Re: [PATCH] phy/at8031: enable at8031 to work on interrupt mode

[Sergei Shtylyov]

Hello.

On 27-03-2014 10:18, Zhao Qiang wrote:

> The at8031 can work on polling mode and interrupt mode.
> Add ack_interrupt and config intr funcs to enable
> interrupt mode for it.

> Signed-off-by: Zhao Qiang <B45475@xxxxxxxxxxxxx>
> ---
>   drivers/net/phy/at803x.c | 30 ++++++++++++++++++++++++++++++
>   1 file changed, 30 insertions(+)

> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index bc71947..d034ef5 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
[...]
> @@ -191,6 +194,31 @@ static int at803x_config_init(struct phy_device *phydev)
>   	return 0;
>   }
>
> +static int at803x_ack_interrupt(struct phy_device *phydev)
> +{
> +	int err;
> +
> +	err = phy_read(phydev, AT803X_INSR);

   Could make this an initializer...

> +
> +	return (err < 0) ? err : 0;
> +}
> +
> +static int at803x_config_intr(struct phy_device *phydev)
> +{
> +	int err;
> +	int value;
> +
> +	value = phy_read(phydev, AT803X_INER);
> +
> +	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> +		err = phy_write(phydev, AT803X_INER,
> +				(value | AT803X_INER_INIT));

   Inner parens not needed.

> +	else
> +		err = phy_write(phydev, AT803X_INER, value);

   Why are you not clearing the bits here? Why write back what has been read 
at all?

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/