Re: [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver

[Ben Dooks]

On 12/04/14 04:06, Iyappan Subramanian wrote:
> This patch adds documentation for APM X-Gene SoC ethernet DTS binding.
>
> Signed-off-by: Iyappan Subramanian <isubramanian@xxxxxxx>
> Signed-off-by: Ravi Patel <rapatel@xxxxxxx>
> Signed-off-by: Keyur Chudgar <kchudgar@xxxxxxx>
> ---
>   .../devicetree/bindings/net/apm-xgene-enet.txt     |   46 ++++++++++++++++++++
>   1 file changed, 46 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt
>
> diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
> new file mode 100644
> index 0000000..0c983e8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
> @@ -0,0 +1,46 @@
> +APM X-Gene SoC Ethernet nodes
> +
> +Ethernet nodes are defined to describe on-chip ethernet interfaces in
> +APM X-Gene SoC.
> +
> +Required properties:
> +- compatible		: Should be "apm,xgene-enet"
> +- reg			: First resource is the ethernet base register set
> +			  Second resource is the ring base register set
> +			  Third resource is the ring command register set
> +- interrupts		: Ethernet main interrupt
> +- clocks		: Reference to the clock entry.
> +- local-mac-address	: Ethernet MAC address.
> +- phy-addr		: Ethernet MII phy address.
> +- phy-mode		: Ethernet MII mode.
> +
> +Optional properties:
> +- status		: Should be "ok" or "disabled" for enabled/disabled.
> +			  Default is "ok".
> +
> +Example:
> +	menetclk: menetclk {
> +		compatible = "apm,xgene-device-clock";
> +		clock-output-names = "menetclk";
> +		status = "ok";
> +	};
> +
> +	menet: ethernet@17020000 {
> +		compatible = "apm,xgene-enet";
> +		status = "disabled";
> +		reg = <0x0 0x17020000 0x0 0xd100>,
> +		      <0x0 0X17030000 0x0 0X400>,
> +		      <0x0 0X10000000 0x0 0X200>;
> +		interrupts = <0x0 0x3c 0x4>;
> +		clocks = <&menetclk 0>;
> +		local-mac-address = [00 01 73 00 00 01];
> +		phy-addr = <3>;
> +		phy-mode = "rgmii";
> +	};

That doesn't look correct for a phy binding.


--
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/