[PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11

[Krzysztof Kozlowski]

Change the binding for regulators external control to the same used in
s2mps11 driver to be consistent.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Cc: Tomasz Figa <t.figa@xxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt | 4 ++--
 drivers/regulator/s5m8767.c                                       | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
index d290988ed975..558c80345ef0 100644
--- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -76,7 +76,7 @@ except these properties:
 		1 - on in normal mode
 		2 - low power mode
 		3 - suspend mode
-	- s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
+	- samsung,ext-control-gpios: (optional) GPIO specifier for one
 		GPIO controlling this regulator (enable/disable); This is
 		valid only for buck9.
 
@@ -157,7 +157,7 @@ Example:
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				op_mode = <3>; /* Standby Mode */
-				s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 0>;
 			};
 		};
 	};
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 92f19a005dc3..dbfd98b04a77 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -534,7 +534,7 @@ static void s5m8767_pmic_dt_parse_ext_control_gpio(struct sec_pmic_dev *iodev,
 		struct device_node *reg_np)
 {
 	rdata->ext_control_gpio = of_get_named_gpio(reg_np,
-			"s5m8767,pmic-ext-control-gpios", 0);
+			"samsung,ext-control-gpios", 0);
 	if (!gpio_is_valid(rdata->ext_control_gpio))
 		rdata->ext_control_gpio = 0;
 }
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/