Re: [RFC][PATCH 1/3] PM / sleep: Flag to speed up suspend-resume of runtime-suspended devices

[Alan Stern]

On Thu, 8 May 2014, Rafael J. Wysocki wrote:

> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> 
> Currently, some subsystems (e.g. PCI and the ACPI PM domain) have to
> resume all runtime-suspended devices during system suspend, mostly
> because those devices may need to be reprogrammed due to different
> wakeup settings for system sleep and for runtime PM.
> 
> For some devices, though, it's OK to remain in runtime suspend 
> throughout a complete system suspend/resume cycle (if the device was in
> runtime suspend at the start of the cycle).  We would like to do this
> whenever possible, to avoid the overhead of extra power-up and power-down
> events.
> 
> However, problems may arise because the device's descendants may require
> it to be at full power at various points during the cycle.  Therefore the
> most straightforward way to do this safely is if the device and all its
> descendants can remain runtime suspended until the resume stage of system
> resume.
> 
> To this end, introduce dev->power.leave_runtime_suspended.
> If a subsystem or driver sets this flag during the ->prepare() callback,
> and if the flag is set in all of the device's descendants, and if the
> device is still in runtime suspend at the beginning of the ->suspend()
> callback, that callback is allowed to return 0 without clearing
> power.leave_runtime_suspended and without changing the state of the
> device, unless the current state of the device is not appropriate for
> the upcoming system sleep state (for example, the device is supposed to
> wake up the system from that state and its current wakeup settings are
> not suitable for that).  Then, the PM core will not invoke the device's
> ->suspend_late(), ->suspend_irq(), ->resume_irq(), ->resume_early(), or
> ->resume() callbacks.  Instead, it will invoke ->runtime_resume() during
> the device resume stage of system resume.

Wait a minute.  Following ->runtime_suspend(), you are going to call 
->suspend() and then ->runtime_resume()?  That doesn't seem like what 
you really want; a ->suspend() call should always have a matching 
->resume().

I guess you did it this way to allow for runtime-resumes and -suspends 
between ->prepare() and ->suspend(), but it still seems wrong.

How about asking drivers to set leave_runtime_suspended in their
->runtime_suspend() callbacks, as well as during ->prepare()?  Then
intervening runtime resume/suspend cycles wouldn't matter and you
wouldn't need to call ->suspend(); you could skip it along with the
other PM callbacks.

> By leaving this flag set after ->suspend(), a driver or subsystem tells
> the PM core that the device is runtime suspended, it is in a suitable
> state for system suspend (for example, the wakeup setting does not
> need to be changed), and it does not need to return to full
> power until the resume stage.

So: By setting this flag during ->runtime_suspend() and ->prepare(), a
driver or subsystem tells the PM core that the device is in a suitable
state for system suspend (for example, the wakeup setting would not
need to be changed), if one should occur before the next runtime
resume, and the device would not need to return to full power until the
resume stage.

> --- linux-pm.orig/include/linux/pm_runtime.h
> +++ linux-pm/include/linux/pm_runtime.h
> @@ -264,4 +264,20 @@ static inline void pm_runtime_dont_use_a
>  	__pm_runtime_use_autosuspend(dev, false);
>  }
>  
> +#ifdef CONFIG_PM_BOTH
> +static inline void __set_leave_runtime_suspended(struct device *dev, bool val)
> +{
> +	dev->power.leave_runtime_suspended = val;
> +}
> +extern void pm_set_leave_runtime_suspended(struct device *dev, bool val);
> +static inline bool pm_leave_runtime_suspended(struct device *dev)
> +{
> +	return dev->power.leave_runtime_suspended;
> +}

Is it generally your custom to use "set_" and "" rather than "set_" and 
"get_"?

>   End:
>  	if (!error) {
> +		struct device *parent = dev->parent;
> +
>  		dev->power.is_suspended = true;
> -		if (dev->power.wakeup_path
> -		    && dev->parent && !dev->parent->power.ignore_children)
> -			dev->parent->power.wakeup_path = true;
> +		if (parent) {
> +			spin_lock_irq(&parent->power.lock);
> +
> +			if (dev->power.wakeup_path
> +			    && !parent->power.ignore_children)
> +				parent->power.wakeup_path = true;
> +
> +			if (!pm_leave_runtime_suspended(dev))
> +				__set_leave_runtime_suspended(parent, false);
> +
> +			spin_unlock_irq(&parent->power.lock);
> +		}

Then of course, this code would move up, before the callback, and the 
callback would be skipped if leave_runtime_suspended was set.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/