Re: [PATCH] tick, broadcast: Prevent false alarm when force mask contains offline cpus

[Preeti U Murthy]

Hi Thomas,
Any comments on this patch?

Regards
Preeti U Murthy

On 04/01/2014 11:02 AM, Preeti U Murthy wrote:
> On 03/28/2014 02:17 PM, Srivatsa S. Bhat wrote:
>> On 03/27/2014 03:44 PM, Preeti U Murthy wrote:
>>> On 03/27/2014 11:58 AM, Srivatsa S. Bhat wrote:
>>>>
>>>> Actually, my suggestion was to remove the dying CPU from the force_mask alone,
>>>> in the CPU_DYING notifier. The rest of the cleanup (removing it from the other
>>>> masks, moving the broadcast duty to someone else etc can still be done at
>>>> the CPU_DEAD stage). Also, note that the CPU which is set in force_mask is
>>>> definitely not the one doing the broadcast.
>>>>
>>>> Basically, my reasoning was this:
>>>>
>>>> If we look at how the 3 broadcast masks (oneshot, pending and force) are
>>>> set and cleared during idle entry/exit, we see this pattern:
>>>>
>>>> oneshot_mask: This is set at BROADCAST_ENTER and cleared at EXIT.
>>>> pending_mask: This is set at tick_handle_oneshot_broadcast and cleared at
>>>>               EXIT.
>>>> force_mask:   This is set at EXIT and cleared at the next call to
>>>>               tick_handle_oneshot_broadcast. (Also, if the CPU is set in this
>>>>               mask, the CPU doesn't enter deep idle states in subsequent
>>>>               idle durations, and keeps polling instead, until it gets the
>>>>               broadcast interrupt).
>>>>
>>>> What we can derive from this is that force_mask is the only mask that can
>>>> remain set across an idle ENTER/EXIT sequence. Both of the other 2 masks
>>>> can never remain set across a full idle ENTER/EXIT sequence. And a CPU going
>>>> offline certainly goes through EXIT if it had gone through ENTER, before
>>>> entering stop_machine().
>>>>
>>>> That means, force_mask is the only odd one out here, which can remain set
>>>> when entering stop_machine() for CPU offline. So that's the only mask that
>>>> needs to be cleared separately. The other 2 masks take care of themselves
>>>> automatically. So, we can have a CPU_DYING callback which just clears the
>>>> dying CPU from the force_mask (and does nothing more). That should work, no?
>>>
>>> Yep I think this will work. Find the modified patch below:
>>>
>>> Thanks.
>>>
>>> Regards
>>> Preeti U Murthy
>>>
>>>
>>> tick,broadcast:Clear hotplugged cpu in broadcast masks during CPU_DYING notification
>>>
>>> From: Preeti U Murthy <preeti@xxxxxxxxxxxxxxxxxx>
>>>
>>> Its possible that the tick_broadcast_force_mask contains cpus which are not
>>> in cpu_online_mask when a broadcast tick occurs. This could happen under the
>>> following circumstance assuming CPU1 is among the CPUs waiting for broadcast.
>>>
>>> CPU0					CPU1
>>>
>>> Run CPU_DOWN_PREPARE notifiers
>>>
>>> Start stop_machine			Gets woken up by IPI to run
>>> 					stop_machine, sets itself in
>>> 					tick_broadcast_force_mask if the
>>> 					time of broadcast interrupt is around
>>> 					the same time as this IPI.
>>>
>>> 					Start stop_machine
>>> 					  set_cpu_online(cpu1, false)
>>> End stop_machine			End stop_machine
>>>
>>> Broadcast interrupt
>>>   Finds that cpu1 in
>>>   tick_broadcast_force_mask is offline
>>>   and triggers the WARN_ON in
>>>   tick_handle_oneshot_broadcast()
>>>
>>> Clears all broadcast masks
>>> in CPU_DEAD stage.
>>>
>>> While the hotplugged cpu clears its bit in the tick_broadcast_oneshot_mask
>>> and tick_broadcast_pending mask during BROADCAST_EXIT, it *sets* its bit
>>> in the tick_broadcast_force_mask if the broadcast interrupt is found to be
>>> around the same time as the present time. Today we clear all the broadcast
>>> masks and shutdown tick devices in the CPU_DEAD stage. But as shown above
>>> the broadcast interrupt could occur before this stage is reached and the
>>> WARN_ON() gets triggered when it is found that the tick_broadcast_force_mask
>>> contains an offline cpu.
>>>
>>> This WARN_ON was added to capture scenarios where the broadcast mask, be it
>>> oneshot/pending/force_mask contain offline cpus whose tick devices have been
>>> removed. But here is a case where we trigger the WARN_ON() when the tick
>>> device of the hotplugged cpu is still around but we are delaying the clearing
>>> of the broadcast masks. This has not been a problem for
>>> tick_broadcastoneshot_mask and tick_broadcast_pending_mask since they get
>>> cleared on exit from broadcast.
>>>    But since the force_mask gets set at the same time on certain occasions
>>> it is necessary to move the clearing of masks to a stage during cpu hotplug
>>> before the hotplugged cpu clears itself in the online_mask.
>>>
>>
>> That last sentence is not entirely accurate. During stop-machine in the CPU
>> offline path, the CPU removes itself from the cpu_online_mask at the very
>> beginning, in the __cpu_disable() call. Only after that the CPU_DYING notifiers
>> are invoked. But the advantage of clearing the CPU from the force_mask at
>> the CPU_DYING stage is that no other CPU is "noticing" this event, since
>> everybody is busy spinning in stop-machine. So, by the time stop-machine
>> completes and the CPU is officially offline, it would have "magically" cleared
>> itself from the force_mask as well, making things look very consistent for
>> the rest of the CPUs (i.e., an offline CPU will never remain set in the
>> force_mask).
> 
> Hmm right. Besides this,like we discussed offline, this WARN_ON() is
> unlikely to be hit in the scenario described in the change log because
> the force_mask will be set only when the broadcast interrupt is expected
> to be delivered anytime now. There is time before the hotplugged CPU
> clears its bit in the cpu_online_mask for the broadcast interrupt to
> arrive and see that the force_mask is still a subset of the cpu_online_mask.
> 
> But I still think that this patch would be required for the reason
> mentioned in the changelog in the last paragraph.
>>
>>> Hence move the clearing of broadcast masks to the CPU_DYING notification stage
>>> so that they remain consistent with the cpu_online_mask at the time of
>>> broadcast delivery at all times.
> 
>    ^^^ this is the reason why we will need to move the clearing of mask
> from CPU_DEAD to CPU_DYING stage so as to avoid hitting the WARN_ON()
> unnecessarily in some valid scenario in the future.
> 
> I can send out a V2 patch with the modified changelog with just the last
> paragraph. What do you think?
> 
> Thomas, do you think this patch will make sense for the reason mentioned
> above?
> 
> Thanks
> 
> Regards
> Preeti U Murthy
>>>
>>
>> This last paragraph sums it up perfectly.
>>
>>> Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
>>> Signed-off-by: Preeti U Murthy <preeti@xxxxxxxxxxxxxxxxxx>
>>
>> You might want to alter the changelog a bit as mentioned above. Other than
>> that, everything looks fine to me. (But see one minor whitespace nitpick
>> below).
>>
>> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
>>
>>> ---
>>>  kernel/time/clockevents.c    |    1 +
>>>  kernel/time/tick-broadcast.c |   20 +++++++++++++++-----
>>>  kernel/time/tick-internal.h  |    3 +++
>>>  3 files changed, 19 insertions(+), 5 deletions(-)
>>>
>> [...]
>>> @@ -912,11 +925,8 @@ void tick_shutdown_broadcast_oneshot(unsigned int *cpup)
>>>  	cpumask_clear_cpu(cpu, tick_broadcast_pending_mask);
>>>  	cpumask_clear_cpu(cpu, tick_broadcast_force_mask);
>>>
>>> -	broadcast_move_bc(cpu);
>>> -
>>>  	raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
>>>  }
>>> -
>>
>> I guess you removed that newline by mistake. Please add it back, it improves
>> readability.
>>
>> Regards,
>> Srivatsa S. Bhat
>>
>>>  /*
>>>   * Check, whether the broadcast device is in one shot mode
>>>   */
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/