[PATCH v2 0/7] mfd: add basic sun6i A31 PRCM support
From: Boris BREZILLON
Date: Wed May 07 2014 - 13:26:21 EST
Hello,
This patch series adds support for some functions provided by the PRCM
(Power/Reset/Clock Management) unit:
- AR100, AHB0 and APB0 clocks
- APB0 reset controller
These functions are needed to get the P2WI driver working, but more
subdevices might be added later.
Best Regards,
Boris
Changes since v1:
- fix prcm and prcm-clks DT documentation
- remove unneeded iounmap and kfree calls from sunxi_reset_remove function
- rework the AR100 clk implementation
Boris BREZILLON (7):
reset: sunxi: document sunxi's reset controllers bindings
reset: sunxi: allow MFD subdevices probe
mfd: add support for sun6i PRCM (Power/Reset/Clock Management) unit
mfd: sun6i-prcm: document DT bindings
clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
clk: sunxi: document PRCM clock compatible strings
ARM: sunxi: dt: add PRCM clk and reset controller subdevices
Documentation/devicetree/bindings/clock/sunxi.txt | 4 +
.../devicetree/bindings/mfd/sun6i-prcm.txt | 59 ++++
.../bindings/reset/allwinner,sunxi-clock-reset.txt | 21 ++
arch/arm/boot/dts/sun6i-a31.dtsi | 51 ++-
drivers/clk/sunxi/Makefile | 2 +
drivers/clk/sunxi/clk-sun6i-prcm.c | 343 +++++++++++++++++++++
drivers/mfd/Kconfig | 8 +
drivers/mfd/Makefile | 1 +
drivers/mfd/sun6i-prcm.c | 151 +++++++++
drivers/reset/reset-sunxi.c | 21 +-
10 files changed, 657 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
create mode 100644 Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
create mode 100644 drivers/clk/sunxi/clk-sun6i-prcm.c
create mode 100644 drivers/mfd/sun6i-prcm.c
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/