Re: [PATCH 7/7] ARM: sunxi: dt: add PRCM clk and reset controller subdevices

[Chen-Yu Tsai]

Hi,

On Mon, Apr 28, 2014 at 10:58 PM, Boris BREZILLON
<boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote:
> Add DT definitions for PRCM (Power/Reset/Clock Management) clock and reset
> controller subdevices.
>
> Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/sun6i-a31.dtsi | 49 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
> index ec3253a..83a1634 100644
> --- a/arch/arm/boot/dts/sun6i-a31.dtsi
> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi
> @@ -501,6 +501,55 @@
>                 prcm@01f01c00 {

Seems the address here was wrong to start with.

>                         compatible = "allwinner,sun6i-a31-prcm";
>                         reg = <0x01f01400 0x200>;
> +
> +                       ar100_mux: ar100_mux {

Might we use clk@01f01XXX for the names of the clock nodes?

> +                               compatible = "allwinner,sun6i-a31-ar100-mux-clk";
> +                               #clock-cells = <0>;
> +                               clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
> +                       };
> +
> +                       ar100: ar100 {
> +                               compatible = "allwinner,sun6i-a31-ar100-clk";
> +                               #clock-cells = <0>;
> +                               clocks = <&ar100_mux>;
> +                       };
> +
> +                       ar100_div: ar100_div {
> +                               compatible = "allwinner,sun6i-a31-ar100-div-clk";
> +                               #clock-cells = <0>;
> +                               clocks = <&ar100>;
> +                       };
> +
> +                       ahb0: ahb0 {
> +                               compatible = "fixed-factor-clock";
> +                               #clock-cells = <0>;
> +                               clock-div = <1>;
> +                               clock-mult = <1>;
> +                               clocks = <&ar100_div>;
> +                               clock-output-names = "ahb0";
> +                       };
> +
> +                       apb0: apb0 {
> +                               compatible = "allwinner,sun6i-a31-apb0-clk";
> +                               #clock-cells = <0>;
> +                               clocks = <&ahb0>;
> +                               clock-output-names = "apb0";
> +                       };
> +
> +                       apb0_gates: apb0_gates {
> +                               compatible = "allwinner,sun6i-a31-apb0-gates-clk";
> +                               #clock-cells = <1>;
> +                               clocks = <&apb0>;
> +                               clock-output-names = "apb0_pio", "apb0_ir",
> +                                               "apb0_timer01", "apb0_p2wi",
> +                                               "apb0_uart", "apb0_1wire",
> +                                               "apb0_i2c";
> +                       };
> +
> +                       apb0_rst: apb0_rst {

Also use reset@01f01XXX here?

> +                               compatible = "allwinner,sun6i-a31-clock-reset";
> +                               #reset-cells = <1>;
> +                       };
>                 };
>         };
>  };

Thanks!

ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/