Re: [PATCH 2/3] gpio: dwapb: do not create the irq mapping upfront.

[Linus Walleij]

On Tue, Mar 25, 2014 at 10:17 PM, Sebastian Andrzej Siewior
<bigeasy@xxxxxxxxxxxxx> wrote:
> * Linus Walleij | 2014-03-25 21:43:49 [+0100]:
>
>>> I looked at
>>> those two links and you quote gpio_to_irq() which is not required.
>>
>>In a *lot* of drivers it is implicitly required that gpio_to_irq()
>>is called first because they only call irq_create_mapping()
>>there. (And not in subsequent interrupt handlers etc.)
>
> so
>
> --- a/drivers/gpio/gpio-dwapb.c
> +++ b/drivers/gpio/gpio-dwapb.c
> @@ -68,7 +68,7 @@ static int dwapb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
>                                                     dwapb_gpio_port, bgc);
>         struct dwapb_gpio *gpio = port->gpio;
>
> -       return irq_find_mapping(gpio->domain, offset);
> +       return irq_create_mapping(gpio->domain, offset);
>  }
>
>  static void dwapb_toggle_trigger(struct dwapb_gpio *gpio, unsigned int offs)
>
> would fix the problem then.

No.

This only gets called if some GPIO consumer decides to call
gpio_to_irq() to find out the interrupt number before using the
interrupt.

There is no requirement that consumers do that!

It is perfectly legal for a GPIO irq comsumer to just use
some hard-coded IRQ number from a board file or similar,
or to just use an IRQ from a DT or ACPI entity without any
such translation.

So the mappings must be created in probe().

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/