Re: [PATCHv5] ARM: EXYNOS: Support secondary CPU boot of Exynos4212
From: Chanwoo Choi
Date: Wed May 07 2014 - 00:38:24 EST
Dear Kukjin,
Could you please pick this patch?
Best Regards,
Chanwoo Choi
On 04/29/2014 10:37 AM, Chanwoo Choi wrote:
> From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>
> This patch fix the offset of CPU boot address and change parameter of smc call
> of SMC_CMD_CPU1BOOT command for Exynos4212.
>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
> ---
> Changes from v4:
> - Post only this patch separated from following patchset[1]
> [1] https://lkml.org/lkml/2014/4/24/873
>
> arch/arm/mach-exynos/firmware.c | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
> index 932129e..aa01c42 100644
> --- a/arch/arm/mach-exynos/firmware.c
> +++ b/arch/arm/mach-exynos/firmware.c
> @@ -18,6 +18,8 @@
>
> #include <mach/map.h>
>
> +#include <plat/cpu.h>
> +
> #include "smc.h"
>
> static int exynos_do_idle(void)
> @@ -28,13 +30,24 @@ static int exynos_do_idle(void)
>
> static int exynos_cpu_boot(int cpu)
> {
> + /*
> + * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
> + * But, Exynos4212 has only one secondary CPU so second parameter
> + * isn't used for informing secure firmware about CPU id.
> + */
> + if (soc_is_exynos4212())
> + cpu = 0;
> +
> exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
> return 0;
> }
>
> static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
> {
> - void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
> + void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c;
> +
> + if (!soc_is_exynos4212())
> + boot_reg += 4*cpu;
>
> __raw_writel(boot_addr, boot_reg);
> return 0;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/