Re: [PATCH 0/3] Add DRA7xx CPSW Ethernet support in Device Tree

[Tony Lindgren]

* Mugunthan V N <mugunthanvnm@xxxxxx> [140513 01:54]:
> Tony/Benoit
> 
> On Tuesday 13 May 2014 01:34 PM, Mugunthan V N wrote:
> > Adding device tree entry for CPSW to make it work in Dual EMAC mode.
> >
> > DRA7 cpsw phy sel driver patch has been pulled in net-next git with the
> > following commit id *d415fa1b88748d664b7b6a310dd8e699d2686cf7*
> >
> > Mugunthan V N (3):
> >   pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC
> >   arm/dts: dra7xx: Add CPSW and MDIO module nodes for dra7xx
> >   arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM
> >
> >  arch/arm/boot/dts/dra7-evm.dts    | 103 ++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/dra7.dtsi       |  59 ++++++++++++++++++++++
> >  include/dt-bindings/pinctrl/dra.h |   8 +++
> >  3 files changed, 170 insertions(+)
> >
> 
> This patch series depends on Cross bar dt patch set
> http://comments.gmane.org/gmane.linux.drivers.devicetree/73025

That's not enabled yet and sounds like it needs some more work.
I suggest you repost this tested without the crossbar.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/