[PATCH v2] staging: comedi: s626: use comedi_timeout() on remaining loops

[Chase Southwood]

There were just a handful of more while loops in this file that needed
timeouts, and this patch takes care of them.  One new callback is
introduced, and all of the proper comedi_timeout() calls are then used.

Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
---
2: s626_i2c_handshake_eoc() can be used in s626_initialize() as noted by
Ian.  So, s626_initialize_eoc() has been removed, and its uses swapped
for s626_i2c_handshake_eoc().

 drivers/staging/comedi/drivers/s626.c | 34 ++++++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 95fadf3..865cf93 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -295,10 +295,24 @@ static void s626_debi_replace(struct comedi_device *dev, unsigned int addr,
 
 /* **************  EEPROM ACCESS FUNCTIONS  ************** */
 
+static int s626_i2c_handshake_eoc(struct comedi_device *dev,
+				 struct comedi_subdevice *s,
+				 struct comedi_insn *insn,
+				 unsigned long context)
+{
+	unsigned int status;
+
+	status = s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
+	if (status)
+		return 0;
+	return -EBUSY;
+}
+
 static uint32_t s626_i2c_handshake(struct comedi_device *dev, uint32_t val)
 {
 	struct s626_private *devpriv = dev->private;
 	unsigned int ctrl;
+	uint32_t ret;
 
 	/* Write I2C command to I2C Transfer Control shadow register */
 	writel(val, devpriv->mmio + S626_P_I2CCTRL);
@@ -308,8 +322,9 @@ static uint32_t s626_i2c_handshake(struct comedi_device *dev, uint32_t val)
 	 * wait for upload confirmation.
 	 */
 	s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
-	while (!s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2))
-		;
+	ret = comedi_timeout(dev, NULL, NULL, s626_i2c_handshake_eoc, 0);
+	if (ret)
+		return ret;
 
 	/* Wait until I2C bus transfer is finished or an error occurs */
 	do {
@@ -2029,8 +2044,9 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 	/* Wait for the data to arrive in FB BUFFER 1 register. */
 
 	/* Wait for ADC done */
-	while (!(readl(devpriv->mmio + S626_P_PSR) & S626_PSR_GPIO2))
-		;
+	ret = comedi_timeout(dev, s, insn, s626_ai_eoc, 0);
+	if (ret)
+		return ret;
 
 	/* Fetch ADC data from audio interface's input shift register. */
 
@@ -2681,8 +2697,9 @@ static int s626_initialize(struct comedi_device *dev)
 	writel(S626_I2C_CLKSEL | S626_I2C_ABORT,
 	       devpriv->mmio + S626_P_I2CSTAT);
 	s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
-	while (!(readl(devpriv->mmio + S626_P_MC2) & S626_MC2_UPLD_IIC))
-		;
+	ret = comedi_timeout(dev, NULL, NULL, s626_i2c_handshake_eoc, 0);
+	if (ret)
+		return ret;
 
 	/*
 	 * Per SAA7146 data sheet, write to STATUS
@@ -2691,8 +2708,9 @@ static int s626_initialize(struct comedi_device *dev)
 	for (i = 0; i < 2; i++) {
 		writel(S626_I2C_CLKSEL, devpriv->mmio + S626_P_I2CSTAT);
 		s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
-		while (!s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2))
-			;
+		ret = comedi_timeout(dev, NULL, NULL, s626_i2c_handshake_eoc, 0);
+		if (ret)
+			return ret;
 	}
 
 	/*
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/