[PATCH 13/22] Input: atmel_mxt_ts - add additional bootloader addresses

[Nick Dyer]

Move bootloaders reads/writes into separate functions. Instead of switching
client->addr, define new field bootloader_addr in mxt_data. Implement
lookup calculation for bootloader addresses.

Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
Acked-by: Benson Leung <bleung@xxxxxxxxxxxx>
Acked-by: Yufeng Shen <miletus@xxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 138 +++++++++++++++++++++----------
 1 file changed, 93 insertions(+), 45 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e3bf5b4..09f8b18 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -29,12 +29,6 @@
 #define MXT_VER_21		21
 #define MXT_VER_22		22
 
-/* Slave addresses */
-#define MXT_APP_LOW		0x4a
-#define MXT_APP_HIGH		0x4b
-#define MXT_BOOT_LOW		0x24
-#define MXT_BOOT_HIGH		0x25
-
 /* Firmware files */
 #define MXT_FW_NAME		"maxtouch.fw"
 #define MXT_CFG_NAME		"maxtouch.cfg"
@@ -267,6 +261,7 @@ struct mxt_data {
 	u16 mem_size;
 	u32 config_crc;
 	u32 info_crc;
+	u8 bootloader_addr;
 
 	/* Cached parameters from object table */
 	u8 T6_reportid;
@@ -354,9 +349,82 @@ static int mxt_wait_for_completion(struct mxt_data *data,
 	return 0;
 }
 
+static int mxt_bootloader_read(struct mxt_data *data,
+			       u8 *val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.flags |= I2C_M_RD;
+	msg.len = count;
+	msg.buf = val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_bootloader_write(struct mxt_data *data,
+				const u8 * const val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.len = count;
+	msg.buf = (u8 *)val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_lookup_bootloader_address(struct mxt_data *data)
+{
+	u8 appmode = data->client->addr;
+	u8 bootloader;
+
+	switch (appmode) {
+	case 0x4a:
+	case 0x4b:
+	case 0x4c:
+	case 0x4d:
+	case 0x5a:
+	case 0x5b:
+		bootloader = appmode - 0x26;
+		break;
+	default:
+		dev_err(&data->client->dev,
+			"Appmode i2c address 0x%02x not found\n",
+			appmode);
+		return -EINVAL;
+	}
+
+	data->bootloader_addr = bootloader;
+	return 0;
+}
+
 static int mxt_check_bootloader(struct mxt_data *data, unsigned int state)
 {
-	struct i2c_client *client = data->client;
+	struct device *dev = &data->client->dev;
 	u8 val;
 	int ret;
 
@@ -377,15 +445,14 @@ recheck:
 			 * by writing length 0x000 to device (iff we are in
 			 * WAITING_FRAME_DATA state).
 			 */
-			dev_err(&client->dev, "Update wait error %d\n", ret);
+			dev_err(dev, "Update wait error %d\n", ret);
 			return ret;
 		}
 	}
 
-	if (i2c_master_recv(client, &val, 1) != 1) {
-		dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
-		return -EIO;
-	}
+	ret = mxt_bootloader_read(data, &val, 1);
+	if (ret)
+		return ret;
 
 	switch (state) {
 	case MXT_WAITING_BOOTLOAD_CMD:
@@ -401,7 +468,7 @@ recheck:
 	}
 
 	if (val != state) {
-		dev_err(&client->dev, "Invalid bootloader state %02X != %02X\n",
+		dev_err(dev, "Invalid bootloader state %02X != %02X\n",
 			val, state);
 		return -EINVAL;
 	}
@@ -409,28 +476,17 @@ recheck:
 	return 0;
 }
 
-static int mxt_unlock_bootloader(struct i2c_client *client)
+static int mxt_unlock_bootloader(struct mxt_data *data)
 {
+	int ret;
 	u8 buf[2];
 
 	buf[0] = MXT_UNLOCK_CMD_LSB;
 	buf[1] = MXT_UNLOCK_CMD_MSB;
 
-	if (i2c_master_send(client, buf, 2) != 2) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int mxt_fw_write(struct i2c_client *client,
-			     const u8 *data, unsigned int frame_size)
-{
-	if (i2c_master_send(client, data, frame_size) != frame_size) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
+	ret = mxt_bootloader_write(data, buf, 2);
+	if (ret)
+		return ret;
 
 	return 0;
 }
@@ -1342,7 +1398,6 @@ done:
 static int mxt_load_fw(struct device *dev, const char *fn)
 {
 	struct mxt_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	const struct firmware *fw = NULL;
 	unsigned int frame_size;
 	unsigned int pos = 0;
@@ -1354,6 +1409,10 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		return ret;
 	}
 
+	ret = mxt_lookup_bootloader_address(data);
+	if (ret)
+		goto release_firmware;
+
 	/* Change to the bootloader mode */
 	data->in_bootloader = true;
 
@@ -1363,12 +1422,6 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 
 	msleep(MXT_RESET_TIME);
 
-	/* Change to slave address of bootloader */
-	if (client->addr == MXT_APP_LOW)
-		client->addr = MXT_BOOT_LOW;
-	else
-		client->addr = MXT_BOOT_HIGH;
-
 	reinit_completion(&data->bl_completion);
 
 	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD);
@@ -1376,7 +1429,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		goto disable_irq;
 
 	/* Unlock bootloader */
-	mxt_unlock_bootloader(client);
+	mxt_unlock_bootloader(data);
 
 	while (pos < fw->size) {
 		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA);
@@ -1391,7 +1444,9 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		frame_size += 2;
 
 		/* Write one frame to device */
-		mxt_fw_write(client, fw->data + pos, frame_size);
+		ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
+		if (ret)
+			goto disable_irq;
 
 		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS);
 		if (ret)
@@ -1421,13 +1476,6 @@ disable_irq:
 	disable_irq(data->irq);
 release_firmware:
 	release_firmware(fw);
-
-	/* Change to slave address of application */
-	if (client->addr == MXT_BOOT_LOW)
-		client->addr = MXT_APP_LOW;
-	else
-		client->addr = MXT_APP_HIGH;
-
 	return ret;
 }
 
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/