Re: [PATCH V5.1] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers

[One Thousand Gnomes]

> +static int convert_val2rxtrig(struct uart_8250_port *up, unsigned char val)
> +{
> +	const struct serial8250_config *conf_type = &uart_config[up->port.type];
> +	int i;
> +
> +	if (!conf_type->rx_trig_byte[FCR_RX_TRIG_BITS(UART_FCR_R_TRIG_00)]) {
> +		pr_info("Not support RX-trigger setting for this serial %s\n",
> +			conf_type->name);
> +		return -EOPNOTSUPP;

We don't want the pr_info here - otherwise users can flood the logs. The
err code is sufficient.

> +	for (i = 1; i < FCR_RX_TRIG_MAX_STATE; i++) {
> +		if (val < conf_type->rx_trig_byte[i])
> +			/* Use the nearest lower value */
> +			return (--i) << FCR_RX_TRIG_OFFSET;

Odd case here - your 16654 entry has a minimum of 8 so if I pass 1 then
it'll return -1 ? I guess for that case the best we can do is to set 8.

Other trivial thing to tweak - you have "uaser" in spot instead of "user".

With those two fixed it looks good to me.

Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/