[RFC PATCH 09/10] ARM: tegra124: Add XHCI controller and PHY
From: Andrew Bresticker
Date: Wed May 14 2014 - 20:33:48 EST
And nodes for the XHCI host controller and XUSB PHY present on Tegra124.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
---
arch/arm/boot/dts/tegra124.dtsi | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 47fb61c..ee3209bc 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -462,6 +462,43 @@
clock-names = "pclk", "clk32k_in";
};
+ usb@0,70090000 {
+ compatible = "nvidia,tegra124-xhci";
+ reg = <0x0 0x70090000 0x0 0x8000>,
+ <0x0 0x70098000 0x0 0x1000>,
+ <0x0 0x70099000 0x0 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+ <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>;
+ clock-names = "xusb_host", "xusb_falcon_src";
+ resets = <&tegra_car 89>;
+ reset-names = "xusb_host";
+ phys = <&xusb_phy>;
+ phy-names = "xusb";
+ status = "disabled";
+ };
+
+ xusb_phy: phy@0,7009f000 {
+ compatible = "nvidia,tegra124-xusb-phy";
+ reg = <0x0 0x7009f000 0x0 0x1000>;
+ #phy-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_XUSB_SS>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+ <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+ <&tegra_car TEGRA124_CLK_CLK_M>,
+ <&tegra_car TEGRA124_CLK_PLL_E>;
+ clock-names = "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+ "xusb_fs_src", "pll_u_480M", "clk_m",
+ "pll_e";
+ resets = <&tegra_car 156>;
+ reset-names = "xusb_ss";
+ nvidia,clkrst = <&tegra_car>;
+ status = "disabled";
+ };
+
sdhci@0,700b0000 {
compatible = "nvidia,tegra124-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
--
1.9.1.423.g4596e3a
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/