Re: [PATCH] leds: pwm: set polarity on non DT platforms

[Bryan Wu]

On Mon, Mar 17, 2014 at 11:38 AM, Alexandre Belloni
<alexandre.belloni@xxxxxxxxxxxxxxxxxx> wrote:
> Set inversed polarity when .active_low is set in the platform_data. With device
> tree, this is taken care of by of_pwm_xlate_with_flags(), called from
> of_pwm_get().
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> ---
>  drivers/leds/leds-pwm.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
> index 605047428b5a..09681556a6aa 100644
> --- a/drivers/leds/leds-pwm.c
> +++ b/drivers/leds/leds-pwm.c
> @@ -180,6 +180,11 @@ static int led_pwm_probe(struct platform_device *pdev)
>                         led_dat->cdev.max_brightness = cur_led->max_brightness;
>                         led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
>
> +                       if (led_dat->active_low)

Why .active_low needs to inverse PWM polarity? In
of_pwm_xlate_with_flags(), it checked with PWM_POLARITY_INVERSED in
args. Moreover in of_pwm_simple_xlate() and pxa_pwm_of_xlate(), we
didn't inverse PWM polarity at all.

Add Thierry to review this.

Thanks,
-Bryan

> +                               if (pwm_set_polarity(led_dat->pwm,
> +                                                PWM_POLARITY_INVERSED))
> +                                       dev_err(&pdev->dev, "impossible to change polarity");
> +
>                         led_dat->can_sleep = pwm_can_sleep(led_dat->pwm);
>                         if (led_dat->can_sleep)
>                                 INIT_WORK(&led_dat->work, led_pwm_work);
> --
> 1.8.3.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/