Re: [mtd/sbc_gxx] kernel BUG at include/linux/mtd/map.h:148!
From: Jet Chen
Date: Thu Apr 03 2014 - 05:14:21 EST
Hi Michal,
Your patch fixes the problem.
Tested-by: Jet Chen <jet.chen@xxxxxxxxx>
Thanks,
-Jet
On 03/31/2014 10:35 PM, Michal Marek wrote:
On Mon, Mar 31, 2014 at 07:34:12PM +0800, Fengguang Wu wrote:
CC Michal and kbuild list.
On Thu, Mar 27, 2014 at 04:51:53PM -0600, Bjorn Helgaas wrote:
[+cc David, Brian]
On Thu, Mar 27, 2014 at 8:01 AM, Fengguang Wu <fengguang.wu@xxxxxxxxx> wrote:
FYI, here is a very old warning, too old to be bisected.
[ 5.282127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 5.286079] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
[ 5.288723] ------------[ cut here ]------------
[ 5.289649] kernel BUG at include/linux/mtd/map.h:148!
I think the problem is that your randconfig happens to have none of
CONFIG_MTD_MAP_BANK_WIDTH_* set (you should have played the lottery
today!), and the default implementation of map_bankwidth() in that
case is just "BUG()":
$ grep MTD_MAP config-3.14.0-rc8-wl-03045-gdf16ea4
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
I don't know enough Kconfig or MTD to fix this.
Michal, the problem we run into is, how to select one of the above
CONFIG_MTD_MAP_BANK_WIDTH_xx in "make randconfig".
You can't enforce this in Kconfig. What you can do is to make the logic
more fool-proof and fall back to some sensible default if none of the
CONFIG_MTD_MAP_BANK_WIDTH_* options is enabled. Like this
From 76e66ceea7e2ffbb1d39c01af2eaf6f2b66c2be3 Mon Sep 17 00:00:00 2001
From: Michal Marek <mmarek@xxxxxxx>
Date: Mon, 31 Mar 2014 16:25:32 +0200
Subject: [PATCH] mtd: Fall back to MTD_MAP_BANK_WIDTH_1 if none is specified
This is mainly to fix make randconfig errors.
Signed-off-by: Michal Marek <mmarek@xxxxxxx>
---
drivers/mtd/chips/Kconfig | 8 ++++++++
include/linux/mtd/map.h | 4 ++--
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index e4696b3..219de49 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -115,6 +115,14 @@ config MTD_MAP_BANK_WIDTH_32
If you wish to support CFI devices on a physical bus which is
256 bits wide, say 'Y'.
+config HAVE_MTD_MAP_BANK_WIDTH_1
+ bool
+ default MTD_MAP_BANK_WIDTH_1 || (!MTD_MAP_BANK_WIDTH_2 && !MTD_MAP_BANK_WIDTH_4 && !MTD_MAP_BANK_WIDTH_8 && !MTD_MAP_BANK_WIDTH_16 && !MTD_MAP_BANK_WIDTH_32)
+
+if HAVE_MTD_MAP_BANK_WIDTH_1 && !MTD_MAP_BANK_WIDTH_1
+comment "no buswidth selected, using 8-bit as a fallback "
+endif
+
config MTD_CFI_I1
bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY
default y
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 5f487d7..d4f4f49 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -32,7 +32,7 @@
#include <asm/io.h>
#include <asm/barrier.h>
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
+#ifdef CONFIG_HAVE_MTD_MAP_BANK_WIDTH_1
#define map_bankwidth(map) 1
#define map_bankwidth_is_1(map) (map_bankwidth(map) == 1)
#define map_bankwidth_is_large(map) (0)
@@ -156,7 +156,7 @@ static inline int map_bankwidth(void *map)
static inline int map_bankwidth_supported(int w)
{
switch (w) {
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
+#ifdef CONFIG_HAVE_MTD_MAP_BANK_WIDTH_1
case 1:
#endif
#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/