Re: [PATCH v1 11/11] mmc: mmci: Add Qcom specific pio_read function.

[Linus Walleij]

On Tue, Apr 29, 2014 at 10:21 AM,  <srinivas.kandagatla@xxxxxxxxxx> wrote:

> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
>
> MCIFIFOCNT register behaviour on Qcom chips is very different than the other
> pl180 integrations. MCIFIFOCNT register contains the number of
> words that are still waiting to be transferred through the FIFO. It keeps
> decrementing once the host CPU reads the MCIFIFO. With the existing logic and
> the MCIFIFOCNT behaviour, mmci_pio_read will loop forever, as the FIFOCNT
> register will always return transfer size before reading the FIFO.
>
> Also the data sheet states that "This register is only useful for debug
> purposes and should not be used for normal operation since it does not reflect
> data which may or may not be in the pipeline".
>
> This patch implements qcom_pio_read function so as existing mmci_pio_read is
> not suitable for Qcom SOCs.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
(...)

> +static int mmci_qcom_pio_read(struct mmci_host *host, char *buffer,
> +                        unsigned int remain)
> +{
> +       uint32_t        *ptr = (uint32_t *) buffer;

Just use u32 for this.

> +       int             count = 0;
> +       struct variant_data *variant = host->variant;
> +       int             fifo_size = variant->fifosize;
> +
> +       if (remain % 4)
> +               remain = ((remain >> 2) + 1) << 2;

Explain in a comment exactly what is happening here or noone will
understand the code.

> +       while (readl(host->base + MMCISTATUS) & MCI_RXDATAAVLBL) {
> +               *ptr = readl(host->base + MMCIFIFO + (count % fifo_size));
> +               ptr++;
> +               count += sizeof(uint32_t);
> +               remain -=  sizeof(uint32_t);


sizeof(u32) or just 4 works for these...

count += 4;
remain -= 4;

Is easier to parse and understand I think.

> +               if (remain == 0)
> +                       break;

if (!remain)
  break;

> +       }
> +       return count;
> +}

> -               if (status & MCI_RXACTIVE)
> -                       len = mmci_pio_read(host, buffer, remain);
> +               if (status & MCI_RXACTIVE) {
> +                       if (host->hw_designer == AMBA_VENDOR_QCOM)
> +                               len = mmci_qcom_pio_read(host, buffer, remain);
> +                       else
> +                               len = mmci_pio_read(host, buffer, remain);
> +               }

Use something like bool qcom_fifo; in vendor data instead.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/