RE: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error

[Fujinaka, Todd]

We also need to know what part you're using. "lspci | grep Ethernet" should narrow that down.

Thanks.

Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujinaka@xxxxxxxxx
(503) 712-4565

-----Original Message-----
From: Borislav Petkov [mailto:bp@xxxxxxxxx] 
Sent: Thursday, April 10, 2014 5:00 AM
To: e1000-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx; lkml
Subject: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error

Hi guys,

I started getting those sporadic

[133178.640890] e1000e 0000:00:19.0 eth0: Hardware Error [133179.293148] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133179.394226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133179.397200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [133181.338258] e1000e 0000:00:19.0 eth0: Hardware Error [133182.077209] pci_pm_runtime_suspend(): e1000_runtime_suspend+0x0/0x40 [e1000e] returns -2

messages with 3.14 and I haven't had them before. After this, I do

rmmod e1000e && modprobe e1000e

and I get:

[133221.891555] e1000e 0000:00:19.0 eth0: removed PHC [133228.181552] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133228.181562] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133228.182241] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133228.182332] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133229.009837] e1000e: probe of 0000:00:19.0 failed with error -2
			^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

[133307.107217] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133307.107228] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133307.107814] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133307.107959] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133307.935921] e1000e: probe of 0000:00:19.0 failed with error -2

...

[133841.361905] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133841.361914] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133841.362451] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133841.362520] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133842.192710] e1000e: probe of 0000:00:19.0 failed with error -2

each time I try and eth0 is dead. Only a reboot helps, I've come to find out so far.

Any ideas?

--
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--

------------------------------------------------------------------------------
Put Bad Developers to Shame
Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud.
http://p.sf.net/sfu/13600_Cloudbees
_______________________________________________
E1000-devel mailing list
E1000-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/