[PATCH v2 05/12] scsi/NCR5380: fix build failures when debugging is enabled
From: Finn Thain
Date: Wed Mar 19 2014 - 19:27:59 EST
The change from cmd->target to cmd->device->id was apparently the purpose of
commit a7f251228390e87d86c5e3846f99a455517fdd8e in
kernel/git/tglx/history.git but some instances have been missed.
Also fix the "NDEBUG_LAST_WRITE_SENT" and "NDEBUG_ALL" typo's.
Also fix some format strings (%ul becomes %lu) that caused compiler warnings.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
Changes since v1:
- Fixed a build failure in sun3_NCR5380.c with NDEBUG_LISTS.
---
drivers/scsi/NCR5380.c | 14 +++++++-------
drivers/scsi/sun3_NCR5380.c | 10 +++-------
2 files changed, 10 insertions(+), 14 deletions(-)
Index: linux-m68k/drivers/scsi/sun3_NCR5380.c
===================================================================
--- linux-m68k.orig/drivers/scsi/sun3_NCR5380.c 2014-03-19 23:23:02.000000000 +1100
+++ linux-m68k/drivers/scsi/sun3_NCR5380.c 2014-03-19 23:34:42.000000000 +1100
@@ -1012,12 +1012,8 @@ static void NCR5380_main (struct work_st
for (tmp = (struct scsi_cmnd *) hostdata->issue_queue,
prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp) ) {
-#if (NDEBUG & NDEBUG_LISTS)
if (prev != tmp)
- printk("MAIN tmp=%p target=%d busy=%d lun=%d\n",
- tmp, tmp->target, hostdata->busy[tmp->target],
- tmp->lun);
-#endif
+ dprintk(NDEBUG_LISTS, ("MAIN tmp=%p target=%d busy=%d lun=%d\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun));
/* When we find one, remove it from the issue queue. */
/* ++guenther: possible race with Falcon locking */
if (
@@ -1049,7 +1045,7 @@ static void NCR5380_main (struct work_st
*/
MAIN_PRINTK("scsi%d: main(): command for target %d "
"lun %d removed from issue_queue\n",
- HOSTNO, tmp->target, tmp->lun);
+ HOSTNO, tmp->device->id, tmp->device->lun);
/*
* REQUEST SENSE commands are issued without tagged
* queueing, even on SCSI-II devices because the
@@ -2587,7 +2583,7 @@ static void NCR5380_reselect (struct Scs
hostdata->connected = tmp;
RSL_PRINTK("scsi%d: nexus established, target = %d, lun = %d, tag = %d\n",
- HOSTNO, tmp->target, tmp->lun, tmp->tag);
+ HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
}
Index: linux-m68k/drivers/scsi/NCR5380.c
===================================================================
--- linux-m68k.orig/drivers/scsi/NCR5380.c 2014-03-19 23:34:41.000000000 +1100
+++ linux-m68k/drivers/scsi/NCR5380.c 2014-03-19 23:34:42.000000000 +1100
@@ -1046,7 +1046,7 @@ static void NCR5380_main(struct work_str
for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (Scsi_Cmnd *) tmp->host_scribble)
{
if (prev != tmp)
- dprintk(NDEBUG_LISTS, ("MAIN tmp=%p target=%d busy=%d lun=%d\n", tmp, tmp->target, hostdata->busy[tmp->target], tmp->lun));
+ dprintk(NDEBUG_LISTS, ("MAIN tmp=%p target=%d busy=%d lun=%d\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun));
/* When we find one, remove it from the issue queue. */
if (!(hostdata->busy[tmp->device->id] & (1 << tmp->device->lun))) {
if (prev) {
@@ -1064,7 +1064,7 @@ static void NCR5380_main(struct work_str
* On failure, we must add the command back to the
* issue queue so we can keep trying.
*/
- dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, ("scsi%d : main() : command for target %d lun %d removed from issue_queue\n", instance->host_no, tmp->target, tmp->lun));
+ dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, ("scsi%d : main() : command for target %d lun %d removed from issue_queue\n", instance->host_no, tmp->device->id, tmp->device->lun));
/*
* A successful selection is defined as one that
@@ -2028,7 +2028,7 @@ static int NCR5380_transfer_dma(struct S
hostdata->flags &= ~FLAG_CHECK_LAST_BYTE_SENT;
if (NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT) {
hostdata->flags |= FLAG_HAS_LAST_BYTE_SENT;
- dprintk(NDEBUG_LAST_WRITE_SENT, ("scsi%d : last bit sent works\n", instance->host_no));
+ dprintk(NDEBUG_LAST_BYTE_SENT, ("scsi%d : last byte sent works\n", instance->host_no));
}
}
} else {
@@ -2454,7 +2454,7 @@ static void NCR5380_information_transfer
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (!cmd->device->disconnect && should_disconnect(cmd->cmnd[0])) {
NCR5380_set_timer(hostdata, USLEEP_SLEEP);
- dprintk(NDEBUG_USLEEP, ("scsi%d : issued command, sleeping until %ul\n", instance->host_no, hostdata->time_expires));
+ dprintk(NDEBUG_USLEEP, ("scsi%d : issued command, sleeping until %lu\n", instance->host_no, hostdata->time_expires));
return;
}
break;
@@ -2466,7 +2466,7 @@ static void NCR5380_information_transfer
break;
default:
printk("scsi%d : unknown phase\n", instance->host_no);
- NCR5380_dprint(NDEBUG_ALL, instance);
+ NCR5380_dprint(NDEBUG_ANY, instance);
} /* switch(phase) */
} /* if (tmp * SR_REQ) */
else {
@@ -2474,7 +2474,7 @@ static void NCR5380_information_transfer
*/
if (!cmd->device->disconnect && time_after_eq(jiffies, poll_time)) {
NCR5380_set_timer(hostdata, USLEEP_SLEEP);
- dprintk(NDEBUG_USLEEP, ("scsi%d : poll timed out, sleeping until %ul\n", instance->host_no, hostdata->time_expires));
+ dprintk(NDEBUG_USLEEP, ("scsi%d : poll timed out, sleeping until %lu\n", instance->host_no, hostdata->time_expires));
return;
}
}
@@ -2595,7 +2595,7 @@ static void NCR5380_reselect(struct Scsi
do_abort(instance);
} else {
hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, ("scsi%d : nexus established, target = %d, lun = %d, tag = %d\n", instance->host_no, tmp->target, tmp->lun, tmp->tag));
+ dprintk(NDEBUG_RESELECTION, ("scsi%d : nexus established, target = %d, lun = %d, tag = %d\n", instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag));
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/