[PATCH RFC v5 2/2] clk: Add handling of clk parent and rate assigned from DT
From: Sylwester Nawrocki
Date: Wed Apr 09 2014 - 07:27:30 EST
This patch adds a helper function to configure clock parents and
rates as specified in clock-parents, clock-rates DT properties
for a consumer device and a call to it before driver is bound to
a device.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
Changes since v4:
- added note explaining how to skip setting parent and rate
of a clock,
- moved of_clk_dev_init() calls to the platform bus,
- added missing call to of_node_put(),
- dropped debug traces.
Changes since v3:
- added detailed description of the assigned-clocks subnode,
- added missing 'static inline' to the function stub definition,
- clk-conf.c is now excluded when CONFIG_OF is not set,
- s/of_clk_device_setup/of_clk_device_init.
Changes since v2:
- edited in clock-bindings.txt, added note about 'assigned-clocks'
subnode which may be used to specify "global" clocks configuration
at a clock provider node,
- moved of_clk_device_setup() function declaration from clk-provider.h
to clk-conf.h so required function stubs are available when
CONFIG_COMMON_CLK is not enabled,
Changes since v1:
- the helper function to parse and set assigned clock parents and
rates made public so it is available to clock providers to call
directly;
- dropped the platform bus notification and call of_clk_device_setup()
is is now called from the driver core, rather than from the
notification callback;
- s/of_clk_get_list_entry/of_clk_get_by_property.
---
.../devicetree/bindings/clock/clock-bindings.txt | 44 ++++++++++
drivers/base/platform.c | 5 ++
drivers/clk/Makefile | 3 +
drivers/clk/clk-conf.c | 85 ++++++++++++++++++++
drivers/clk/clk.c | 12 ++-
include/linux/clk/clk-conf.h | 19 +++++
6 files changed, 167 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/clk-conf.c
create mode 100644 include/linux/clk/clk-conf.h
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 700e7aa..93513fc 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -132,3 +132,47 @@ clock signal, and a UART.
("pll" and "pll-switched").
* The UART has its baud clock connected the external oscillator and its
register clock connected to the PLL clock (the "pll-switched" signal)
+
+==Assigned clock parents and rates==
+
+Some platforms require static initial configuration of parts of the clocks
+controller. Such a configuration can be specified in a clock consumer node
+through clock-parents and clock-rates DT properties. The former should
+contain a list of parent clocks in form of phandle and clock specifier pairs,
+the latter the list of assigned clock frequency values (one cell each).
+To skip setting parent or rate of a clock its corresponding entry should be
+set to 0, or can be omitted if it is not followed by any non-zero entry.
+
+ uart@a000 {
+ compatible = "fsl,imx-uart";
+ reg = <0xa000 0x1000>;
+ ...
+ clocks = <&clkcon 0>, <&clkcon 3>;
+ clock-names = "baud", "mux";
+
+ clock-parents = <0>, <&pll 1>;
+ clock-rates = <460800>;
+ };
+
+In this example the pll is set as parent of "mux" clock and frequency of "baud"
+clock is specified as 460800 Hz.
+
+Configuring a clock's parent and rate through the device node that uses
+the clock can be done only for clocks that have a single user. Specifying
+conflicting parent or rate configuration in multiple consumer nodes for
+a shared clock is forbidden.
+
+Configuration of common clocks, which affect multiple consumer devices
+can be specified in a dedicated 'assigned-clocks' subnode of a clock
+provider node, e.g.:
+
+ clkcon {
+ ...
+ #clock-cells = <1>;
+
+ assigned-clocks {
+ clocks = <&clkcon 16>, <&clkcon 17>;
+ clock-parents = <0>, <&clkcon 1>;
+ clock-rates = <200000>;
+ };
+ };
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index e714709..4b95322 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -22,6 +22,7 @@
#include <linux/pm_runtime.h>
#include <linux/idr.h>
#include <linux/acpi.h>
+#include <linux/clk/clk-conf.h>
#include "base.h"
#include "power/power.h"
@@ -481,6 +482,10 @@ static int platform_drv_probe(struct device *_dev)
struct platform_device *dev = to_platform_device(_dev);
int ret;
+ ret = of_clk_dev_init(_dev->of_node);
+ if (ret < 0)
+ return ret;
+
acpi_dev_pm_attach(_dev, true);
ret = drv->probe(dev);
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 5f8a287..45598f7 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
obj-$(CONFIG_COMMON_CLK) += clk-gate.o
obj-$(CONFIG_COMMON_CLK) += clk-mux.o
obj-$(CONFIG_COMMON_CLK) += clk-composite.o
+ifeq ($(CONFIG_OF), y)
+obj-$(CONFIG_COMMON_CLK) += clk-conf.o
+endif
# hardware specific clock types
# please keep this section sorted lexicographically by file/directory path name
diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
new file mode 100644
index 0000000..c0d4096
--- /dev/null
+++ b/drivers/clk/clk-conf.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/printk.h>
+
+/**
+ * of_clk_dev_init() - parse and set clk configuration assigned to a device
+ * @node: device node to apply the configuration for
+ *
+ * This function parses 'clock-parents' and 'clock-rates' properties and sets
+ * any specified clock parents and rates.
+ */
+int of_clk_dev_init(struct device_node *node)
+{
+ struct property *prop;
+ const __be32 *cur;
+ int rc, index, num_parents;
+ struct clk *clk, *pclk;
+ u32 rate;
+
+ if (!node)
+ return 0;
+
+ num_parents = of_count_phandle_with_args(node, "clock-parents",
+ "#clock-cells");
+ if (num_parents == -EINVAL)
+ pr_err("clk: invalid value of clock-parents property at %s\n",
+ node->full_name);
+
+ for (index = 0; index < num_parents; index++) {
+ pclk = of_clk_get_by_property(node, "clock-parents", index);
+ if (IS_ERR(pclk)) {
+ /* skip empty (null) phandles */
+ if (PTR_ERR(pclk) == -ENOENT)
+ continue;
+
+ pr_warn("clk: couldn't get parent clock %d for %s\n",
+ index, node->full_name);
+
+ return PTR_ERR(pclk);
+ }
+
+ clk = of_clk_get(node, index);
+ if (IS_ERR(clk)) {
+ pr_warn("clk: couldn't get clock %d for %s\n",
+ index, node->full_name);
+ return PTR_ERR(clk);
+ }
+
+ rc = clk_set_parent(clk, pclk);
+ if (rc < 0)
+ pr_err("clk: failed to reparent %s to %s: %d\n",
+ __clk_get_name(clk), __clk_get_name(pclk), rc);
+ }
+
+ index = 0;
+ of_property_for_each_u32(node, "clock-rates", prop, cur, rate) {
+ if (rate) {
+ clk = of_clk_get(node, index);
+ if (IS_ERR(clk)) {
+ pr_warn("clk: couldn't get clock %d for %s\n",
+ index, node->full_name);
+ return PTR_ERR(clk);
+ }
+
+ rc = clk_set_rate(clk, rate);
+ if (rc < 0)
+ pr_err("clk: couldn't set %s clock rate: %d\n",
+ __clk_get_name(clk), rc);
+ }
+ index++;
+ }
+
+ return 0;
+}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index dff0373..0d72a4d 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -10,6 +10,7 @@
*/
#include <linux/clk-private.h>
+#include <linux/clk/clk-conf.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
@@ -2620,7 +2621,17 @@ void __init of_clk_init(const struct of_device_id *matches)
list_for_each_entry_safe(clk_provider, next,
&clk_provider_list, node) {
if (force || parent_ready(clk_provider->np)) {
+
clk_provider->clk_init_cb(clk_provider->np);
+
+ /* Set any assigned clock parents and rates */
+ np = of_get_child_by_name(clk_provider->np,
+ "assigned-clocks");
+ if (np) {
+ of_clk_dev_init(np);
+ of_node_put(np);
+ }
+
list_del(&clk_provider->node);
kfree(clk_provider);
is_init_done = true;
@@ -2635,7 +2646,6 @@ void __init of_clk_init(const struct of_device_id *matches)
*/
if (!is_init_done)
force = true;
-
}
}
#endif
diff --git a/include/linux/clk/clk-conf.h b/include/linux/clk/clk-conf.h
new file mode 100644
index 0000000..afb4228
--- /dev/null
+++ b/include/linux/clk/clk-conf.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct device_node;
+
+#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+int of_clk_dev_init(struct device_node *node);
+#else
+static inline int of_clk_dev_init(struct device_node *node)
+{
+ return 0;
+}
+#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/