Re: [PATCH 2/5] ARM: lager: add vin1 node
From: Simon Horman
Date: Wed Mar 12 2014 - 21:55:33 EST
On Fri, Mar 07, 2014 at 01:01:36PM +0000, Ben Dooks wrote:
> Add device-tree for vin1 (composite video in) on the
> lager board.
Please update the prefix of the subject of this patch to:
ARM: shmobile: lager:
>
> Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/r8a7790-lager.dts | 38 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
> index a087421..7528cfc 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -158,6 +158,11 @@
> renesas,groups = "i2c2";
> renesas,function = "i2c2";
> };
> +
> + vin1_pins: vin {
> + renesas,groups = "vin1_data8", "vin1_clk";
> + renesas,function = "vin1";
> + };
> };
>
> &mmcif1 {
> @@ -239,8 +244,41 @@
> status = "ok";
> pinctrl-0 = <&i2c2_pins>;
> pinctrl-names = "default";
> +
> + adv7180: adv7180@0x20 {
> + compatible = "adi,adv7180";
> + reg = <0x20>;
> + remote = <&vin1>;
> +
> + port {
> + adv7180_1: endpoint {
> + bus-width = <8>;
> + remote-endpoint = <&vin1ep0>;
> + };
> + };
> + };
> +
> };
>
> &i2c3 {
> status = "ok";
> };
> +
> +/* composite video input */
> +&vin1 {
> + pinctrl-0 = <&vin1_pins>;
> + pinctrl-names = "default";
> +
> + status = "ok";
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vin1ep0: endpoint {
> + remote-endpoint = <&adv7180_1>;
> + bus-width = <8>;
> + };
> + };
> +};
> +
> --
> 1.9.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/