Re: [PATCH] ARM: OMAP5: Redo THUMB mode switch on secondary CPU
From: Tony Lindgren
Date: Mon May 05 2014 - 20:33:13 EST
* Joel Fernandes <joelf@xxxxxx> [140429 19:54]:
> Here's a redo of the patch [1] that effectively does the same
> thing but is the right way to do things by using ENDPROC instead.
> The firmware correctly switches to THUMB before entry.
>
> The patch applies ontop of the earlier patch [1].
>
> [1] https://lkml.org/lkml/2014/4/22/1044
>
> Suggested-by: Dave Martin <Dave.Martin@xxxxxxx>
> Cc: Dave Martin <Dave.Martin@xxxxxxx>
> Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
> Cc: Nishanth Menon <nm@xxxxxx>
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Signed-off-by: Joel Fernandes <joelf@xxxxxx>
> ---
>
> Tony, the earlier patch went into your fixes, and can remain. This patch is just a simple redo of the same and can go in for v3.16, no problem. Thanks.
OK thanks, applying into omap-for-v3.16/fixes-not-urgent.
Tony
> arch/arm/mach-omap2/omap-headsmp.S | 6 +-----
> 1 file changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
> index 1809dce..bf36f26 100644
> --- a/arch/arm/mach-omap2/omap-headsmp.S
> +++ b/arch/arm/mach-omap2/omap-headsmp.S
> @@ -31,10 +31,6 @@
> * register AuxCoreBoot0.
> */
> ENTRY(omap5_secondary_startup)
> -.arm
> -THUMB( adr r9, BSYM(wait) ) @ CPU may be entered in ARM mode.
> -THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
> -THUMB( .thumb ) @ switch to Thumb now.
> wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
> ldr r0, [r2]
> mov r0, r0, lsr #5
> @@ -43,7 +39,7 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
> cmp r0, r4
> bne wait
> b secondary_startup
> -END(omap5_secondary_startup)
> +ENDPROC(omap5_secondary_startup)
> /*
> * OMAP4 specific entry point for secondary CPU to jump from ROM
> * code. This routine also provides a holding flag into which
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/