[PATCH v2 RESEND 00/23] scsi: Use pci_enable_msix_range() instead of pci_enable_msix()

[Alexander Gordeev]

Hello,

This series is against 3.15-rc1.

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

There are no major changes in this series since I posted
it last time.

Thanks!

Cc: iss_storagedev@xxxxxx
Cc: intel-linux-scu@xxxxxxxxx
Cc: support@xxxxxxx
Cc: DL-MPTFusionLinux@xxxxxxx
Cc: qla2xxx-upstream@xxxxxxxxxx
Cc: iscsi-driver@xxxxxxxxxx
Cc: pv-drivers@xxxxxxxxxx
Cc: linux-scsi@xxxxxxxxxxxxxxx
Cc: linux-pci@xxxxxxxxxxxxxxx


Alexander Gordeev (23):
  be2iscsi: Use pci_enable_msix_exact() instead of pci_enable_msix()
  bfa: Do not call pci_enable_msix() after it failed once
  bfa: Cleanup bfad_setup_intr() function
  bfa: Use pci_enable_msix_exact() instead of pci_enable_msix()
  csiostor: Remove superfluous call to pci_disable_msix()
  csiostor: Use pci_enable_msix_range() instead of pci_enable_msix()
  fnic: Use pci_enable_msix_exact() instead of pci_enable_msix()
  isci: Use pci_enable_msix_exact() instead of pci_enable_msix()
  hpsa: Fallback to MSI rather than to INTx if MSI-X failed
  hpsa: Use pci_enable_msix_range() instead of pci_enable_msix()
  lpfc: Remove superfluous call to pci_disable_msix()
  lpfc: Use pci_enable_msix_range() instead of pci_enable_msix()
  megaraid: Fail resume if MSI-X re-initialization failed
  megaraid: Use pci_enable_msix_range() instead of pci_enable_msix()
  mpt2sas: Use pci_enable_msix_exact() instead of pci_enable_msix()
  mpt3sas: Use pci_enable_msix_exact() instead of pci_enable_msix()
  pm8001: Fix invalid return when request_irq() failed
  pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()
  pmcraid: Get rid of a redundant assignment
  pmcraid: Use pci_enable_msix_range() instead of pci_enable_msix()
  qla2xxx: Use pci_enable_msix_range() instead of pci_enable_msix()
  qla4xxx: Use pci_enable_msix_exact() instead of pci_enable_msix()
  vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix()

 drivers/scsi/be2iscsi/be_main.c           |    6 +--
 drivers/scsi/bfa/bfad.c                   |   62 ++++++++++++-----------------
 drivers/scsi/csiostor/csio_hw.h           |    2 +-
 drivers/scsi/csiostor/csio_isr.c          |   24 ++++-------
 drivers/scsi/fnic/fnic_isr.c              |    4 +-
 drivers/scsi/hpsa.c                       |   30 ++++++--------
 drivers/scsi/isci/init.c                  |    2 +-
 drivers/scsi/lpfc/lpfc_init.c             |   47 +++++++++++-----------
 drivers/scsi/megaraid/megaraid_sas_base.c |   24 +++++------
 drivers/scsi/mpt2sas/mpt2sas_base.c       |    6 +-
 drivers/scsi/mpt3sas/mpt3sas_base.c       |    4 +-
 drivers/scsi/pm8001/pm8001_init.c         |   44 +++++++++++----------
 drivers/scsi/pmcraid.c                    |   14 +------
 drivers/scsi/qla2xxx/qla_isr.c            |   27 +++++-------
 drivers/scsi/qla4xxx/ql4_nx.c             |    2 +-
 drivers/scsi/vmw_pvscsi.c                 |    2 +-
 16 files changed, 129 insertions(+), 171 deletions(-)

-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/