RE: 3.0 -> 3.10 regression? poweroff instead of reboot?

[Winkler, Tomas]

> 
> Hello Tomas,
> > I would need the devices ids of the MEI device on your platform (lspci  will do
> the job), is this same platform as you tested before?
> > You should not get to requesting the HW readiness w/ my patch.
> 
> yes, it's the same box.
> 
> here are the IDs:
> 
> 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
> Chipset Family MEI Controller #1 (rev 04)
> 00:16.1 Communication controller: Intel Corporation 6 Series/C200 Series
> Chipset Family MEI Controller #2 (rev 04)
> 
> 00:16.0 0780: 8086:1c3a (rev 04)
> 00:16.1 0780: 8086:1c3b (rev 04)

Are use you have the patch applied, because the driver just should not load. 
If any case  you dump the firmware status registers"
At offset 0x40 and 0x48 in PCI config space 
sudo hexdump -s 0x48 -n 4 /proc/bus/pci/00/16.0
sudo hexdump -s 0x40 -n 4 /proc/bus/pci/00/16.0

Thanks
Tomas

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/