Re: [PATCH v1.0 2/16] arcmsr: Support MSI-X interrupt

[ching]

Thanks for Dan's advice.
I will revise the patch code.
Next upload will be PATCH v1.1 16 patches.

On Fri, 2014-05-02 at 11:31 +0300, Dan Carpenter wrote:
> On Wed, Apr 30, 2014 at 05:50:12PM +0800, ching wrote:
> > From: Ching<ching2048@xxxxxxxxxxxx>
> > 
> > Adding code for supporting MSI-X interrupt
> > 
> > Signed-off-by: Ching<ching2048@xxxxxxxxxxxx>
> > ---
> 
> These patches seem to be broken up nicely into patches which do one
> thing per patch and they are much easier to review now.  Thanks!
> 
> > +static int arcmsr_request_irq(struct pci_dev *pdev, struct AdapterControlBlock *acb)
> > +{
> > +	int	i, j, r;
> > +	struct msix_entry entries[ARCMST_NUM_MSIX_VECTORS];
> > +
> 
> This function is more confusing than necessary and it goes over the 80
> character limit.  One hint for improving it is that you should always
> test for failure and handle the failure condition first before moving
> on.  In other words reverse these tests.
> 
> Also let's rename LEG_INT to legacy_int: and MSI_INT to msi_int:.
> 
> > +	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
> 
> 	if (!pci_find_capability(pdev, PCI_CAP_ID_MSIX))
> 		goto msi_int;
> 
> We can pull the following code in one indent level.
> 
> > +		for (i = 0; i < ARCMST_NUM_MSIX_VECTORS; i++) {
> > +			entries[i].entry = i;
> > +		}
> 
> Remove unneeded curly braces.
> 
> > +		r = pci_enable_msix(pdev, entries, ARCMST_NUM_MSIX_VECTORS);
> 
> 		if (r < 0)
> 			goto msi_int;
> 
> > +		if (r == 0) {
> > +			for (i = 0; i < ARCMST_NUM_MSIX_VECTORS; i++) {
> > +				if (request_irq(entries[i].vector,
> > +					arcmsr_do_interrupt, 0, "arcmsr", acb)) {
> > +					pr_warn("arcmsr%d: request_irq =%d failed!\n",
> > +						acb->host->host_no, pdev->irq);
> > +					for (j = 0 ; j < i ; j++)
> > +						free_irq(entries[i].vector, acb);
> > +					pci_disable_msix(pdev);
> > +					goto MSI_INT;
> > +				}
> > +				acb->entries[i] = entries[i];
> > +			}
> > +			acb->acb_flags |= ACB_F_MSIX_ENABLED;
> > +			pr_warn("arcmsr%d: msi-x enabled\n", acb->host->host_no);
> 
> This should be pr_info().  pr_warn() will probably trigger a popup in
> gnome.
> 			return ARC_SUCCESS;
> 
> Returning right away is easier to understand than a return at the end
> of the function.
> 
> > +		} else if (r > 0) {
> 
> This else statement is not needed because we already handled the other
> cases.  Pull the code in one additional indent level.
> 
> > +			if (!pci_enable_msix(pdev, entries, r)) {
> 
> 			if (pci_enable_msix(pdev, entries, r))
> 				goto msi_int;
> 
> Pull the code in a third indent level.
> 
> > +				for (i = 0; i < r; i++) {
> > +					if (request_irq(entries[i].vector,
> > +						arcmsr_do_interrupt, 0, "arcmsr", acb)) {
> > +						pr_warn("arcmsr%d: request_irq =%d failed!\n",
> > +							acb->host->host_no, pdev->irq);
> > +						for (j = 0 ; j < i ; j++)
> > +							free_irq(entries[i].vector, acb);
> > +						pci_disable_msix(pdev);
> > +						goto MSI_INT;
> > +					}
> > +					acb->entries[i] = entries[i];
> > +				}
> > +				acb->acb_flags |= ACB_F_MSIX_ENABLED;
> > +				pr_warn("arcmsr%d: msi-x enabled\n", acb->host->host_no);
> 
> 
> Same thing.  Change this to pr_info() and add a return ARC_SUCCESS;
> 
> > +			} else {
> > +				goto MSI_INT;
> > +			}
> > +		} else {
> 
> 
> Ok.  At this point we have removed a lot of indenting so we are back to
> level 1 indenting.
> 
> msi_int:
> 	if (!pci_find_capability(pdev, PCI_CAP_ID_MSI))
> 		goto legacy_int;
> 	if (pci_enable_msi(pdev))
> 		goto legacy_int;
> 	if (request_irq(...)) {
> 		....
> 		goto legacy_int;
> 	}
> 
> > +MSI_INT:
> > +			if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
> > +				if (pci_enable_msi(pdev))
> > +					goto LEG_INT;
> > +				if (request_irq(pdev->irq, arcmsr_do_interrupt,
> > +					IRQF_SHARED, "arcmsr", acb)) {
> > +					pr_warn("arcmsr%d: request_irq =%d failed!\n",
> > +						acb->host->host_no, pdev->irq);
> > +					pci_disable_msi(pdev);
> > +					goto LEG_INT;
> > +				}
> > +				acb->acb_flags |= ACB_F_MSI_ENABLED;
> > +				pr_warn("arcmsr%d: msi enabled\n", acb->host->host_no);
> 
> return sucess.
> 
> > +			} else {
> > +				goto LEG_INT;
> > +			}
> > +		}
> 
> 
> The following block is all duplicative code and we have already handled
> msi_int.  Just delete it.
> 
> > +	} else if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
> > +		if (pci_enable_msi(pdev))
> > +			goto LEG_INT;
> > +		if (request_irq(pdev->irq, arcmsr_do_interrupt,
> > +			IRQF_SHARED, "arcmsr", acb)) {
> > +			pr_warn("arcmsr%d: request_irq =%d failed!\n",
> > +				acb->host->host_no, pdev->irq);
> > +			pci_disable_msi(pdev);
> > +			goto LEG_INT;
> > +		}
> > +		acb->acb_flags |= ACB_F_MSI_ENABLED;
> > +		pr_warn("arcmsr%d: msi enabled\n", acb->host->host_no);
> > +	} else {
> 
> Ok.  We're back to level one indenting now.
> 
> legacy_int:
> 	if (request_irq(...) {
> 		...
> 		return ARC_FAILURE;
> 	}
> 	return ARC_SUCCESS;
> 
> Flipping the conditions around and adding immediate returns makes the
> code a lot easier to read.
> 
> > +LEG_INT:
> > +		if (request_irq(pdev->irq, arcmsr_do_interrupt,
> > +			IRQF_SHARED, "arcmsr", acb)) {
> > +			pr_warn("arcmsr%d: request_irq = %d failed!\n",
> > +				acb->host->host_no, pdev->irq);
> > +			return ARC_FAILURE;
> > +		}
> > +	}
> > +	return ARC_SUCCESS;
> > +}
> > +
> 
> regards,
> dan carpenter


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/