Re: [PATCH RESEND v4 1/8] clk: sunxi: Implement A31 USB clock

[Emilio López]

Hi Maxime,

El 13/05/14 12:44, Maxime Ripard escribió:
> The A31 USB clock slightly differ from its older counterparts, mostly because
> it has a different gate for each PHY, while the older one had a single gate for
> all the phy.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> Acked-by: Mike Turquette <mturquette@xxxxxxxxxx>

I have queued this commit in sunxi-clk-for-mike for my 3.16 pull. I have 
also queued the trivial patch below to keep the new compatible documented.

Cheers,

Emilio

--->8---

clk: sunxi: document new A31 USB clock compatible

Support for the USB gates and resets on A31 has been recently added
using a new compatible, so let's document it here.

Signed-off-by: Emilio López <emilio@xxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt 
b/Documentation/devicetree/bindings/clock/sunxi.txt
index a5160d8..1f6d3f4 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -41,6 +41,7 @@ Required properties:
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
 	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
 	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
+	"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31

 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/