Re: [PATCH v2] x86: hpet: Don't default CONFIG_HPET_TIMER to be y for X86_64

[Ingo Molnar]

* Feng Tang <feng.tang@xxxxxxxxx> wrote:

> On Tue, Apr 15, 2014 at 11:00:25AM +0200, Ingo Molnar wrote:
> > 
> > * Feng Tang <feng.tang@xxxxxxxxx> wrote:
> > 
> > > Hi Ingo,
> > > 
> > > On Fri, Mar 28, 2014 at 09:11:17AM +0100, Ingo Molnar wrote:
> > > > 
> > > > * Clemens Ladisch <clemens@xxxxxxxxxx> wrote:
> > > > 
> > > > > Feng Tang wrote:
> > > > > > On Fri, Mar 28, 2014 at 08:17:16AM +0100, Ingo Molnar wrote:
> > > > > >> * Feng Tang <feng.tang@xxxxxxxxx> wrote:
> > > > > >>  - or the kernel should have a quirk to reliably disable it. Why
> > > > > >>    should we crash or misbehave if a driver is built into the
> > > > > >>    kernel?
> > > > > >
> > > > > > I thought about this before, HPET doesn't have PCI ID like stuff,
> > > > > 
> > > > > HPET does have the PCI vendor ID in the first register.
> > > > > 
> > > > > > only thing I can think of to identify them may be the CPU family/ID.
> > > > > 
> > > > > The HPET is implemented by some actual chip, and that chip also has lots
> > > > > of PCI devices.  (In the case of a SoC, the CPU ID would work, too).
> > > > 
> > > > Correct. See arch/x86/kernel/hpet.c, which has a large number of HPET 
> > > > quirks keyed off chipset PCI IDs:
> > > > 
> > > >   DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
> > > >                            ich_force_enable_hpet);
> > > >   DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
> > > >                            ich_force_enable_hpet);
> > > >   DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
> > > >                            ich_force_enable_hpet);
> > > >   [...]
> > > 
> > > I just gave it another thought, that the HPET on our platform 
> > > currently do have some problem to be used as clocksource/clockevent, 
> > > but it may get fixed in future version (by Silicon or BIOS).
> > > 
> > > If I add quirk to block it now, I may revert this code in future 
> > > when it get fixed, same problem applis for the future generation of 
> > > platform.
> > 
> > If the hardware or BIOS gets fixed then that will be visible in the 
> > revision level of the hardware, right?
> 
> AFAIK, if it is fixed in a new silicon version, we should be able to 
> detect it by the "stepping", but the PCI DEV ID is not likely to 
> change.
> 
> If it is fixed by BIOS or PUNIT FW, then we may go through the DMI 
> info to check the BIOS version, One problem is there is some 
> Baytrail tablet platforms that doesn't provide DMI info as its FW is 
> not UEFI/Legacy BIOS compatible version.

So just turn it off for the current hardware, via PCI ID. When you get 
a fix, you can turn it back on again by refining the quirk check, for 
that specific hardware.

Thanks,

	Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/