Re: Missing USB XHCI and EHCI reset for kexec

[stefani]

Zitat von Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxxxxxx>:

> On Mon, Apr 14, 2014 at 05:44:58PM +0200, stefani@xxxxxxxxxxx wrote:
> > Zitat von Benjamin Herrenschmidt <benh@xxxxxxxxxxx>:
> >
> > >I don't know about EHCI specifically but this is a known issue with
> > >XHCI, I observe similar issues on other powerpc platforms (servers)
> > >and this isn't architecture specific (looks more like actualy xhc
> > >implementation specific).
> > >
> > >Thadeu Cascardo (on CC) has been the one investigating that on our side,
> > >he might have more to add including patches.
> > >
> >
> > I have now a kernel 3.14 dmesg log of the problem. After a kexec the
> > kexeced 3.14 kernel shows:
> >
> > [    1.170029] xhci_hcd 0001:03:00.0: xHCI Host Controller
> > [    1.175306] xhci_hcd 0001:03:00.0: new USB bus registered,
> > assigned bus number 1
> > [    1.212561] xhci_hcd 0001:03:00.0: Host not halted after 16000
> > microseconds.
> > [    1.219621] xhci_hcd 0001:03:00.0: can't setup: -110
> > [    1.224597] xhci_hcd 0001:03:00.0: USB bus 1 deregistered
> > [    1.230021] xhci_hcd 0001:03:00.0: init 0001:03:00.0 fail, -110
> > [    1.235955] xhci_hcd: probe of 0001:03:00.0 failed with error -110
>
> What is your controller vendor and device IDs? Is that a TI chip?

Yes it is a TI chip, vendor ID 104c and product ID 8241.

> Can you check if the patch I sent a month ago fixes it? [1] There's the
> whole story there. In fact, you will also need something like the patch
> below. Can you apply only the first one, verify, and, then, the other
> one as well, and report what worked for you?
>
> [1] http://marc.info/?l=linux-usb&m=139483181809062&w=2

I tried the attach patch and it did not help. This is what i expected  
because this is a fix in the shutdown path, which will never called  
when doing a forced kexec.

I have a running a 3.10.23 kernel. This kernel do a kexec for a kernel  
3.14. Since the kernel 3.10.23 did not performe a clean shutdown, the  
state of the XHCI Controller is undefined. So when kernel 3.14 will  
probe XHCI it will find a XHCI controller which was not performed a  
reset.

So i think it is necessary to reset the XHCI controller and all  
devices on this bus. This is what i do with a "echo 1  
>/sys/bus/pci/drivers/xhci_hcd/0001:03:00.0/reset" before the kexec.

- Stefani


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/