Re: [PATCH] ARM: at91: panic when the mck rate is zero

[Boris BREZILLON]

Le 20/03/2014 17:14, Alexandre Belloni a écrit :
> If the mck rate is zero, we'll hit the following warning:
>
> WARNING: CPU: 0 PID: 0 at arch/arm/mach-at91/at91sam926x_time.c:257 at91sam926x_pit_init+0x13c/0x260()
>
> But the kernel will continue to try booting and face a lot of divisions by zero
> when trying to handle the various clocks.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> ---
>   arch/arm/mach-at91/at91sam926x_time.c | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
> index 0f04ffe9c5a8..f060f6371392 100644
> --- a/arch/arm/mach-at91/at91sam926x_time.c
> +++ b/arch/arm/mach-at91/at91sam926x_time.c
> @@ -250,6 +250,8 @@ void __init at91sam926x_pit_init(void)
>   	if (IS_ERR(mck))
>   		panic("AT91: PIT: Unable to get mck clk\n");
>   	pit_rate = clk_get_rate(mck) / 16;
> +	if (pit_rate == 0)
> +		panic("AT91: PIT: can't continue, mck rate is zero\n");
You're testing pit_rate why not printing:

"AT91: PIT: can't continue, *pit* rate is zero\n"


Otherwise,

Acked-by: Boris BREZILLON <b.brezillon.dev@xxxxxxxxx>
>   	pit_cycle = (pit_rate + HZ/2) / HZ;
>   	WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
>   

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/