Re: rb tree hrtimer lockup bug (found by perf_fuzzer)

[Greg KH]

On Mon, Mar 31, 2014 at 01:18:34PM +0200, Thomas Gleixner wrote:
> On Thu, 27 Mar 2014, Vince Weaver wrote:
> > On Wed, 26 Mar 2014, Thomas Gleixner wrote:
> > > Ok. So we know now what we are looking for.
> > > 
> > > [    1.579996] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > > ÿ[    1.607279] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> > > [    1.615032] kobject: 'ttyS1' (ffff88011772ac10): kobject_release, parent           (null) (delayed 250)
> > > [    1.624534] kobject: '(null)' (ffff8801177400f0): kobject_release, parent           (null) (delayed 500)
> > > [    1.654213] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
> > > 
> > > [    3.294047] Invalid timer base: tmr ffff880117740150 tmr->base           (null) base ffff880118898000
> > > 
> > > 1634110us : obj: ffff880117740130 initialized kobject_delayed_cleanup+0x0/0x90
> > > 
> > > So that happens in the context of the 8250 serial driver.
> > > 
> > > ...
> > > 
> > > Below is a patch which gives us the call path of the unnamed object
> > > which causes the crash.
> > 
> > I've attached the boot log with that patch applied.
> 
> Vince, can you please disable CONFIG_DEBUG_KOBJECT_RELEASE and remove
> all the debug patches to see whether the issue goes away?
> 
> I had a deeper look down that code path and the issue is, that the
> serial core is not compatible with the deferred kobject release.
> 
> The tty_io layer uses a kobject embedded in its internal tty device
> representation and reuses that.

It does?  What kobject is that?  I've dug through the code and I can't
find it.  I see where we create a new device in
tty_register_device_attr() which is dynamic and should be torn down when
free_tty_struct() is called eventually.

> So it seems that for whatever reason the tty layer releases ttyS1 and
> then initializes it again. So the deferred release will queue the
> object for release while the tty layer happily reinitializes it.

That's not good, but I can't find that code path, any hints?

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/