Re: [PATCH 5/5] net: macb: Fix race between HW and driver

From: SÃren Brinkmann
Date: Mon May 05 2014 - 17:11:38 EST


On Mon, 2014-05-05 at 05:09PM -0400, David Miller wrote:
> From: SÃren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> Date: Mon, 5 May 2014 14:05:19 -0700
>
> > On Mon, 2014-05-05 at 04:56PM -0400, David Miller wrote:
> >> From: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> >> Date: Sun, 4 May 2014 15:43:02 -0700
> >>
> >> > Under "heavy" RX load, the driver cannot handle the descriptors fast
> >> > enough. In detail, when a descriptor is consumed, its used flag is
> >> > cleared and once the RX budget is consumed all descriptors with a
> >> > cleared used flag are prepared to receive more data. Under load though,
> >> > the HW may constantly receive more data and use those descriptors with a
> >> > cleared used flag before they are actually prepared for next usage.
> >> >
> >> > The head and tail pointers into the RX-ring should always be valid and
> >> > we can omit clearing and checking of the used flag.
> >> >
> >> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> >>
> >> Isn't the RX_USED bit the only thing that controls what RX entries
> >> the chip will try to use?
> >>
> >> I can't see how you can just remove the RX_USED bit handling
> >> altogether.
> >>
> >> The problem actually seems to be that in the current code we clear the
> >> RX_USED bit before we actually reallocate the buffer and set it up.
> >>
> >> It should be a bug to see the RX_USED bit set in gem_rx_refill(), and
> >> the only reason why it can happen is exactly because you're clearing it
> >> too early in gem_rx().
> >
> > I don't follow. The HW uses the descriptor and the driver handles the
> > received data. So, in gem_rx_refill we should actually only replace
> > descriptor which have the RX_USED _set_, not? Currently the test tests
> > for the opposite, since SW clears RX_USED in gem_rx. This patch just
> > removes those two parts. The RX_USED is left as is (HW should have set
> > it). And in gem_rx_refill we simply rely on the head and tail pointers
> > to refill the used descriptors. I didn't see a reason to do the additional
> > checking of the RX_USED bit.
> > After the refill the RX_USED flags are of course cleared for all
> > refilled descriptors.
>
> Aha, that makes sense, I didn't notice that RX_USED is cleared as a side
> effect of gem_rx_refill()'s work.
>
> I'll apply this series, thanks for explaining.

Thanks, but we probably wanna wait for Nicolas to test on his platforms
using macb?

SÃren


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/