Re: [PATCH 2/2] dma: Add Xilinx AXI Central Direct Memory Access Engine driver support
From: Srikanth Thokala
Date: Mon Apr 07 2014 - 10:53:20 EST
Hi,
Kindly review this driver and please let me know if you have any comments.
Thanks
Srikanth
On Mon, Mar 31, 2014 at 7:24 PM, Srikanth Thokala <sthokal@xxxxxxxxxx> wrote:
> This is the driver for the AXI Central Direct Memory Access (AXI
> CDMA) core, which is a soft Xilinx IP core that provides high-bandwidth
> Direct Memory Access (DMA) between a memory-mapped source address and a
> memory-mapped destination address.
>
> This module works on Zynq (ARM Based SoC) and Microblaze platforms.
>
> Signed-off-by: Srikanth Thokala <sthokal@xxxxxxxxxx>
> ---
> NOTE:
> - This driver patch is created on top of earlier series,
> 1/2 - "dma: Add Xilinx Video DMA DT Binding Documentation"
> 2/2 - "dma: Add Xilinx AXI Video Direct Memory Access Engine driver support"
> - Rebased on v3.14.0-rc8
> ---
> drivers/dma/Kconfig | 12 +
> drivers/dma/xilinx/Makefile | 1 +
> drivers/dma/xilinx/xilinx_cdma.c | 998 ++++++++++++++++++++++++++++++++++++++
> include/linux/amba/xilinx_dma.h | 15 +-
> 4 files changed, 1025 insertions(+), 1 deletion(-)
> create mode 100644 drivers/dma/xilinx/xilinx_cdma.c
>
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index 44b312e..e2c5cf2 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -365,6 +365,18 @@ config XILINX_VDMA
> channels, Memory Mapped to Stream (MM2S) and Stream to
> Memory Mapped (S2MM) for the data transfers.
>
> +config XILINX_CDMA
> + tristate "Xilinx AXI CDMA Engine"
> + depends on (ARCH_ZYNQ || MICROBLAZE)
> + select DMA_ENGINE
> + help
> + Enable support for Xilinx AXI CDMA Soft IP.
> +
> + The AXI CDMA is a soft IP which provides high-bandwidth
> + Direct Memory Access (DMA) between a memory-mapped source
> + address and a memory-mapped destination address using the
> + AXI4 protocol.
> +
> config DMA_ENGINE
> bool
>
> diff --git a/drivers/dma/xilinx/Makefile b/drivers/dma/xilinx/Makefile
> index 3c4e9f2..e1dee77 100644
> --- a/drivers/dma/xilinx/Makefile
> +++ b/drivers/dma/xilinx/Makefile
> @@ -1 +1,2 @@
> obj-$(CONFIG_XILINX_VDMA) += xilinx_vdma.o
> +obj-$(CONFIG_XILINX_CDMA) += xilinx_cdma.o
> diff --git a/drivers/dma/xilinx/xilinx_cdma.c b/drivers/dma/xilinx/xilinx_cdma.c
> new file mode 100644
> index 0000000..2ae7c77
> --- /dev/null
> +++ b/drivers/dma/xilinx/xilinx_cdma.c
> @@ -0,0 +1,998 @@
> +/*
> + * DMA driver for Xilinx Central DMA Engine
> + *
> + * Copyright (C) 2010 - 2014 Xilinx, Inc. All rights reserved.
> + *
> + * Based on the Freescale DMA driver.
> + *
> + * Description:
> + * The AXI CDMA, is a soft IP, which provides high-bandwidth Direct Memory
> + * Access (DMA) between a memory-mapped source address and a memory-mapped
> + * destination address.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/amba/xilinx_dma.h>
> +#include <linux/bitops.h>
> +#include <linux/dmapool.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_dma.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/slab.h>
> +
> +#include "../dmaengine.h"
> +
> +/* Register Offsets */
> +#define XILINX_CDMA_CONTROL_OFFSET 0x00
> +#define XILINX_CDMA_STATUS_OFFSET 0x04
> +#define XILINX_CDMA_CDESC_OFFSET 0x08
> +#define XILINX_CDMA_TDESC_OFFSET 0x10
> +#define XILINX_CDMA_SRCADDR_OFFSET 0x18
> +#define XILINX_CDMA_DSTADDR_OFFSET 0x20
> +#define XILINX_CDMA_BTT_OFFSET 0x28
> +
> +/* General register bits definitions */
> +#define XILINX_CDMA_CR_RESET BIT(2)
> +#define XILINX_CDMA_CR_SGMODE BIT(3)
> +
> +#define XILINX_CDMA_SR_IDLE BIT(1)
> +
> +#define XILINX_CDMA_XR_IRQ_IOC_MASK BIT(12)
> +#define XILINX_CDMA_XR_IRQ_DELAY_MASK BIT(13)
> +#define XILINX_CDMA_XR_IRQ_ERROR_MASK BIT(14)
> +#define XILINX_CDMA_XR_IRQ_ALL_MASK GENMASK(14, 12)
> +
> +#define XILINX_CDMA_XR_DELAY_MASK GENMASK(31, 24)
> +#define XILINX_CDMA_XR_COALESCE_MASK GENMASK(23, 16)
> +
> +#define XILINX_CDMA_DELAY_MAX GENMASK(7, 0)
> +#define XILINX_CDMA_DELAY_SHIFT 24
> +
> +#define XILINX_CDMA_COALESCE_MAX GENMASK(7, 0)
> +#define XILINX_CDMA_COALESCE_SHIFT 16
> +
> +/* Delay loop counter to prevent hardware failure */
> +#define XILINX_CDMA_RESET_LOOP 1000000
> +
> +/* Maximum transfer length */
> +#define XILINX_CDMA_MAX_TRANS_LEN GENMASK(22, 0)
> +
> +/**
> + * struct xilinx_cdma_desc_hw - Hardware Descriptor
> + * @next_desc: Next Descriptor Pointer @0x00
> + * @pad1: Reserved @0x04
> + * @src_addr: Source address @0x08
> + * @pad2: Reserved @0x0C
> + * @dest_addr: Destination address @0x10
> + * @pad3: Reserved @0x14
> + * @control: Control field @0x18
> + * @status: Status field @0x1C
> + */
> +struct xilinx_cdma_desc_hw {
> + u32 next_desc;
> + u32 pad1;
> + u32 src_addr;
> + u32 pad2;
> + u32 dest_addr;
> + u32 pad3;
> + u32 control;
> + u32 status;
> +} __aligned(64);
> +
> +/**
> + * struct xilinx_cdma_tx_segment - Descriptor segment
> + * @hw: Hardware descriptor
> + * @node: Node in the descriptor segments list
> + * @phys: Physical address of segment
> + */
> +struct xilinx_cdma_tx_segment {
> + struct xilinx_cdma_desc_hw hw;
> + struct list_head node;
> + dma_addr_t phys;
> +} __aligned(64);
> +
> +/**
> + * struct xilinx_cdma_tx_descriptor - Per Transaction structure
> + * @async_tx: Async transaction descriptor
> + * @segments: TX segments list
> + * @node: Node in the channel descriptors list
> + */
> +struct xilinx_cdma_tx_descriptor {
> + struct dma_async_tx_descriptor async_tx;
> + struct list_head segments;
> + struct list_head node;
> +};
> +
> +/**
> + * struct xilinx_cdma_chan - Driver specific cdma channel structure
> + * @xdev: Driver specific device structure
> + * @lock: Descriptor operation lock
> + * @done_list: Complete descriptors
> + * @pending_list: Descriptors waiting
> + * @active_desc: Active descriptor
> + * @allocated_desc: Allocated descriptor
> + * @common: DMA common channel
> + * @desc_pool: Descriptors pool
> + * @dev: The dma device
> + * @irq: Channel IRQ
> + * @has_sg: Support scatter transfers
> + * @err: Channel has errors
> + * @tasklet: Cleanup work after irq
> + */
> +struct xilinx_cdma_chan {
> + struct xilinx_cdma_device *xdev;
> + spinlock_t lock;
> + struct list_head done_list;
> + struct list_head pending_list;
> + struct xilinx_cdma_tx_descriptor *active_desc;
> + struct xilinx_cdma_tx_descriptor *allocated_desc;
> + struct dma_chan common;
> + struct dma_pool *desc_pool;
> + struct device *dev;
> + int irq;
> + bool has_sg;
> + int err;
> + struct tasklet_struct tasklet;
> +};
> +
> +/**
> + * struct xilinx_cdma_device - CDMA device structure
> + * @regs: I/O mapped base address
> + * @dev: Device Structure
> + * @common: DMA device structure
> + * @chan: Driver specific cdma channel
> + * @has_sg: Specifies whether Scatter-Gather is present or not
> + */
> +struct xilinx_cdma_device {
> + void __iomem *regs;
> + struct device *dev;
> + struct dma_device common;
> + struct xilinx_cdma_chan *chan;
> + bool has_sg;
> +};
> +
> +/* Macros */
> +#define to_xilinx_chan(chan) \
> + container_of(chan, struct xilinx_cdma_chan, common)
> +#define to_cdma_tx_descriptor(tx) \
> + container_of(tx, struct xilinx_cdma_tx_descriptor, async_tx)
> +
> +/* IO accessors */
> +static inline void cdma_write(struct xilinx_cdma_chan *chan, u32 reg, u32 val)
> +{
> + writel(val, chan->xdev->regs + reg);
> +}
> +
> +static inline u32 cdma_read(struct xilinx_cdma_chan *chan, u32 reg)
> +{
> + return readl(chan->xdev->regs + reg);
> +}
> +
> +static inline void cdma_ctrl_clr(struct xilinx_cdma_chan *chan, u32 reg,
> + u32 clr)
> +{
> + cdma_write(chan, reg, cdma_read(chan, reg) & ~clr);
> +}
> +
> +static inline void cdma_ctrl_set(struct xilinx_cdma_chan *chan, u32 reg,
> + u32 set)
> +{
> + cdma_write(chan, reg, cdma_read(chan, reg) | set);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Descriptors and segments alloc and free
> + */
> +
> +/**
> + * xilinx_cdma_alloc_tx_segment - Allocate transaction segment
> + * @chan: Driver specific cdma channel
> + *
> + * Return: The allocated segment on success and NULL on failure.
> + */
> +static struct xilinx_cdma_tx_segment *
> +xilinx_cdma_alloc_tx_segment(struct xilinx_cdma_chan *chan)
> +{
> + struct xilinx_cdma_tx_segment *segment;
> + dma_addr_t phys;
> +
> + segment = dma_pool_alloc(chan->desc_pool, GFP_ATOMIC, &phys);
> + if (!segment)
> + return NULL;
> +
> + memset(segment, 0, sizeof(*segment));
> + segment->phys = phys;
> +
> + return segment;
> +}
> +
> +/**
> + * xilinx_cdma_free_tx_segment - Free transaction segment
> + * @chan: Driver specific cdma channel
> + * @segment: cdma transaction segment
> + */
> +static void xilinx_cdma_free_tx_segment(struct xilinx_cdma_chan *chan,
> + struct xilinx_cdma_tx_segment *segment)
> +{
> + dma_pool_free(chan->desc_pool, segment, segment->phys);
> +}
> +
> +/**
> + * xilinx_cdma_tx_descriptor - Allocate transaction descriptor
> + * @chan: Driver specific cdma channel
> + *
> + * Return: The allocated descriptor on success and NULL on failure.
> + */
> +static struct xilinx_cdma_tx_descriptor *
> +xilinx_cdma_alloc_tx_descriptor(struct xilinx_cdma_chan *chan)
> +{
> + struct xilinx_cdma_tx_descriptor *desc;
> + unsigned long flags;
> +
> + if (chan->allocated_desc)
> + return chan->allocated_desc;
> +
> + desc = kzalloc(sizeof(*desc), GFP_KERNEL);
> + if (!desc)
> + return NULL;
> +
> + spin_lock_irqsave(&chan->lock, flags);
> + chan->allocated_desc = desc;
> + spin_unlock_irqrestore(&chan->lock, flags);
> +
> + INIT_LIST_HEAD(&desc->segments);
> +
> + return desc;
> +}
> +
> +/**
> + * xilinx_cdma_free_tx_descriptor - Free transaction descriptor
> + * @chan: Driver specific cdma channel
> + * @desc: cdma transaction descriptor
> + */
> +static void
> +xilinx_cdma_free_tx_descriptor(struct xilinx_cdma_chan *chan,
> + struct xilinx_cdma_tx_descriptor *desc)
> +{
> + struct xilinx_cdma_tx_segment *segment, *next;
> +
> + if (!desc)
> + return;
> +
> + list_for_each_entry_safe(segment, next, &desc->segments, node) {
> + list_del(&segment->node);
> + xilinx_cdma_free_tx_segment(chan, segment);
> + }
> +
> + kfree(desc);
> +}
> +
> +/**
> + * xilinx_cdma_alloc_chan_resources - Allocate channel resources
> + * @dchan: DMA channel
> + *
> + * Return: '0' on success and failure value on error
> + */
> +static int xilinx_cdma_alloc_chan_resources(struct dma_chan *dchan)
> +{
> + struct xilinx_cdma_chan *chan = to_xilinx_chan(dchan);
> +
> + /* Has this channel already been allocated? */
> + if (chan->desc_pool)
> + return 0;
> +
> + /*
> + * We need the descriptor to be aligned to 64bytes
> + * for meeting Xilinx DMA specification requirement.
> + */
> + chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
> + chan->dev,
> + sizeof(struct xilinx_cdma_tx_segment),
> + __alignof__(struct xilinx_cdma_tx_segment), 0);
> + if (!chan->desc_pool) {
> + dev_err(chan->dev,
> + "unable to allocate channel descriptor pool\n");
> + return -ENOMEM;
> + }
> +
> + dma_cookie_init(dchan);
> + return 0;
> +}
> +
> +/**
> + * xilinx_cdma_free_desc_list - Free descriptors list
> + * @chan: Driver specific cdma channel
> + * @list: List to parse and delete the descriptor
> + */
> +static void xilinx_cdma_free_desc_list(struct xilinx_cdma_chan *chan,
> + struct list_head *list)
> +{
> + struct xilinx_cdma_tx_descriptor *desc, *next;
> +
> + list_for_each_entry_safe(desc, next, list, node) {
> + list_del(&desc->node);
> + xilinx_cdma_free_tx_descriptor(chan, desc);
> + }
> +}
> +
> +/**
> + * xilinx_cdma_free_chan_resources - Free channel resources
> + * @dchan: DMA channel
> + */
> +static void xilinx_cdma_free_chan_resources(struct dma_chan *dchan)
> +{
> + struct xilinx_cdma_chan *chan = to_xilinx_chan(dchan);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&chan->lock, flags);
> + xilinx_cdma_free_desc_list(chan, &chan->done_list);
> + xilinx_cdma_free_desc_list(chan, &chan->pending_list);
> + spin_unlock_irqrestore(&chan->lock, flags);
> +
> + dma_pool_destroy(chan->desc_pool);
> + chan->desc_pool = NULL;
> +}
> +
> +/**
> + * xilinx_cdma_chan_desc_cleanup - Clean channel descriptors
> + * @chan: Driver specific cdma channel
> + */
> +static void xilinx_cdma_chan_desc_cleanup(struct xilinx_cdma_chan *chan)
> +{
> + struct xilinx_cdma_tx_descriptor *desc, *next;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&chan->lock, flags);
> +
> + list_for_each_entry_safe(desc, next, &chan->done_list, node) {
> + dma_async_tx_callback callback;
> + void *callback_param;
> +
> + /* Remove from the list of running transactions */
> + list_del(&desc->node);
> +
> + /* Run the link descriptor callback function */
> + callback = desc->async_tx.callback;
> + callback_param = desc->async_tx.callback_param;
> + if (callback) {
> + spin_unlock_irqrestore(&chan->lock, flags);
> + callback(callback_param);
> + spin_lock_irqsave(&chan->lock, flags);
> + }
> +
> + /* Run any dependencies, then free the descriptor */
> + dma_run_dependencies(&desc->async_tx);
> + xilinx_cdma_free_tx_descriptor(chan, desc);
> + }
> +
> + spin_unlock_irqrestore(&chan->lock, flags);
> +}
> +
> +/**
> + * xilinx_cdma_tx_status - Get CDMA transaction status
> + * @dchan: DMA channel
> + * @cookie: Transaction identifier
> + * @txstate: Transaction state
> + *
> + * Return: DMA transaction status
> + */
> +static enum dma_status xilinx_tx_status(struct dma_chan *dchan,
> + dma_cookie_t cookie,
> + struct dma_tx_state *txstate)
> +{
> + return dma_cookie_status(dchan, cookie, txstate);
> +}
> +
> +/**
> + * xilinx_cdma_is_idle - Check if cdma channel is idle
> + * @chan: Driver specific cdma channel
> + *
> + * Return: 'true' if idle, 'false' if not.
> + */
> +static bool cdma_is_idle(struct xilinx_cdma_chan *chan)
> +{
> + return cdma_read(chan, XILINX_CDMA_STATUS_OFFSET) & XILINX_CDMA_SR_IDLE;
> +}
> +
> +/**
> + * xilinx_cdma_start_transfer - Starts cdma transfer
> + * @chan: Driver specific channel struct pointer
> + */
> +static void xilinx_cdma_start_transfer(struct xilinx_cdma_chan *chan)
> +{
> + unsigned long flags;
> + struct xilinx_cdma_tx_descriptor *desc;
> + struct xilinx_cdma_tx_segment *head, *tail;
> +
> + if (chan->err)
> + return;
> +
> + spin_lock_irqsave(&chan->lock, flags);
> +
> + if (list_empty(&chan->pending_list))
> + goto out_unlock;
> +
> + /* If hardware is busy, cannot submit */
> + if (!cdma_is_idle(chan)) {
> + dev_dbg(chan->dev, "DMA controller still busy %x\n",
> + cdma_read(chan, XILINX_CDMA_STATUS_OFFSET));
> + goto out_unlock;
> + }
> +
> + desc = list_first_entry(&chan->pending_list,
> + struct xilinx_cdma_tx_descriptor, node);
> +
> + if (chan->has_sg) {
> + head = list_first_entry(&desc->segments,
> + struct xilinx_cdma_tx_segment, node);
> + tail = list_entry(desc->segments.prev,
> + struct xilinx_cdma_tx_segment, node);
> +
> + cdma_write(chan, XILINX_CDMA_CDESC_OFFSET, head->phys);
> +
> + /* Update tail ptr register which will start the transfer */
> + cdma_write(chan, XILINX_CDMA_TDESC_OFFSET, tail->phys);
> + } else {
> + /* In simple mode */
> + struct xilinx_cdma_tx_segment *segment;
> + struct xilinx_cdma_desc_hw *hw;
> +
> + segment = list_first_entry(&desc->segments,
> + struct xilinx_cdma_tx_segment,
> + node);
> +
> + hw = &segment->hw;
> +
> + cdma_write(chan, XILINX_CDMA_SRCADDR_OFFSET, hw->src_addr);
> + cdma_write(chan, XILINX_CDMA_DSTADDR_OFFSET, hw->dest_addr);
> +
> + /* Start the transfer */
> + cdma_write(chan, XILINX_CDMA_BTT_OFFSET,
> + hw->control & XILINX_CDMA_MAX_TRANS_LEN);
> + }
> +
> + list_del(&desc->node);
> + chan->active_desc = desc;
> +
> +out_unlock:
> + spin_unlock_irqrestore(&chan->lock, flags);
> +}
> +
> +/**
> + * xilinx_cdma_issue_pending - Issue pending transactions
> + * @dchan: DMA channel
> + */
> +static void xilinx_cdma_issue_pending(struct dma_chan *dchan)
> +{
> + struct xilinx_cdma_chan *chan = to_xilinx_chan(dchan);
> +
> + xilinx_cdma_start_transfer(chan);
> +}
> +
> +/**
> + * xilinx_cdma_complete_descriptor - Mark the active descriptor as complete
> + * @chan : xilinx DMA channel
> + */
> +static void xilinx_cdma_complete_descriptor(struct xilinx_cdma_chan *chan)
> +{
> + struct xilinx_cdma_tx_descriptor *desc;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&chan->lock, flags);
> +
> + desc = chan->active_desc;
> + if (!desc) {
> + dev_dbg(chan->dev, "no running descriptors\n");
> + goto out_unlock;
> + }
> +
> + dma_cookie_complete(&desc->async_tx);
> + list_add_tail(&desc->node, &chan->done_list);
> +
> + chan->active_desc = NULL;
> +
> +out_unlock:
> + spin_unlock_irqrestore(&chan->lock, flags);
> +}
> +
> +/**
> + * xilinx_cdma_chan_reset - Reset CDMA channel
> + * @chan: Driver specific CDMA channel
> + *
> + * Return: '0' on success and failure value on error
> + */
> +static int xilinx_cdma_chan_reset(struct xilinx_cdma_chan *chan)
> +{
> + int loop = XILINX_CDMA_RESET_LOOP;
> + u32 tmp;
> +
> + cdma_ctrl_set(chan, XILINX_CDMA_CONTROL_OFFSET,
> + XILINX_CDMA_CR_RESET);
> +
> + tmp = cdma_read(chan, XILINX_CDMA_CONTROL_OFFSET) &
> + XILINX_CDMA_CR_RESET;
> +
> + /* Wait for the hardware to finish reset */
> + do {
> + tmp = cdma_read(chan, XILINX_CDMA_CONTROL_OFFSET) &
> + XILINX_CDMA_CR_RESET;
> + } while (loop-- && tmp);
> +
> + if (!loop) {
> + dev_err(chan->dev, "reset timeout, cr %x, sr %x\n",
> + cdma_read(chan, XILINX_CDMA_CONTROL_OFFSET),
> + cdma_read(chan, XILINX_CDMA_STATUS_OFFSET));
> + return -EBUSY;
> + }
> +
> + /* Enable interrupts */
> + cdma_ctrl_set(chan, XILINX_CDMA_CONTROL_OFFSET,
> + XILINX_CDMA_XR_IRQ_ALL_MASK);
> +
> + /* Enable SG Mode */
> + if (chan->has_sg)
> + cdma_ctrl_set(chan, XILINX_CDMA_CONTROL_OFFSET,
> + XILINX_CDMA_CR_SGMODE);
> +
> + return 0;
> +}
> +
> +/**
> + * xilinx_cdma_irq_handler - CDMA Interrupt handler
> + * @irq: IRQ number
> + * @data: Pointer to the Xilinx CDMA channel structure
> + *
> + * Return: IRQ_HANDLED/IRQ_NONE
> +*/
> +static irqreturn_t xilinx_cdma_irq_handler(int irq, void *data)
> +{
> + struct xilinx_cdma_chan *chan = data;
> + u32 status;
> +
> + status = cdma_read(chan, XILINX_CDMA_STATUS_OFFSET);
> + if (!(status & XILINX_CDMA_XR_IRQ_ALL_MASK))
> + return IRQ_NONE;
> +
> + /* Ack the interrupts */
> + cdma_write(chan, XILINX_CDMA_STATUS_OFFSET,
> + XILINX_CDMA_XR_IRQ_ALL_MASK);
> +
> + if (status & XILINX_CDMA_XR_IRQ_ERROR_MASK) {
> + dev_err(chan->dev,
> + "Channel %x has errors %x, cdr %x tdr %x\n",
> + (u32)chan,
> + (u32)cdma_read(chan, XILINX_CDMA_STATUS_OFFSET),
> + (u32)cdma_read(chan, XILINX_CDMA_CDESC_OFFSET),
> + (u32)cdma_read(chan, XILINX_CDMA_TDESC_OFFSET));
> + chan->err = true;
> + }
> +
> + /*
> + * Device takes too long to do the transfer when user requires
> + * responsiveness
> + */
> + if (status & XILINX_CDMA_XR_IRQ_DELAY_MASK)
> + dev_dbg(chan->dev, "Inter-packet latency too long\n");
> +
> + if (status & XILINX_CDMA_XR_IRQ_IOC_MASK) {
> + xilinx_cdma_complete_descriptor(chan);
> + xilinx_cdma_start_transfer(chan);
> + }
> +
> + tasklet_schedule(&chan->tasklet);
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * xilinx_cdma_do_tasklet - Schedule completion tasklet
> + * @data: Pointer to the Xilinx cdma channel structure
> + */
> +static void xilinx_cdma_do_tasklet(unsigned long data)
> +{
> + struct xilinx_cdma_chan *chan = (struct xilinx_cdma_chan *)data;
> +
> + xilinx_cdma_chan_desc_cleanup(chan);
> +}
> +
> +/**
> + * xilinx_cdma_tx_submit - Submit DMA transaction
> + * @tx: Async transaction descriptor
> + *
> + * Return: cookie value on success and failure value on error
> + */
> +static dma_cookie_t xilinx_cdma_tx_submit(struct dma_async_tx_descriptor *tx)
> +{
> + struct xilinx_cdma_chan *chan = to_xilinx_chan(tx->chan);
> + struct xilinx_cdma_tx_descriptor *desc = to_cdma_tx_descriptor(tx);
> + dma_cookie_t cookie;
> + unsigned long flags;
> + int err;
> +
> + if (chan->err) {
> + /*
> + * If reset fails, need to hard reset the system.
> + * Channel is no longer functional
> + */
> + err = xilinx_cdma_chan_reset(chan);
> + if (err < 0)
> + return err;
> + }
> +
> + spin_lock_irqsave(&chan->lock, flags);
> +
> + cookie = dma_cookie_assign(tx);
> +
> + /* Append the transaction to the pending transactions queue. */
> + list_add_tail(&desc->node, &chan->pending_list);
> +
> + /* Free the allocated desc */
> + chan->allocated_desc = NULL;
> +
> + spin_unlock_irqrestore(&chan->lock, flags);
> +
> + return cookie;
> +}
> +
> +/**
> + * xilinx_cdma_prep_memcpy - prepare descriptors for a memcpy transaction
> + * @dchan: DMA channel
> + * @dma_dst: destination address
> + * @dma_src: source address
> + * @len: transfer length
> + * @flags: transfer ack flags
> + *
> + * Return: Async transaction descriptor on success and NULL on failure
> + */
> +static struct dma_async_tx_descriptor *
> +xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
> + dma_addr_t dma_src, size_t len, unsigned long flags)
> +{
> + struct xilinx_cdma_chan *chan = to_xilinx_chan(dchan);
> + struct xilinx_cdma_desc_hw *hw;
> + struct xilinx_cdma_tx_descriptor *desc;
> + struct xilinx_cdma_tx_segment *segment, *prev;
> +
> + if (!len || len > XILINX_CDMA_MAX_TRANS_LEN)
> + return NULL;
> +
> + desc = xilinx_cdma_alloc_tx_descriptor(chan);
> + if (!desc)
> + return NULL;
> +
> + dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
> + desc->async_tx.tx_submit = xilinx_cdma_tx_submit;
> + async_tx_ack(&desc->async_tx);
> +
> + /* Allocate the link descriptor from DMA pool */
> + segment = xilinx_cdma_alloc_tx_segment(chan);
> + if (!segment)
> + goto error;
> +
> + hw = &segment->hw;
> + hw->control = len;
> + hw->src_addr = dma_src;
> + hw->dest_addr = dma_dst;
> +
> + /* Fill the previous next descriptor with current */
> + prev = list_last_entry(&desc->segments,
> + struct xilinx_cdma_tx_segment, node);
> + prev->hw.next_desc = segment->phys;
> +
> + /* Insert the segment into the descriptor segments list. */
> + list_add_tail(&segment->node, &desc->segments);
> +
> + prev = segment;
> +
> + /* Link the last hardware descriptor with the first. */
> + segment = list_first_entry(&desc->segments,
> + struct xilinx_cdma_tx_segment, node);
> + prev->hw.next_desc = segment->phys;
> +
> + return &desc->async_tx;
> +
> +error:
> + xilinx_cdma_free_tx_descriptor(chan, desc);
> + return NULL;
> +}
> +
> +/**
> + * xilinx_cdma_device_control - Configure DMA channel of the device
> + * @dchan: DMA Channel pointer
> + * @cmd: DMA control command
> + * @arg: Channel configuration
> + *
> + * Return: '0' on success and failure value on error
> + */
> +static int xilinx_cdma_device_control(struct dma_chan *dchan,
> + enum dma_ctrl_cmd cmd, unsigned long arg)
> +{
> + struct xilinx_cdma_chan *chan = to_xilinx_chan(dchan);
> + unsigned long flags;
> +
> + if (cmd != DMA_TERMINATE_ALL)
> + return -ENXIO;
> +
> + spin_lock_irqsave(&chan->lock, flags);
> +
> + /* Remove and free all of the descriptors in the lists */
> + xilinx_cdma_free_desc_list(chan, &chan->pending_list);
> + xilinx_cdma_free_desc_list(chan, &chan->done_list);
> +
> + spin_unlock_irqrestore(&chan->lock, flags);
> +
> + return 0;
> +}
> +
> +/**
> + * xilinx_cdma_channel_set_config - Configure cdma channel
> + * @dchan: DMA channel
> + * @cfg: cdma device configuration pointer
> + *
> + * Return: '0' on success and failure value on error
> + */
> +int xilinx_cdma_channel_set_config(struct dma_chan *dchan,
> + struct xilinx_cdma_config *cfg)
> +{
> + struct xilinx_cdma_chan *chan = to_xilinx_chan(dchan);
> + u32 reg = cdma_read(chan, XILINX_CDMA_CONTROL_OFFSET);
> +
> + if (cfg->reset)
> + return xilinx_cdma_chan_reset(chan);
> +
> + if (cfg->coalesc <= XILINX_CDMA_COALESCE_MAX) {
> + reg &= ~XILINX_CDMA_XR_COALESCE_MASK;
> + reg |= cfg->coalesc << XILINX_CDMA_COALESCE_SHIFT;
> + }
> +
> + if (cfg->delay <= XILINX_CDMA_DELAY_MAX) {
> + reg &= ~XILINX_CDMA_XR_DELAY_MASK;
> + reg |= cfg->delay << XILINX_CDMA_DELAY_SHIFT;
> + }
> +
> + cdma_write(chan, XILINX_CDMA_CONTROL_OFFSET, reg);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(xilinx_cdma_channel_set_config);
> +
> +/* -----------------------------------------------------------------------------
> + * Probe and remove
> + */
> +
> +/**
> + * xilinx_cdma_free_channel - Channel remove function
> + * @chan: Driver specific cdma channel
> + */
> +static void xilinx_cdma_free_channel(struct xilinx_cdma_chan *chan)
> +{
> + /* Disable Interrupts */
> + cdma_ctrl_clr(chan, XILINX_CDMA_CONTROL_OFFSET,
> + XILINX_CDMA_XR_IRQ_ALL_MASK);
> +
> + if (chan->irq > 0)
> + free_irq(chan->irq, chan);
> +
> + tasklet_kill(&chan->tasklet);
> +
> + list_del(&chan->common.device_node);
> +}
> +
> +/**
> + * xilinx_cdma_chan_probe - Per Channel Probing
> + * It get channel features from the device tree entry and
> + * initialize special channel handling routines
> + *
> + * @xdev: Driver specific device structure
> + * @node: Device node
> + *
> + * Return: '0' on success and failure value on error
> + */
> +static int xilinx_cdma_chan_probe(struct xilinx_cdma_device *xdev,
> + struct device_node *node)
> +{
> + struct xilinx_cdma_chan *chan;
> + bool has_dre;
> + u32 value, width;
> + int err;
> +
> + /* Alloc channel */
> + chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
> + if (!chan)
> + return -ENOMEM;
> +
> + chan->dev = xdev->dev;
> + chan->has_sg = xdev->has_sg;
> + chan->xdev = xdev;
> +
> + spin_lock_init(&chan->lock);
> + INIT_LIST_HEAD(&chan->pending_list);
> + INIT_LIST_HEAD(&chan->done_list);
> +
> + /* Retrieve the channel properties from the device tree */
> + has_dre = of_property_read_bool(node, "xlnx,include-dre");
> +
> + err = of_property_read_u32(node, "xlnx,datawidth", &value);
> + if (err) {
> + dev_err(xdev->dev, "unable to read datawidth property");
> + return err;
> + }
> + width = value >> 3; /* convert bits to bytes */
> +
> + /* If data width is greater than 8 bytes, DRE is not in hw */
> + if (width > 8)
> + has_dre = false;
> +
> + if (!has_dre)
> + xdev->common.copy_align = fls(width - 1);
> +
> + /* Request the interrupt */
> + chan->irq = irq_of_parse_and_map(node, 0);
> + err = request_irq(chan->irq, xilinx_cdma_irq_handler, IRQF_SHARED,
> + "xilinx-cdma-controller", chan);
> + if (err) {
> + dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
> + return err;
> + }
> +
> + /* Initialize the tasklet */
> + tasklet_init(&chan->tasklet, xilinx_cdma_do_tasklet,
> + (unsigned long)chan);
> +
> + /*
> + * Initialize the DMA channel and add it to the DMA engine channels
> + * list.
> + */
> + chan->common.device = &xdev->common;
> +
> + list_add_tail(&chan->common.device_node, &xdev->common.channels);
> + xdev->chan = chan;
> +
> + /* Initialize the channel */
> + err = xilinx_cdma_chan_reset(chan);
> + if (err) {
> + dev_err(xdev->dev, "Reset channel failed\n");
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * of_dma_xilinx_xlate - Translation function
> + * @dma_spec: Pointer to DMA specifier as found in the device tree
> + * @ofdma: Pointer to DMA controller data
> + *
> + * Return: DMA channel pointer on success and NULL on error
> + */
> +static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
> + struct of_dma *ofdma)
> +{
> + struct xilinx_cdma_device *xdev = ofdma->of_dma_data;
> +
> + return dma_get_slave_channel(&xdev->chan->common);
> +}
> +
> +/**
> + * xilinx_cdma_probe - Driver probe function
> + * @pdev: Pointer to the platform_device structure
> + *
> + * Return: '0' on success and failure value on error
> + */
> +static int xilinx_cdma_probe(struct platform_device *pdev)
> +{
> + struct xilinx_cdma_device *xdev;
> + struct device_node *child, *node;
> + struct resource *res;
> + int ret;
> +
> + xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
> + if (!xdev)
> + return -ENOMEM;
> +
> + xdev->dev = &(pdev->dev);
> + INIT_LIST_HEAD(&xdev->common.channels);
> +
> + node = pdev->dev.of_node;
> +
> + /* Map the registers */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + xdev->regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(xdev->regs))
> + return PTR_ERR(xdev->regs);
> +
> + /* Check if SG is enabled */
> + xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
> +
> + dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
> + xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
> +
> + xdev->common.device_control = xilinx_cdma_device_control;
> + xdev->common.device_issue_pending = xilinx_cdma_issue_pending;
> + xdev->common.device_alloc_chan_resources =
> + xilinx_cdma_alloc_chan_resources;
> + xdev->common.device_free_chan_resources =
> + xilinx_cdma_free_chan_resources;
> + xdev->common.device_tx_status = xilinx_tx_status;
> + xdev->common.dev = &pdev->dev;
> +
> + platform_set_drvdata(pdev, xdev);
> +
> + child = of_get_next_child(node, NULL);
> + if (!child) {
> + dev_err(&pdev->dev, "No channel found\n");
> + return PTR_ERR(child);
> + }
> +
> + ret = xilinx_cdma_chan_probe(xdev, child);
> + if (ret) {
> + dev_err(&pdev->dev, "Probing channel failed\n");
> + goto free_chan_resources;
> + }
> +
> + dma_async_device_register(&xdev->common);
> +
> + ret = of_dma_controller_register(node, of_dma_xilinx_xlate, xdev);
> + if (ret) {
> + dev_err(&pdev->dev, "Unable to register DMA to DT\n");
> + dma_async_device_unregister(&xdev->common);
> + goto free_chan_resources;
> + }
> +
> + dev_info(&pdev->dev, "Xilinx AXI CDMA Engine driver Probed!!\n");
> +
> + return 0;
> +
> +free_chan_resources:
> + xilinx_cdma_free_channel(xdev->chan);
> +
> + return ret;
> +}
> +
> +/**
> + * xilinx_cdma_remove - Driver remove function
> + * @pdev: Pointer to the platform_device structure
> + *
> + * Return: Always '0'
> + */
> +static int xilinx_cdma_remove(struct platform_device *pdev)
> +{
> + struct xilinx_cdma_device *xdev = platform_get_drvdata(pdev);
> +
> + of_dma_controller_free(pdev->dev.of_node);
> + dma_async_device_unregister(&xdev->common);
> +
> + xilinx_cdma_free_channel(xdev->chan);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id xilinx_cdma_of_match[] = {
> + { .compatible = "xlnx,axi-cdma-1.00.a", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, xilinx_cdma_of_match);
> +
> +static struct platform_driver xilinx_cdma_driver = {
> + .driver = {
> + .name = "xilinx-cdma",
> + .owner = THIS_MODULE,
> + .of_match_table = xilinx_cdma_of_match,
> + },
> + .probe = xilinx_cdma_probe,
> + .remove = xilinx_cdma_remove,
> +};
> +
> +module_platform_driver(xilinx_cdma_driver);
> +
> +MODULE_AUTHOR("Xilinx, Inc.");
> +MODULE_DESCRIPTION("Xilinx CDMA driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/amba/xilinx_dma.h b/include/linux/amba/xilinx_dma.h
> index 34b98f2..fb74ff7 100644
> --- a/include/linux/amba/xilinx_dma.h
> +++ b/include/linux/amba/xilinx_dma.h
> @@ -41,7 +41,20 @@ struct xilinx_vdma_config {
> int ext_fsync;
> };
>
> +/**
> + * struct xilinx_cdma_config - CDMA Configuration structure
> + * @coalesc: Interrupt coalescing threshold
> + * @delay: Delay counter
> + * @reset: Reset Channel
> + */
> +struct xilinx_cdma_config {
> + int coalesc;
> + int delay;
> + int reset;
> +};
> +
> int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
> struct xilinx_vdma_config *cfg);
> -
> +int xilinx_cdma_channel_set_config(struct dma_chan *dchan,
> + struct xilinx_cdma_config *cfg);
> #endif
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/