Re: [Patch V2 0/9] I2C ACPI operation region handler support

From: Rolf Eike Beer
Date: Thu May 15 2014 - 03:50:53 EST

Lan Tianyu wrote:
> On 05/13/2014 09:09 PM, Rolf Eike Beer wrote:
> > Am Montag, 28. April 2014, 22:27:39 schrieb Lan Tianyu:
> >> ACPI 5.0 spec(5.5.2.4.5) defines GenericSerialBus(i2c, spi, uart)
> >> operation
> >> region. It allows ACPI aml code able to access such kind of devices to
> >> implement some ACPI standard method.
> >>
> >> On the Asus T100TA, Bios use GenericSerialBus operation region to access
> >> i2c device to get battery info. So battery function depends on the I2C
> >> operation region support. Here is the bug link.
> >> https://bugzilla.kernel.org/show_bug.cgi?idi011
> >
> > Hi all,
>
> > I have tested this series and got some errors, but no additional
functionality:
> Hi Rolf:
> Thanks for test. Could you attach the output of dmesg and acpidump?
> Which machine you are testing on?

Hi,

this is an Aava Inari 8 tablet (pre-release hardware). Please find the DSDT
and the dmesg.log attached.

In case of any further questions don't hesitate to ask, I'll try to be more
responsible.

Regards,

Eike
--
Rolf Eike Beer, emlix GmbH, http://www.emlix.com
Fon +49 551 30664-0, Fax +49 551 30664-11
Bertha-von-Suttner-Str. 9, 37085 Göttingen, Germany
Sitz der Gesellschaft: Göttingen, Amtsgericht Göttingen HR B 3160
Geschäftsführung: Dr. Uwe Kracke, Ust-IdNr.: DE 205 198 055

emlix - smart embedded open source

Attachment: dsdt.dat
Description: Binary data

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.0-rc5-Inari (root@devpool02) (gcc version 4.6.4 (Emlix Linux Inari) ) #1 SMP Tue May 13 08:40:31 UTC 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078345fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078346000-0x0000000078c45fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078c46000-0x0000000078d45fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000078d46000-0x0000000078d85fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000078d86000-0x00000000794c7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000794c8000-0x0000000079dc7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079dc8000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x78d85014 SMBIOS=0x78c45000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem03: type, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001ded000) (13MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001ded000-0x0000000020000000) (482MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020100000-0x0000000071dc0000) (1308MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000071dc0000-0x0000000071de0000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000071de0000-0x0000000073356000) (21MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000073356000-0x0000000073358000) (0MB)
[ 0.000000] efi: mem14: type=1, attr=0xf, range=[0x0000000073358000-0x0000000073b46000) (7MB)
[ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000073b46000-0x0000000076a92000) (47MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x0000000076a92000-0x00000000774ec000) (10MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000774ec000-0x00000000774f9000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000774f9000-0x0000000077d46000) (8MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000077d46000-0x0000000078161000) (4MB)
[ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x0000000078161000-0x0000000078346000) (1MB)
[ 0.000000] efi: mem21: type=5, attr=0x800000000000000f, range=[0x0000000078346000-0x0000000078546000) (2MB)
[ 0.000000] efi: mem22: type=6, attr=0x800000000000000f, range=[0x0000000078546000-0x0000000078846000) (3MB)
[ 0.000000] efi: mem23: type=0, attr=0xf, range=[0x0000000078846000-0x0000000078c46000) (4MB)
[ 0.000000] efi: mem24: type, attr=0xf, range=[0x0000000078c46000-0x0000000078d46000) (1MB)
[ 0.000000] efi: mem25: type=9, attr=0xf, range=[0x0000000078d46000-0x0000000078d86000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x0000000078d86000-0x00000000794c8000) (7MB)
[ 0.000000] efi: mem27: type, attr=0xf, range=[0x00000000794c8000-0x0000000079dc8000) (9MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x0000000079dc8000-0x000000007a000000) (2MB)
[ 0.000000] efi: mem29: type, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem30: type, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem31: type, attr=0x8000000000000000, range=[0x00000000ffd00000-0x0000000100000000) (3MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Aava Mobile Oy Inari 8 2GB/Type2 - Board Product Name, BIOS BYT.5.03.47.0033-022 01/16/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFD00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 040000000 mask FE0000000 write-back
[ 0.000000] 3 base 060000000 mask FF0000000 write-back
[ 0.000000] 4 base 070000000 mask FF8000000 write-back
[ 0.000000] 5 base 078000000 mask FFC000000 write-back
[ 0.000000] 6 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 7 base 07AE00000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x2fffffff]
[ 0.000000] [mem 0x20100000-0x203fffff] page 4k
[ 0.000000] [mem 0x20400000-0x2fffffff] page 2M
[ 0.000000] BRK [0x01cd0000, 0x01cd0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01cd1000, 0x01cd1fff] PGTABLE
[ 0.000000] ACPI: RSDP 0x78D85014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x78D61188 0000D4 (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x78D7F000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x78D6E000 00BAEC (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x78D84000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: TCPA 0x78D83000 000032 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x78D81000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x78D80000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x78D7E000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x78D7D000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x78D7C000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x78D7B000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x78D7A000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D6D000 0005FB (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D6B000 0018C2 (v01 INSYDE DptfTab 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D6A000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D69000 0000FF (v01 INSYDE SoCDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D68000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x78D67000 000034 (v03 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D66000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D65000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D64000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x78D63000 000044 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x78D62000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x78D60000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1064MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01cd2000, 0x01cd2fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x79ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0x78345fff]
[ 0.000000] node 0: [mem 0x78d86000-0x794c7fff]
[ 0.000000] node 0: [mem 0x79dc8000-0x79ffffff]
[ 0.000000] On node 0 totalpages: 494428
[ 0.000000] free_area_init_node: node 0, pgdat c17500c0, node_mem_map f68be020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 222974 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2129 pages used for memmap
[ 0.000000] HighMem zone: 267458 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7af00000-0x7eefffff
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 103
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6882000 s27200 r0 d21952 u49152
[ 0.000000] pcpu-alloc: s27200 r0 d21952 u49152 alloc*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 492652
[ 0.000000] Kernel command line: root=/dev/sda2 video=HDMI-A-1:1200x1920e drm_kms_helper.edid_firmware=HDMI-A-1:edid/1200x1920.bin
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007a000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1916980K/1977712K available (5569K kernel code, 331K rwdata, 1640K rodata, 4280K init, 1232K bss, 60732K reserved, 1038956K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff66000 - 0xfffff000 ( 612 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1760000 - 0xc1b8e000 (4280 kB)
[ 0.000000] .data : 0xc1570a99 - 0xc175eec0 (1977 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1570a99 (5570 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalignd, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:1024 16
[ 0.000000] CPU 0 irqstacks, hardö000 softö000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0xa
[ 0.000000] Resolved frequency ID: 2, frequency: 133200 KHz
[ 0.000000] TSC runs at 1332000 KHz
[ 0.000000] lapic_timer_frequency = 133200
[ 0.000000] tsc: Detected 1332.000 MHz processor
[ 0.000038] Calibrating delay loop (skipped), value calculated using timer frequency.. 2664.00 BogoMIPS (lpj32000)
[ 0.000056] pid_max: default: 32768 minimum: 301
[ 0.000073] ACPI: Core revision 20140214
[ 0.045134] ACPI: All ACPI Tables successfully acquired
[ 0.048115] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.048134] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.048462] Initializing cgroup subsys freezer
[ 0.048505] CPU: Physical Processor ID: 0
[ 0.048515] CPU: Processor Core ID: 0
[ 0.048525] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.048525] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.060656] mce: CPU supports 6 MCE banks
[ 0.060675] CPU0: Thermal monitoring enabled (TM1)
[ 0.060696] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.060696] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.060696] tlb_flushall_shift: 6
[ 0.060903] Freeing SMP alternatives memory: 20K (c1b8e000 - c1b93000)
[ 0.060940] ------------[ cut here ]------------
[ 0.060959] WARNING: CPU: 0 PID: 0 at /tmp/e2/build/linux-git/mm/early_ioremap.c:136 __early_ioremap+0xbe/0x1c2()
[ 0.060972] Modules linked in:
[ 0.060985] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc5-Inari #1
[ 0.060995] Hardware name: Aava Mobile Oy Inari 8 2GB/Type2 - Board Product Name, BIOS BYT.5.03.47.0033-022 01/16/2014
[ 0.061009] 00000000 00000000 c170df00 c1564914 c16631ec c170df30 c103e4aa c165b654
[ 0.061047] 00000000 00000000 c16631ec 00000088 c177cdf5 c177cdf5 00041ee6 00005800
[ 0.061069] c1b97800 c170df40 c103e4ed 00000009 00000000 c170df98 c177cdf5 00000000
[ 0.061090] Call Trace:
[ 0.061105] [<c1564914>] dump_stack+0x41/0x52
[ 0.061119] [<c103e4aa>] warn_slowpath_common+0x7a/0xa0
[ 0.061132] [<c177cdf5>] ? __early_ioremap+0xbe/0x1c2
[ 0.061144] [<c177cdf5>] ? __early_ioremap+0xbe/0x1c2
[ 0.061156] [<c103e4ed>] warn_slowpath_null+0x1d/0x20
[ 0.061168] [<c177cdf5>] __early_ioremap+0xbe/0x1c2
[ 0.061182] [<c10c4b42>] ? __get_free_pages+0x22/0x30
[ 0.061196] [<c10f217a>] ? __kmalloc+0xea/0xf0
[ 0.061209] [<c177d0b8>] early_memremap+0xd/0xf
[ 0.061221] [<c1773828>] efi_bgrt_init+0xf0/0x135
[ 0.061234] [<c1773150>] efi_late_init+0x8/0xa
[ 0.061247] [<c1760a34>] start_kernel+0x34f/0x35f
[ 0.061259] [<c1760520>] ? repair_env_string+0x51/0x51
[ 0.061272] [<c176036b>] i386_start_kernel+0x139/0x13c
[ 0.061294] ---[ end trace d7b23e2954b99569 ]---
[ 0.064345] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.065379] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075406] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.075416] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.075425] ..... (found apic 0 pin 2) ...
[ 0.085441] ....... works.
[ 0.085450] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3745 @ 1.33GHz (fam: 06, model: 37, stepping: 08)
[ 0.085489] TSC deadline timer enabled
[ 0.085505] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.085531] ... version: 3
[ 0.085539] ... bit width: 40
[ 0.085547] ... generic registers: 2
[ 0.085555] ... value mask: 000000ffffffffff
[ 0.085563] ... max period: 000000ffffffffff
[ 0.085571] ... fixed-purpose events: 3
[ 0.085579] ... event mask: 0000000700000003
[ 0.087178] CPU 1 irqstacks, hardö000 softö000
[ 0.087184] x86: Booting SMP configuration:
[ 0.087195] .... node #0, CPUs: #1
[ 0.097309] Initializing CPU#1
[ 0.112526] CPU 2 irqstacks, hardö000 softö000
[ 0.112545] #2
[ 0.122597] Initializing CPU#2
[ 0.137915] CPU 3 irqstacks, hardö000 softö000
[ 0.137929] #3
[ 0.147984] Initializing CPU#3
[ 0.163166] x86: Booted up 1 node, 4 CPUs
[ 0.163186] smpboot: Total of 4 processors activated (10656.00 BogoMIPS)
[ 0.164201] devtmpfs: initialized
[ 0.164699] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.164716] PM: Registering ACPI NVS region [mem 0x78c46000-0x78d45fff] (1048576 bytes)
[ 0.164769] PM: Registering ACPI NVS region [mem 0x794c8000-0x79dc7fff] (9437184 bytes)
[ 0.165321] pinctrl core: initialized pinctrl subsystem
[ 0.165383] RTC time: 2:41:48, date: 05/13/14
[ 0.165472] NET: Registered protocol family 16
[ 0.165800] cpuidle: using governor ladder
[ 0.165812] cpuidle: using governor menu
[ 0.165887] ACPI: bus type PCI registered
[ 0.166044] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.166062] PCI: not using MMCONFIG
[ 0.166410] PCI: Using configuration type 1 for base access
[ 0.171661] ACPI: Added _OSI(Module Device)
[ 0.171676] ACPI: Added _OSI(Processor Device)
[ 0.171686] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.171695] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.207365] ACPI: SSDT 0x78BCAA90 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.208929] ACPI: Dynamic OEM Table Load:
[ 0.208943] ACPI: SSDT 0x00000000 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.209485] ACPI: SSDT 0x78BC9910 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.211341] ACPI: Dynamic OEM Table Load:
[ 0.211354] ACPI: SSDT 0x00000000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.219899] ACPI: SSDT 0x78BCBD90 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.221480] ACPI: Dynamic OEM Table Load:
[ 0.221494] ACPI: SSDT 0x00000000 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.224032] ACPI: SSDT 0x78BCBF10 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.225433] ACPI: Dynamic OEM Table Load:
[ 0.225447] ACPI: SSDT 0x00000000 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.231309] ACPI: Interpreter enabled
[ 0.231344] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.231369] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.231391] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140214/hwxface-580)
[ 0.231413] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140214/hwxface-580)
[ 0.231434] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140214/hwxface-580)
[ 0.231452] ACPI: (supports S0)
[ 0.231461] ACPI: Using IOAPIC for interrupt routing
[ 0.231553] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.239081] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[ 0.239099] PCI: not using MMCONFIG
[ 0.239157] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.242534] ACPI: Power Resource [USBC] (on)
[ 0.246624] ACPI: Power Resource [WWPR] (off)
[ 0.257294] ACPI: Power Resource [PLPE] (on)
[ 0.269398] ACPI: Power Resource [CLK0] (on)
[ 0.269544] ACPI: Power Resource [CLK1] (on)
[ 0.269912] ACPI: Power Resource [P28X] (off)
[ 0.270071] ACPI: Power Resource [P18X] (off)
[ 0.272628] ACPI: Power Resource [TCPR] (off)
[ 0.279832] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.279860] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.280083] \_SB_.PCI0:_OSC invalid UUID
[ 0.280088] _OSC request data:1 1e 0
[ 0.280100] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.281420] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.281505] PCI host bridge to bus 0000:00
[ 0.281520] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.281533] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.281545] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.281557] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.281569] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.281581] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.281593] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.281606] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff]
[ 0.281618] pci_bus 0000:00: root bus resource [mem 0x7af00001-0x7ef00000]
[ 0.281630] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe]
[ 0.281642] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
[ 0.281667] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.281861] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.281886] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.281906] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.281924] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.282151] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.282182] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[ 0.282262] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.282440] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.282472] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[ 0.282489] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[ 0.282590] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.282765] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.282991] pci_bus 0000:00: on NUMA node 0
[ 0.284118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.284441] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.284761] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.285090] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.285410] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.285730] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.286050] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.286379] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.298870] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 0.299585] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 0.300369] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.300387] vgaarb: loaded
[ 0.300394] vgaarb: bridge control possible 0000:00:02.0
[ 0.300615] SCSI subsystem initialized
[ 0.300634] ACPI: bus type USB registered
[ 0.300722] usbcore: registered new interface driver usbfs
[ 0.300766] usbcore: registered new interface driver hub
[ 0.300847] usbcore: registered new device driver usb
[ 0.310724] pps_core: LinuxPPS API ver. 1 registered
[ 0.310737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.310766] PTP clock support registered
[ 0.311025] Advanced Linux Sound Architecture Driver Initialized.
[ 0.311037] PCI: Using ACPI for IRQ routing
[ 0.311047] PCI: pci_cache_line_size set to 64 bytes
[ 0.311072] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.311085] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.311090] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.311095] e820: reserve RAM buffer [mem 0x78346000-0x7bffffff]
[ 0.311100] e820: reserve RAM buffer [mem 0x794c8000-0x7bffffff]
[ 0.311105] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.311559] cfg80211: Calling CRDA to update world regulatory domain
[ 0.311786] Switched to clocksource refined-jiffies
[ 0.311915] pnp: PnP ACPI init
[ 0.311939] ACPI: bus type PNP registered
[ 0.312056] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.312247] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.312343] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.312471] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.312487] system 00:03: [io 0x0400-0x047f] has been reserved
[ 0.312500] system 00:03: [io 0x0500-0x05fe] has been reserved
[ 0.312513] system 00:03: [io 0x0600-0x061f] has been reserved
[ 0.312525] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.312539] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312898] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.314419] pnp 00:05: Plug and Play ACPI device, IDs INT0002 (active)
[ 0.314596] pnp 00:06: Plug and Play ACPI device, IDs INT33fc (active)
[ 0.314770] pnp 00:07: Plug and Play ACPI device, IDs INT33fc (active)
[ 0.314944] pnp 00:08: Plug and Play ACPI device, IDs INT33fc (active)
[ 0.316122] pnp 00:09: unknown resource type 19 in _CRS
[ 0.316136] pnp 00:09: can't evaluate _CRS: 1
[ 0.316211] pnp 00:09: Plug and Play ACPI device, IDs BCM2e3a (active)
[ 0.323337] pnp 00:0a: unknown resource type 17 in _CRS
[ 0.323352] pnp 00:0a: can't evaluate _CRS: 1
[ 0.323447] pnp 00:0a: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active)
[ 0.323599] pnp 00:0b: Plug and Play ACPI device, IDs INT33bd (active)
[ 0.323947] pnp 00:0c: Plug and Play ACPI device, IDs INT3401 (active)
[ 0.324267] pnp 00:0d: unknown resource type 17 in _CRS
[ 0.324281] pnp 00:0d: can't evaluate _CRS: 1
[ 0.324361] pnp 00:0d: Plug and Play ACPI device, IDs INT3403 (active)
[ 0.324502] pnp 00:0e: unknown resource type 17 in _CRS
[ 0.324515] pnp 00:0e: can't evaluate _CRS: 1
[ 0.324594] pnp 00:0e: Plug and Play ACPI device, IDs INT3403 (active)
[ 0.324790] pnp 00:0f: unknown resource type 17 in _CRS
[ 0.324804] pnp 00:0f: can't evaluate _CRS: 1
[ 0.324888] pnp 00:0f: Plug and Play ACPI device, IDs INT3409 (active)
[ 0.325189] pnp: PnP ACPI: found 16 devices
[ 0.325200] ACPI: bus type PNP unregistered
[ 0.330327] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.330335] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.330342] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.330348] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.330354] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.330361] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.330367] pci_bus 0000:00: resource 10 [mem 0x90c00000-0x90ffffff]
[ 0.330373] pci_bus 0000:00: resource 11 [mem 0x7af00001-0x7ef00000]
[ 0.330379] pci_bus 0000:00: resource 12 [mem 0x80000000-0x908ffffe]
[ 0.330386] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed40fff]
[ 0.330439] NET: Registered protocol family 2
[ 0.330776] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.330825] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.330892] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.330933] TCP: reno registered
[ 0.330945] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.330967] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.331076] NET: Registered protocol family 1
[ 0.331114] pci 0000:00:02.0: Boot video device
[ 0.331512] PCI: CLS 0 bytes, default 64
[ 0.514091] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x808
[ 0.514123] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x808
[ 0.514152] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x808
[ 0.514181] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x808
[ 0.514325] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.515032] Scanning for low memory corruption every 60 seconds
[ 0.515717] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.515772] audit: initializing netlink subsys (disabled)
[ 0.515816] audit: type 00 audit(1399948908.496:1): initialized
[ 0.553602] bounce pool size: 64 pages
[ 0.553620] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.559083] msgmni has been set to 1775
[ 0.559837] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.559853] io scheduler noop registered
[ 0.559862] io scheduler deadline registered
[ 0.560024] io scheduler cfq registered (default)
[ 0.560385] intel_idle: MWAIT substates: 0x33000020
[ 0.560391] intel_idle: v0.4 model 0x37
[ 0.560395] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.567555] ACPI: AC Adapter [ADP1] (on-line)
[ 0.567897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.567919] ACPI: Power Button [PWRF]
[ 0.567932] ACPI Warning: Could not enable fixed event - PowerButton (2) (20140214/evxface-628)
[ 0.571549] button: probe of LNXPWRBN:00 failed with error -22
[ 0.577570] [Firmware Bug]: No valid trip found
[ 0.577864] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.598273] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.599334] 80860F0A:00: ttyS1 at MMIO 0x9091d000 (irq = 39, base_baud = 2764800) is a 16550A
[ 0.599604] 80860F0A:01: ttyS2 at MMIO 0x9091f000 (irq = 40, base_baud = 2764800) is a 16550A
[ 0.599962] hpet: number irqs doesn't agree with number of timers
[ 0.600113] Non-volatile memory driver v1.3
[ 0.600193] [drm] Initialized drm 1.1.0 20060810
[ 0.602197] [drm] Memory usable by graphics device = 2048M
[ 0.607442] ACPI Error: Error attaching device[f60238a0] data
[ 0.607460] (20140214/bus-143)
[ 0.607708] ACPI Error: Error attaching device[f60238a0] data
[ 0.607724] (20140214/bus-143)
[ 0.607987] ACPI Error: Error attaching device[f60238a0] data
[ 0.608003] (20140214/bus-143)
[ 0.608251] ACPI Error: Error attaching device[f60238a0] data
[ 0.608267] (20140214/bus-143)
[ 0.608515] ACPI Error: Error attaching device[f60238a0] data
[ 0.608531] (20140214/bus-143)
[ 0.610972] i915 0000:00:02.0: irq 103 for MSI/MSI-X
[ 0.610990] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.611001] [drm] Driver supports precise vblank timestamp query.
[ 0.661459] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.662265] ACPI Error: Error attaching device[f60238a0] data
[ 0.662282] (20140214/bus-143)
[ 0.662679] ACPI Error: Error attaching device[f60238a0] data
[ 0.662696] (20140214/bus-143)
[ 1.172920] [drm] forcing HDMI-A-1 connector ON
[ 1.246457] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 1.267084] [drm] Got external EDID base block and 0 extensions from "edid/1200x1920.bin" for connector "HDMI-A-1"
[ 1.408227] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[ 1.501620] fbcon: inteldrmfb (fb0) is primary device
[ 1.624664] Switched to clocksource tsc
[ 2.012203] Console: switching to colour frame buffer device 150x120
[ 2.041805] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.041936] i915 0000:00:02.0: registered panic notifier
[ 2.046235] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.048005] acpi device:1a: registered as cooling_device4
[ 2.049449] acpi device:21: registered as cooling_device5
[ 2.049750] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 2.050029] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.050526] brd: module loaded
[ 2.051083] loop: module loaded
[ 2.051814] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.052059] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.052384] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.052427] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X
[ 2.052569] usb usb1: New USB device found, idVendor6b, idProduct02
[ 2.052718] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.052870] usb usb1: Product: xHCI Host Controller
[ 2.052985] usb usb1: Manufacturer: Linux 3.15.0-rc5-Inari xhci_hcd
[ 2.053119] usb usb1: SerialNumber: 0000:00:14.0
[ 2.053529] hub 1-0:1.0: USB hub found
[ 2.053640] hub 1-0:1.0: 6 ports detected
[ 2.055344] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.055551] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.055801] usb usb2: New USB device found, idVendor6b, idProduct03
[ 2.055948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.056173] usb usb2: Product: xHCI Host Controller
[ 2.056281] usb usb2: Manufacturer: Linux 3.15.0-rc5-Inari xhci_hcd
[ 2.056414] usb usb2: SerialNumber: 0000:00:14.0
[ 2.056825] hub 2-0:1.0: USB hub found
[ 2.056928] hub 2-0:1.0: 1 port detected
[ 2.057430] usbcore: registered new interface driver usb-storage
[ 2.057694] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.825230] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
[ 3.101867] i8042: No controller found
[ 3.102091] mousedev: PS/2 mouse device common for all mice
[ 3.102390] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20140214/evxface-628)
[ 3.102794] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 3.102963] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram
[ 3.103164] i2c /dev entries driver
[ 3.104656] Intel P-state driver initializing.
[ 3.104782] Intel pstate controlling: cpu 0
[ 3.104913] Intel pstate controlling: cpu 1
[ 3.105039] Intel pstate controlling: cpu 2
[ 3.105167] Intel pstate controlling: cpu 3
[ 3.105381] sdhci: Secure Digital Host Controller Interface driver
[ 3.105514] sdhci: Copyright(c) Pierre Ossman
[ 3.106808] mmc0: no vqmmc regulator found
[ 3.106900] mmc0: no vmmc regulator found
[ 3.108138] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 3.109672] mmc1: no vqmmc regulator found
[ 3.109765] mmc1: no vmmc regulator found
[ 3.111002] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 3.111624] sdhci-acpi 80860F14:01: failed to setup card detect gpio
[ 3.112767] mmc2: no vqmmc regulator found
[ 3.112857] mmc2: no vmmc regulator found
[ 3.114086] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 3.114270] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.114403] EFI Variables Facility v0.08 2004-May-17
[ 3.124197] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.124699] usbcore: registered new interface driver usbhid
[ 3.124801] usbhid: USB HID core driver
[ 3.125249] TCP: cubic registered
[ 3.125328] Initializing XFRM netlink socket
[ 3.125678] NET: Registered protocol family 10
[ 3.126149] sit: IPv6 over IPv4 tunneling driver
[ 3.126519] NET: Registered protocol family 17
[ 3.128471] Using IPI No-Shortcut mode
[ 3.128835] registered taskstats version 1
[ 3.129457] Magic number: 14:311:662
[ 3.129606] console [netcon0] enabled
[ 3.129673] netconsole: network logging started
[ 3.129949] PM: Hibernation image not present or could not be loaded.
[ 3.129958] ALSA device list:
[ 3.130014] No soundcards found.
[ 3.130135] Warning: unable to open an initial console.
[ 3.132093] Freeing unused kernel memory: 4280K (c1760000 - c1b8e000)
[ 3.152787] udevd[950]: starting version 173
[ 3.221479] mmc0: BKOPS_EN bit is not set
[ 3.291604] mmc0: new HS200 MMC card at address 0001
[ 3.293171] mmcblk0: mmc0:0001 HCG8e 58.2 GiB
[ 3.299431] mmcblk0boot0: mmc0:0001 HCG8e partition 1 4.00 MiB
[ 3.306618] mmcblk0boot1: mmc0:0001 HCG8e partition 2 4.00 MiB
[ 3.308595] mmcblk0rpmb: mmc0:0001 HCG8e partition 3 4.00 MiB
[ 3.310774] mmcblk0: p1 p2
[ 3.314502] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.315181] mmcblk0boot1: unknown partition table
[ 3.318619] mmcblk0boot0:
[ 3.325628] usb 2-1: New USB device found, idVendor51, idProduct€46
[ 3.325736] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.326706] hub 2-1:1.0: USB hub found
[ 3.326807] hub 2-1:1.0: 4 ports detected
[ 3.457397] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.614821] usb 1-1: New USB device found, idVendor51, idProduct€44
[ 3.638906] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 3.662978] usb 1-1: SerialNumber: 420208698DA1
[ 3.687826] hub 1-1:1.0: USB hub found
[ 3.711486] Clocksource tsc unstable (delta = 86056090 ns)
[ 3.735632] Switched to clocksource refined-jiffies
[ 3.735695] hub 1-1:1.0: 4 ports detected
[ 3.871722] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 4.046409] usb 1-3: New USB device found, idVendord1, idProduct70
[ 4.070299] usb 1-3: New USB device strings: Mfr=5, Product=4, SerialNumber=0
[ 4.094161] usb 1-3: Product: HUAWEI Mobile Broadband Module
[ 4.117914] usb 1-3: Manufacturer: Huawei Technologies Co., Ltd.
[ 4.287085] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[ 4.469915] usb 1-4: New USB device found, idVendor 51, idProduct03
[ 4.493603] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.517281] usb 1-4: Product: DataTraveler 2.0
[ 4.540866] usb 1-4: Manufacturer: Kingston
[ 4.564397] usb 1-4: SerialNumber: 89900000000000000000017E
[ 4.588912] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 4.612720] scsi0 : usb-storage 1-4:1.0
[ 4.707537] usb 1-1.2: new high-speed USB device number 5 using xhci_hcd
[ 4.814374] usb 1-1.2: New USB device found, idVendor24, idProductu00
[ 4.837670] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.860860] usb 1-1.2: Product: LAN7500
[ 4.883907] usb 1-1.2: Manufacturer: SMSC
[ 4.906875] usb 1-1.2: SerialNumber: 00800f11700e
[ 5.005944] usb 1-1.3: new low-speed USB device number 6 using xhci_hcd
[ 5.120893] usb 1-1.3: New USB device found, idVendor6d, idProductÃ2
[ 5.143940] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.166934] usb 1-1.3: Product: USB Multimedia Keyboard
[ 5.189795] usb 1-1.3: Manufacturer: LITEON Technology
[ 5.213180] usb 1-1.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[ 5.240839] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C312.0001/input/input2
[ 5.288118] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:14.0-1.3/input0
[ 6.046665] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 6.072550] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.097262] sd 0:0:0:0: [sda] 7856128 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 6.122493] sd 0:0:0:0: [sda] Write Protect is off
[ 6.147054] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 6.147419] sd 0:0:0:0: [sda] No Caching mode page found
[ 6.171970] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.199476] sda: sda1 sda2
[ 6.234277] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.565533] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 6.594874] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 6.633506] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.912041] random: nonblocking pool is initialized
[ 7.850402] udevd[1663]: starting version 173
[ 7.985774] sst-acpi 80860F28:00: Direct firmware load failed with error -2
[ 7.996052] sst-acpi 80860F28:00: Falling back to user helper
[ 8.073790] smsc75xx v1.0.0
[ 8.088302] sst-acpi 80860F28:00: Cannot load firmware intel/fw_sst_0f28.bin-i2s_master
[ 8.088802] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered
[ 8.088820] platform byt-rt5640: Driver byt-rt5640 requests probe deferral
[ 8.097125] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered
[ 8.097140] platform byt-rt5640: Driver byt-rt5640 requests probe deferral
[ 8.136577] smsc75xx 1-1.2:1.0 eth0: register 'smsc75xx' at usb-0000:00:14.0-1.2, smsc75xx USB 2.0 Gigabit Ethernet, 70:2f:97:00:22:4f
[ 8.145263] usbcore: registered new interface driver smsc75xx
[ 8.145392] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered
[ 8.145429] platform byt-rt5640: Driver byt-rt5640 requests probe deferral
[ 16.314692] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 16.343169] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 16.369905] mmcblk0rpmb: retrying using single block read
[ 16.398887] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 16.428174] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 16.457259] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 16.486166] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 16.514941] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 16.543616] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 16.569984] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 16.596349] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 24.832319] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 24.861222] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 24.888253] mmcblk0rpmb: retrying using single block read
[ 24.917282] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 24.946559] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 24.975652] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 25.004522] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 25.033198] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 25.061704] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 25.087896] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 25.114126] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 33.349878] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 33.378699] mmcblk0rpmb: error -110 transferring data, sector 0, nr 16, cmd response 0x900, card status 0xb00
[ 33.405713] mmcblk0rpmb: retrying using single block read
[ 33.434832] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 33.464123] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 33.493276] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 33.522318] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 33.551240] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 33.580067] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 33.606641] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 33.633265] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 33.660054] end_request: I/O error, dev mmcblk0rpmb, sector 8
[ 33.686867] Buffer I/O error on device mmcblk0rpmb, logical block 1
[ 41.927437] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 41.956639] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
[ 41.984021] mmcblk0rpmb: retrying using single block read
[ 42.013480] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 42.043118] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 42.072609] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 42.102063] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 42.131355] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 42.160452] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 42.187206] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 42.213908] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 46.035190] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 47.575941] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.602582] smsc75xx 1-1.2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 47.633581] smsc75xx 1-1.2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Attachment: signature.asc
Description: This is a digitally signed message part.