Re: [PATCHv3 1/3] pwm: make the PWM_POLARITY flag in DTB optional

[Thierry Reding]

On Wed, Apr 09, 2014 at 08:12:09AM +0200, Sascha Hauer wrote:
> On Tue, Apr 08, 2014 at 01:43:22PM -0700, Tim Kryger wrote:
> > On Mon, Apr 7, 2014 at 10:02 PM, Lothar WaÃmann <LW@xxxxxxxxxxxxxxxxxxx> wrote:
> > > Thierry Reding wrote:
> > 
> > >> No. You cannot emulate polarity inversion in software.
> > >>
> > > Why not?
> > >
> > > duty_ns = period_ns - duty_ns;
> > 
> > Since I made the same mistake, I will pass along the pointer Thierry gave me.
> > 
> > In include/linux/pwm.h the second difference for an inverted signal is
> > described.
> > 
> > /**
> >  * enum pwm_polarity - polarity of a PWM signal
> >  * @PWM_POLARITY_NORMAL: a high signal for the duration of the duty-
> >  * cycle, followed by a low signal for the remainder of the pulse
> >  * period
> >  * @PWM_POLARITY_INVERSED: a low signal for the duration of the duty-
> >  * cycle, followed by a high signal for the remainder of the pulse
> >  * period
> >  */
> > enum pwm_polarity {
> > PWM_POLARITY_NORMAL,
> > PWM_POLARITY_INVERSED,
> > };
> > 
> > Of course, I suspect not all PWM hardware respects this definition of
> > inverted output.
> > 
> > Either way, hacking the duty in software certainly would get the
> > high/low order wrong.
> 
> This only relevant if you have some reference signal the PWM must be
> relative to, for example if you combine multiple PWMs for motor control.
> For PWMs used for backlight or beepers a signal inversion in software is
> perfectly fine. And I also think that it makes sense to put it once into
> the framework instead of bothering all consumer drivers with the
> inversion.

The PWM framework itself doesn't have enough knowledge about what a PWM
is being used for. Therefore it cannot determine whether emulating
polarity inversion by reversing the duty cycle will be appropriate.

Putting such functionality into the core will prevent PWM channels from
being used for cases where the signal polarity does matter.

Thierry

Attachment: pgpRPOmiNyllp.pgp
Description: PGP signature