[PATCH v5 0/5] BCM59056 PMU regulator support

[Matt Porter]

The BCM59056 is a multi-function power management unit used with the
BCM281xx family of SoCs. This series adds an MFD and voltage regulator
driver to support the BCM59056. The bcm28155-ap DT support is updated
to enable use of regulators on the otg and sdhci peripherals.

Changes since v4:
	- clarify binding wording: regulators is a child node rather than
	  a property and the list of ldos/dcdcs are node names
	- remove unused #address-cells and #size-cells properties from
	  the binding and dtsi

Changes since v3:
	- remove needless init of local ret variable in mfd driver probe

Changes since v2:
	- Move to mfd_add_devices() approach, eliminating representation
	  of the regulator block as a hardware subdevice. Regulators are
	  listed in the PMU binding and referenced via the parent device
	  of_node by the regulator driver.
	- Allow mfd driver to build as module
	- Remove regulator constraints from the .dtsi include only the
	  board-specific constraints in the board .dts.

Changes since v1:
        - renamed to bcm590xx to accomodate future family parts
        - remove use of subsys_initcall
        - fix BCM590XX_MAX_REGISTER value
        - remove unused chip id in mfd of/i2c matching
        - switch to of_platform_populate() in mfd
        - update binding to single document with regulators as optional
          properties in the regulator subdevice IP description
        - remove unused regulator get/set mode ops
        - remove unneeded regulator NULL constraint check
        - regulators property is optional, allow the driver to probe
          when it is missing
        - move of_node presence check into bcm590xx_parse_dt_reg_data()


Matt Porter (5):
  mfd: add bcm590xx pmu DT binding
  mfd: add bcm590xx pmu driver
  regulator: add bcm590xx regulator driver
  ARM: configs: bcm_defconfig: enable bcm590xx regulator support
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap

 Documentation/devicetree/bindings/mfd/bcm590xx.txt |  37 ++
 arch/arm/boot/dts/bcm28155-ap.dts                  |  47 ++-
 arch/arm/boot/dts/bcm59056.dtsi                    |  74 ++++
 arch/arm/configs/bcm_defconfig                     |   7 +
 drivers/mfd/Kconfig                                |   8 +
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/bcm590xx.c                             |  93 +++++
 drivers/regulator/Kconfig                          |   8 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/bcm590xx-regulator.c             | 413 +++++++++++++++++++++
 include/linux/mfd/bcm590xx.h                       |  31 ++
 11 files changed, 719 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/bcm590xx.txt
 create mode 100644 arch/arm/boot/dts/bcm59056.dtsi
 create mode 100644 drivers/mfd/bcm590xx.c
 create mode 100644 drivers/regulator/bcm590xx-regulator.c
 create mode 100644 include/linux/mfd/bcm590xx.h

-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/