !err && i < host->card->sdio_funcs; i++) {
>>>> -           struct sdio_func *func = host->card->sdio_func[i];
>>>> -           if (func && sdio_func_present(func) && func->dev.driver) {
>>>> -                   const struct dev_pm_ops *pmops = func->dev.driver->pm;
>>>> -                   err = pmops->resume(&func->dev);
>>>> -           }
>>>> -   }
>>>> -
>>>>     host->pm_flags &= ~MMC_PM_KEEP_POWER;
>>>>     return err;
>>>>  }
>>>> diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
>>>> index 92d1ba8..4fa8fef9 100644
>>>> --- a/drivers/mmc/core/sdio_bus.c
>>>> +++ b/drivers/mmc/core/sdio_bus.c
>>>> @@ -197,20 +197,8 @@ static int sdio_bus_remove(struct device *dev)
>>>>
>>>>  #ifdef CONFIG_PM
>>>>
>>>> -#ifdef CONFIG_PM_SLEEP
>>>> -static int pm_no_operation(struct device *dev) -{
>>>> -   /*
>>>> -    * Prevent the PM core from calling SDIO device drivers' suspend
>>>> -    * callback routines, which it is not supposed to do, by using this
>>>> -    * empty function as the bus type suspend callaback for SDIO.
>>>> -    */
>>>> -   return 0;
>>>> -}
>>>> -#endif
>>>> -
>>>>  static const struct dev_pm_ops sdio_bus_pm_ops = {
>>>> -   SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
>>>> +   SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
>>>>     SET_RUNTIME_PM_OPS(
>>>>             pm_generic_runtime_suspend,
>>>>             pm_generic_runtime_resume,
>>>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/