Re: [Patch v5 3/6] IIO: core: Modify scan element type

[Peter Meerwald]

> The current scan element type uses the following format:
>   [be|le]:[s|u]bits/storagebits[>>shift].
> To specify multiple elements in this type, added a repeat value.
> So new format is:
>   [be|le]:[s|u]bits/storagebits{X[repeat]}[>>shift].
> Here X is specifying how may times, real/storage bits are repeating.
> 
> When X is value is 0 or 1, then repeat value is not used in the format,
> and it will be same as existing format.

minor comments inline

> ---
>  drivers/iio/industrialio-buffer.c | 41 +++++++++++++++++++++++++++++++++------
>  include/linux/iio/iio.h           |  9 +++++++++
>  2 files changed, 44 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
> index e108f2a..aa90c68 100644
> --- a/drivers/iio/industrialio-buffer.c
> +++ b/drivers/iio/industrialio-buffer.c
> @@ -150,7 +150,16 @@ static ssize_t iio_show_fixed_type(struct device *dev,
>  		type = IIO_BE;
>  #endif
>  	}
> -	return sprintf(buf, "%s:%c%d/%d>>%u\n",
> +	if (this_attr->c->scan_type.repeat > 1)
> +		return sprintf(buf, "%s:%c%d/%d{%d[repeat]}>>%u\n",
> +		       iio_endian_prefix[type],
> +		       this_attr->c->scan_type.sign,
> +		       this_attr->c->scan_type.realbits,
> +		       this_attr->c->scan_type.storagebits,
> +		       this_attr->c->scan_type.repeat,
> +		       this_attr->c->scan_type.shift);
> +		else
> +			return sprintf(buf, "%s:%c%d/%d>>%u\n",
>  		       iio_endian_prefix[type],
>  		       this_attr->c->scan_type.sign,
>  		       this_attr->c->scan_type.realbits,
> @@ -474,14 +483,22 @@ static int iio_compute_scan_bytes(struct iio_dev *indio_dev,
>  	for_each_set_bit(i, mask,
>  			 indio_dev->masklength) {
>  		ch = iio_find_channel_from_si(indio_dev, i);
> -		length = ch->scan_type.storagebits / 8;
> +		if (ch->scan_type.repeat > 1)
> +			length = ch->scan_type.storagebits / 8 *
> +				ch->scan_type.repeat;

so storagebits should be a multiple of 8 and != 0;
we cannot have repeated groups of say 4 bits

> +		else
> +			length = ch->scan_type.storagebits / 8;
>  		bytes = ALIGN(bytes, length);
>  		bytes += length;
>  	}
>  	if (timestamp) {
>  		ch = iio_find_channel_from_si(indio_dev,
>  					      indio_dev->scan_index_timestamp);
> -		length = ch->scan_type.storagebits / 8;
> +		if (ch->scan_type.repeat > 1)
> +			length = ch->scan_type.storagebits / 8 *
> +				ch->scan_type.repeat;
> +		else
> +			length = ch->scan_type.storagebits / 8;
>  		bytes = ALIGN(bytes, length);
>  		bytes += length;
>  	}
> @@ -957,7 +974,11 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev,
>  					       indio_dev->masklength,
>  					       in_ind + 1);
>  			ch = iio_find_channel_from_si(indio_dev, in_ind);
> -			length = ch->scan_type.storagebits/8;
> +			if (ch->scan_type.repeat > 1)
> +				length = ch->scan_type.storagebits / 8 *
> +					ch->scan_type.repeat;
> +			else
> +				length = ch->scan_type.storagebits / 8;
>  			/* Make sure we are aligned */
>  			in_loc += length;
>  			if (in_loc % length)
> @@ -969,7 +990,11 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev,
>  			goto error_clear_mux_table;
>  		}
>  		ch = iio_find_channel_from_si(indio_dev, in_ind);
> -		length = ch->scan_type.storagebits/8;
> +		if (ch->scan_type.repeat > 1)
> +			length = ch->scan_type.storagebits / 8 *
> +				ch->scan_type.repeat;
> +		else
> +			length = ch->scan_type.storagebits / 8;
>  		if (out_loc % length)
>  			out_loc += length - out_loc % length;
>  		if (in_loc % length)
> @@ -990,7 +1015,11 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev,
>  		}
>  		ch = iio_find_channel_from_si(indio_dev,
>  			indio_dev->scan_index_timestamp);
> -		length = ch->scan_type.storagebits/8;
> +		if (ch->scan_type.repeat > 1)
> +			length = ch->scan_type.storagebits / 8 *
> +				ch->scan_type.repeat;
> +		else
> +			length = ch->scan_type.storagebits / 8;
>  		if (out_loc % length)
>  			out_loc += length - out_loc % length;
>  		if (in_loc % length)
> diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
> index 5629c92..324ae00 100644
> --- a/include/linux/iio/iio.h
> +++ b/include/linux/iio/iio.h
> @@ -177,6 +177,14 @@ struct iio_event_spec {
>   *			shift:		Shift right by this before masking out
>   *					realbits.
>   *			endianness:	little or big endian
> + *			repeat:		No. of times real/storage bits repeats.

I'd rather spell out 'Number'

> + *					By default, when repeat is set to 0
> + *					repeat value is treated as 1. When
> + *					repeat value is 0 or 1, then there is
> + *					no change in existing scan element

'no change in existing scan element' -- this makes sense only now

maybe: 'When the repeat element is more than 1, then the type element in 
sysfs will show a repeat value. Otherwise, the number of repetitions is
omitted.'

> + *					type, in sysfs. When set to more than

no comma before 'in sysfs.'


> + *					1, then the type element in sysfs will
> + *					show repeat value.
>   * @info_mask_separate: What information is to be exported that is specific to
>   *			this channel.
>   * @info_mask_shared_by_type: What information is to be exported that is shared
> @@ -219,6 +227,7 @@ struct iio_chan_spec {
>  		u8	realbits;
>  		u8	storagebits;
>  		u8	shift;
> +		u8	repeat;
>  		enum iio_endian endianness;
>  	} scan_type;
>  	long			info_mask_separate;
> 

-- 

Peter Meerwald
+43-664-2444418 (mobile)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/