[PATCH 6/6 v3] staging: comedi: addi_apci_1564: remove use of devpriv->s_EeParameters

[Chase Southwood]

This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.

Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
---
2: Incorrect patch title fixed.

3: I apparently failed to redo this patch properly when I changed PATCH 4/6 and
it no longer applied.  Just noticed this, and verified that the whole series
applies now.

 drivers/staging/comedi/drivers/addi_apci_1564.c | 27 +++++--------------------
 1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index d5be8d3..b34ae34 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -65,22 +65,6 @@ static int apci1564_auto_attach(struct comedi_device *dev,
 	dev->iobase = pci_resource_start(pcidev, 1);
 	devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
 
-	/* Initialize parameters that can be overridden in EEPROM */
-	devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
-	devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
-	devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
-	devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
-	devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
-	devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
-	devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
-	devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
-	devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
-		this_board->ui_MinAcquisitiontimeNs;
-	devpriv->s_EeParameters.ui_MinDelaytimeNs =
-		this_board->ui_MinDelaytimeNs;
-
-	/* ## */
-
 	if (pcidev->irq > 0) {
 		ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED,
 				  dev->board_name, dev);
@@ -114,14 +98,13 @@ static int apci1564_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise DO Subdevice Structures */
 	s = &dev->subdevices[3];
-	if (devpriv->s_EeParameters.i_NbrDoChannel) {
+	if (this_board->i_NbrDoChannel) {
 		s->type = COMEDI_SUBD_DO;
 		s->subdev_flags =
 			SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
-		s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
-		s->len_chanlist =
-			devpriv->s_EeParameters.i_NbrDoChannel;
+		s->n_chan = this_board->i_NbrDoChannel;
+		s->maxdata = this_board->i_DoMaxdata;
+		s->len_chanlist = this_board->i_NbrDoChannel;
 		s->range_table = &range_digital;
 
 		/* insn_config - for digital output memory */
@@ -135,7 +118,7 @@ static int apci1564_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise Timer Subdevice Structures */
 	s = &dev->subdevices[4];
-	if (devpriv->s_EeParameters.i_Timer) {
+	if (this_board->i_Timer) {
 		s->type = COMEDI_SUBD_TIMER;
 		s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 		s->n_chan = 1;
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/