[PATCH v2 1/3] regulator: s2mps11: Fix accidental enable of buck6 ramp delay

[Krzysztof Kozlowski]

S2MPS11 supports enabling/disabling ramp delay only for buck[2346].
Other bucks have ramp delay enabled always.

However the bit shift for enabling buck6 ramp delay in register is equal
to 0. When ramp delay was set for the bucks unsupporting enable/disable
(buck[15789] and buck10), the ramp delay for buck6 was also enabled.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Fixes: b96244fad953 ("regulator: s2mps11: Don't check enable_shift before setting enable ramp rate")
---

Changes since v2:
 * Apply Axel Lin's suggestion (don't change the meaning
   of enable_shift variable).

---
 drivers/regulator/s2mps11.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index e713c162fbd4..aaca37e1424f 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -202,11 +202,16 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 	if (!ramp_enable)
 		goto ramp_disable;
 
-	ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
-				 1 << enable_shift, 1 << enable_shift);
-	if (ret) {
-		dev_err(&rdev->dev, "failed to enable ramp rate\n");
-		return ret;
+	/* Ramp delay can be enabled/disabled only for buck[2346] */
+	if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 &&
+			rdev_get_id(rdev) <= S2MPS11_BUCK4) ||
+			rdev_get_id(rdev) == S2MPS11_BUCK6)  {
+		ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
+					 1 << enable_shift, 1 << enable_shift);
+		if (ret) {
+			dev_err(&rdev->dev, "failed to enable ramp rate\n");
+			return ret;
+		}
 	}
 
 	ramp_val = get_ramp_delay(ramp_delay);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/