[PATCH 09/20] cpufreq: longhaul: Use cpufreq_for_each_entry macro for iteration

[Stratos Karafotis]

The cpufreq core supports the cpufreq_for_each_entry macro helper
for iteration over the cpufreq_frequency_table, so use it.

It should have no functional changes.

Signed-off-by: Stratos Karafotis <stratosk@xxxxxxxxxxxx>
---
 drivers/cpufreq/longhaul.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index d00e5d1..6de99c4 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -528,6 +528,7 @@ static int longhaul_get_ranges(void)
 
 static void longhaul_setup_voltagescaling(void)
 {
+	struct cpufreq_frequency_table *freq;
 	union msr_longhaul longhaul;
 	struct mV_pos minvid, maxvid, vid;
 	unsigned int j, speed, pos, kHz_step, numvscales;
@@ -606,18 +607,16 @@ static void longhaul_setup_voltagescaling(void)
 	/* Calculate kHz for one voltage step */
 	kHz_step = (highest_speed - min_vid_speed) / numvscales;
 
-	j = 0;
-	while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
-		speed = longhaul_table[j].frequency;
+	cpufreq_for_each_entry(freq, longhaul_table) {
+		speed = freq->frequency;
 		if (speed > min_vid_speed)
 			pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
 		else
 			pos = minvid.pos;
-		longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8;
+		freq->driver_data |= mV_vrm_table[pos] << 8;
 		vid = vrm_mV_table[mV_vrm_table[pos]];
-		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
-				speed, j, vid.mV);
-		j++;
+		printk(KERN_INFO PFX "f: %d kHz, index: %lu, vid: %d mV\n",
+				speed, freq - longhaul_table, vid.mV);
 	}
 
 	can_scale_voltage = 1;
-- 
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/