Re: 3.15-rc: regression in suspend

From: Jiri Kosina
Date: Thu May 15 2014 - 11:29:13 EST

Next message: Mika Westerberg: "[PATCH 1/2] pinctrl: baytrail: Add back Baytrail-T ACPI ID"
Previous message: chrubis: "Re: futex(2) man page update help request"
In reply to: Pavel Machek: "Re: 3.15-rc: regression in suspend"
Next in thread: Daniel Vetter: "Re: 3.15-rc: regression in suspend"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 14 May 2014, Pavel Machek wrote:

> > > > > > There seems to be regression in 3.15 w.r.t. suspend to ram and suspend
> > > > > > to disk.
> > > > > >
> > > > > > Resume sometiems works, but often, system is half-usable, with "what
> > > > > > do you want to do suspend/hibernate" dialog staying on screen.
> > > > > >
> > > > > > I did echo disk > /sys/power/state, and echo never returned to the
> > > > > > shell prompt. (X was not really working, either.)
> > > > > >
> > > > > > It is still there on 3.15.0-rc3+. I'll update to rc5 now.
> > > > >
> > > > > 3.15.0-rc5+ seems to behave a bit better. Lets see if it reappears.
> > > >
> > > > It did.
> > >
> > > So it might in the end of the day the same thing as I have reported in
> > >
> > > https://bugs.freedesktop.org/show_bug.cgi?id=76554
> > >
> > > which is not 100% reproducible either (although with newer kernels it's
> > > *much* more reproducible for me than with older).
> > >
> > > > It worked few times on -rc5, but then I rebooted and problem
> > > > re-appeared.
> > >
> > > If you could capture dmesg of the resume where X fails to resume properly
> > > to see whether you have i915 ring initialization errors there as well?
> >
> > I did dmesg and I believe I would have noticed "*ERROR*" there.. but
> > I'll of course capture the buffer when it happens.
> >
> > Note that X do work somehow after resume (I can't switch virtual
> > desktops and dialog is stuck on screen, but it is not complete
> > failure). I can do ctrl-alt-f1 and get to useful prompt.
>
> Oops. You were right. It seems it is duplicate after all.
>
> [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00001020 tail 00000000 start 00003000

Pavel, thanks a lot for testing.

Adding Daniel and Chris to CC -- we have another incarnation of the bug
that is being chased in 76554.

> Full dmesg is below.
>
> Oops, I already bisected one i915 regression this release :-(.
> Pavel
>
> Initializing cgroup subsys cpu
> Linux version 3.15.0-rc5+ (pavel@amd) (gcc version 4.4.5 (Debian 4.4.5-8) ) #355 SMP Tue May 13 18:19:09 CEST 2014
> e820: BIOS-provided physical RAM map:
> BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
> BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
> BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> BIOS-e820: [mem 0x0000000000100000-0x00000000bd87dfff] usable
> BIOS-e820: [mem 0x00000000bd87e000-0x00000000bd900fff] ACPI NVS
> BIOS-e820: [mem 0x00000000bd901000-0x00000000bda42fff] reserved
> BIOS-e820: [mem 0x00000000bda43000-0x00000000bda56fff] ACPI NVS
> BIOS-e820: [mem 0x00000000bda57000-0x00000000bdb54fff] reserved
> BIOS-e820: [mem 0x00000000bdb55000-0x00000000bdb5dfff] ACPI data
> BIOS-e820: [mem 0x00000000bdb5e000-0x00000000bdb67fff] ACPI NVS
> BIOS-e820: [mem 0x00000000bdb68000-0x00000000bdb88fff] reserved
> BIOS-e820: [mem 0x00000000bdb89000-0x00000000bdb8efff] ACPI NVS
> BIOS-e820: [mem 0x00000000bdb8f000-0x00000000bdcfffff] usable
> BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
> BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
> BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
> BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
> Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
> SMBIOS 2.4 present.
> DMI: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009
> e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> e820: remove [mem 0x000a0000-0x000fffff] usable
> e820: last_pfn = 0xbdd00 max_arch_pfn = 0x100000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
> 00000-9FFFF write-back
> A0000-E7FFF uncachable
> E8000-FFFFF write-protect
> MTRR variable ranges enabled:
> 0 base 000000000 mask F00000000 write-back
> 1 base 100000000 mask FC0000000 write-back
> 2 base 0BDD00000 mask FFFF00000 write-through
> 3 base 0BDE00000 mask FFFE00000 uncachable
> 4 base 0BE000000 mask FFE000000 uncachable
> 5 base 0C0000000 mask FC0000000 uncachable
> 6 disabled
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> initial memory mapped: [mem 0x00000000-0x053fffff]
> Base memory trampoline at [c009a000] 9a000 size 16384
> init_memory_mapping: [mem 0x00000000-0x000fffff]
> [mem 0x00000000-0x000fffff] page 4k
> init_memory_mapping: [mem 0x37000000-0x373fffff]
> [mem 0x37000000-0x373fffff] page 4k
> BRK [0x0510c000, 0x0510cfff] PGTABLE
> init_memory_mapping: [mem 0x30000000-0x36ffffff]
> [mem 0x30000000-0x36ffffff] page 4k
> BRK [0x0510d000, 0x0510dfff] PGTABLE
> BRK [0x0510e000, 0x0510efff] PGTABLE
> BRK [0x0510f000, 0x0510ffff] PGTABLE
> BRK [0x05110000, 0x05110fff] PGTABLE
> BRK [0x05111000, 0x05111fff] PGTABLE
> init_memory_mapping: [mem 0x00100000-0x2fffffff]
> [mem 0x00100000-0x2fffffff] page 4k
> init_memory_mapping: [mem 0x37400000-0x377fdfff]
> [mem 0x37400000-0x377fdfff] page 4k
> ACPI: RSDP 0x000F03C0 000024 (v02 INTEL )
> ACPI: XSDT 0xBDB5CE18 000044 (v01 INTEL DG41MJ 00000006 MSFT 00010013)
> ACPI: FACP 0xBDB5BD98 0000F4 (v04 INTEL DG41RQ 00000006 MSFT 00010013)
> ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xBDB5FF40/0x00000000BDB64F40, using 64-bit address (20140214/tbfadt-271)
> ACPI: DSDT 0xBDB55018 005983 (v01 INTEL DG41MJ 00000006 INTL 20051117)
> ACPI: FACS 0xBDB64F40 000040
> ACPI: APIC 0xBDB5BF18 00006C (v02 INTEL DG41MJ 00000006 MSFT 00010013)
> ACPI: MCFG 0xBDB66E18 00003C (v01 INTEL DG41MJ 00000006 MSFT 00000097)
> ACPI: HPET 0xBDB66D98 000038 (v01 INTEL DG41MJ 00000006 AMI. 00000003)
> ACPI: Local APIC address 0xfee00000
> 2149MB HIGHMEM available.
> 887MB LOWMEM available.
> mapped low ram: 0 - 377fe000
> low ram: 0 - 377fe000
> Zone ranges:
> DMA [mem 0x00001000-0x00ffffff]
> Normal [mem 0x01000000-0x377fdfff]
> HighMem [mem 0x377fe000-0xbdcfffff]
> Movable zone start for each node
> Early memory node ranges
> node 0: [mem 0x00001000-0x0009dfff]
> node 0: [mem 0x00100000-0xbd87dfff]
> node 0: [mem 0xbdb8f000-0xbdcfffff]
> On node 0 totalpages: 776588
> free_area_init_node: node 0, pgdat c4b58980, node_mem_map f5885024
> DMA zone: 36 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 3997 pages, LIFO batch:0
> Normal zone: 1962 pages used for memmap
> Normal zone: 223230 pages, LIFO batch:31
> HighMem zone: 4836 pages used for memmap
> HighMem zone: 549361 pages, LIFO batch:31
> Using APIC driver default
> Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> smpboot: Allowing 4 CPUs, 2 hotplug CPUs
> nr_irqs_gsi: 40
> PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
> PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
> setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
> PERCPU: Embedded 13 pages/cpu @f7794000 s29312 r0 d23936 u53248
> pcpu-alloc: s29312 r0 d23936 u53248 alloc=13*4096
> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774590
> Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux-good/arch/x86/boot/bzImage root=/dev/sda3 resume=/dev/sda1
> PID hash table entries: 4096 (order: 2, 16384 bytes)
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Initializing CPU#0
> xsave: enabled xstate_bv 0x3, cntxt size 0x240
> Initializing HighMem for node 0 (000377fe:000bdd00)
> Initializing Movable for node 0 (00000000:00000000)
> Memory: 3059448K/3106352K available (8175K kernel code, 533K rwdata, 3012K rodata, 492K init, 5108K bss, 46904K reserved, 2197444K highmem)
> virtual kernel memory layout:
> fixmap : 0xffe6f000 - 0xfffff000 (1600 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
> lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
> .init : 0xc4b76000 - 0xc4bf1000 ( 492 kB)
> .data : 0xc47fc1cf - 0xc4b746c0 (3553 kB)
> .text : 0xc4000000 - 0xc47fc1cf (8176 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> Hierarchical RCU implementation.
> RCU dyntick-idle grace-period acceleration is enabled.
> RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> NR_IRQS:2304 nr_irqs:712 16
> CPU 0 irqstacks, hard=f541a000 soft=f541c000
> spurious 8259A interrupt: IRQ7.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> ... MAX_LOCKDEP_SUBCLASSES: 8
> ... MAX_LOCK_DEPTH: 48
> ... MAX_LOCKDEP_KEYS: 8191
> ... CLASSHASH_SIZE: 4096
> ... MAX_LOCKDEP_ENTRIES: 16384
> ... MAX_LOCKDEP_CHAINS: 32768
> ... CHAINHASH_SIZE: 16384
> memory used by lock dependency info: 3551 kB
> per task-struct memory footprint: 1152 bytes
> ODEBUG: 11 of 11 active objects replaced
> hpet clockevent registered
> tsc: Fast TSC calibration using PIT
> tsc: Detected 2800.142 MHz processor
> Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.28 BogoMIPS (lpj=11200568)
> pid_max: default: 32768 minimum: 301
> ACPI: Core revision 20140214
> ACPI: All ACPI Tables successfully acquired
> Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
> Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
> Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
> tlb_flushall_shift: -1
> debug: unmapping init [mem 0xc4bf1000-0xc4bf8fff]
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (fam: 06, model: 17, stepping: 0a)
> Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
> ... version: 2
> ... bit width: 40
> ... generic registers: 2
> ... value mask: 000000ffffffffff
> ... max period: 000000007fffffff
> ... fixed-purpose events: 3
> ... event mask: 0000000700000003
> CPU 1 irqstacks, hard=f55b8000 soft=f55ba000
> x86: Booting SMP configuration:
> .... node #0, CPUs: #1
> Initializing CPU#1
> x86: Booted up 1 node, 2 CPUs
> smpboot: Total of 2 processors activated (11200.56 BogoMIPS)
> NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> devtmpfs: initialized
> PM: Registering ACPI NVS region [mem 0xbd87e000-0xbd900fff] (536576 bytes)
> PM: Registering ACPI NVS region [mem 0xbda43000-0xbda56fff] (81920 bytes)
> PM: Registering ACPI NVS region [mem 0xbdb5e000-0xbdb67fff] (40960 bytes)
> PM: Registering ACPI NVS region [mem 0xbdb89000-0xbdb8efff] (24576 bytes)
> NET: Registered protocol family 16
> cpuidle: using governor ladder
> cpuidle: using governor menu
> ACPI: bus type PCI registered
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> PCI: not using MMCONFIG
> PCI: Using configuration type 1 for base access
> ACPI: Added _OSI(Module Device)
> ACPI: Added _OSI(Processor Device)
> ACPI: Added _OSI(3.0 _SCP Extensions)
> ACPI: Added _OSI(Processor Aggregator Device)
> ACPI: Executed 1 blocks of module-level executable AML code
> ACPI: SSDT 0xBDB5FC18 0002CC (v01 AMI IST 00000001 MSFT 03000001)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0x00000000 0002CC (v01 AMI IST 00000001 MSFT 03000001)
> ACPI: Interpreter enabled
> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> PCI: Using MMCONFIG for extended config space
> PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> ACPI: \_PR_.CPU3: failed to get CPU APIC ID.
> ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
> ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
> ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
> ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
> ACPI: \_PR_.CPU8: failed to get CPU APIC ID.
> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments]
> acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
> PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [bus 00-ff]
> pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
> pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
> pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:01.0: System wakeup disabled by ACPI
> pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
> pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
> pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
> pci 0000:00:02.0: reg 0x20: [io 0xf140-0xf147]
> pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000
> pci 0000:00:02.1: reg 0x10: [mem 0xd0400000-0xd04fffff 64bit]
> pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
> pci 0000:00:1b.0: reg 0x10: [mem 0xd0600000-0xd0603fff 64bit]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: System wakeup disabled by ACPI
> pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.1: System wakeup disabled by ACPI
> pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
> pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
> pci 0000:00:1d.0: System wakeup disabled by ACPI
> pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
> pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
> pci 0000:00:1d.1: System wakeup disabled by ACPI
> pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
> pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
> pci 0000:00:1d.2: System wakeup disabled by ACPI
> pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
> pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
> pci 0000:00:1d.3: System wakeup disabled by ACPI
> pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
> pci 0000:00:1d.7: reg 0x10: [mem 0xd0604000-0xd06043ff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: System wakeup disabled by ACPI
> pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
> pci 0000:00:1e.0: System wakeup disabled by ACPI
> pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
> pci 0000:00:1f.0: can't claim BAR 7 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
> pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
> pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
> pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
> pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
> pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
> pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
> pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff]
> pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
> pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
> pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
> pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
> pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
> pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7]
> pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3]
> pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7]
> pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3]
> pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
> pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
> pci 0000:00:01.0: PCI bridge to [bus 01]
> pci 0000:00:1c.0: PCI bridge to [bus 02]
> pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
> pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
> pci 0000:03:00.0: reg 0x18: [mem 0xd0514000-0xd0514fff 64bit pref]
> pci 0000:03:00.0: reg 0x20: [mem 0xd0510000-0xd0513fff 64bit pref]
> pci 0000:03:00.0: reg 0x30: [mem 0xd0500000-0xd050ffff pref]
> pci 0000:03:00.0: supports D1 D2
> pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:00:1c.1: PCI bridge to [bus 03]
> pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
> pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
> pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
> pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
> pci_bus 0000:00: on NUMA node 0
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
> ACPI: Enabled 2 GPEs in block 00 to 1F
> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> vgaarb: bridge control possible 0000:00:02.0
> SCSI subsystem initialized
> libata version 3.00 loaded.
> ACPI: bus type USB registered
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> pps_core: LinuxPPS API ver. 1 registered
> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
> PTP clock support registered
> EDAC MC: Ver: 3.0.0
> Advanced Linux Sound Architecture Driver Initialized.
> PCI: Using ACPI for IRQ routing
> PCI: pci_cache_line_size set to 64 bytes
> e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
> e820: reserve RAM buffer [mem 0xbd87e000-0xbfffffff]
> e820: reserve RAM buffer [mem 0xbdd00000-0xbfffffff]
> Bluetooth: Core ver 2.19
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO socket layer initialized
> ------------[ cut here ]------------
> WARNING: CPU: 1 PID: 1 at net/wireless/reg.c:479 regulatory_init+0x88/0xf5()
> db.txt is empty, you should update it...
> Modules linked in:
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc5+ #355
> Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009
> 000001df f5517e44 c47f5aaf c4a9ff8c f5517e74 c403875a c4aa9e34 f5517ea0
> 00000001 c4a9ff8c 000001df c4bac935 c4bac935 00000000 c4bac7d6 f5517ec8
> f5517e8c c40387fe 00000009 f5517e84 c4aa9e34 f5517ea0 f5517ecc c4bac935
> Call Trace:
> [<c47f5aaf>] dump_stack+0x41/0x52
> [<c403875a>] warn_slowpath_common+0x7a/0xa0
> [<c4bac935>] ? regulatory_init+0x88/0xf5
> [<c4bac935>] ? regulatory_init+0x88/0xf5
> [<c4bac7d6>] ? cache_initialize+0x86/0x86
> [<c40387fe>] warn_slowpath_fmt+0x2e/0x30
> [<c4bac935>] regulatory_init+0x88/0xf5
> [<c4bac835>] cfg80211_init+0x5f/0xd7
> [<c4babe77>] ? bt_init+0x6e/0x98
> [<c40003fa>] do_one_initcall+0xca/0x180
> [<c406e4ab>] ? __wake_up+0x1b/0x50
> [<c4b76663>] ? repair_env_string+0x15/0x5b
> [<c4051e61>] ? parse_args+0x1f1/0x440
> [<c4b765a9>] kernel_init_freeable+0xec/0x191
> [<c4b7664e>] ? kernel_init_freeable+0x191/0x191
> [<c47f228b>] kernel_init+0xb/0xe0
> [<c47facc1>] ret_from_kernel_thread+0x21/0x30
> [<c47f2280>] ? rest_init+0xb0/0xb0
> ---[ end trace 61e8190fed118a63 ]---
> cfg80211: Calling CRDA to update world regulatory domain
> Switched to clocksource hpet
> pnp: PnP ACPI init
> ACPI: bus type PNP registered
> system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
> system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
> system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> system 00:01: [io 0x0800-0x087f] could not be reserved
> system 00:01: [io 0x0480-0x04bf] has been reserved
> system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
> system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
> system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
> system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
> system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
> system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:03: [dma 0 disabled]
> pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
> pnp 00:04: [dma 3]
> pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
> pnp 00:05: [dma 4]
> pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
> pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
> system 00:08: [io 0x04d0-0x04d1] has been reserved
> system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
> pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
> pnp: PnP ACPI: found 11 devices
> ACPI: bus type PNP unregistered
> pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
> pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
> pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
> pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
> pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0700000-0xd08fffff]
> pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0900000-0xd0afffff 64bit pref]
> pci 0000:00:1c.1: BAR 9: assigned [mem 0xd0b00000-0xd0cfffff 64bit pref]
> pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
> pci 0000:00:01.0: PCI bridge to [bus 01]
> pci 0000:00:1c.0: PCI bridge to [bus 02]
> pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd08fffff]
> pci 0000:00:1c.0: bridge window [mem 0xd0900000-0xd0afffff 64bit pref]
> pci 0000:00:1c.1: PCI bridge to [bus 03]
> pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
> pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
> pci 0000:00:1c.1: bridge window [mem 0xd0b00000-0xd0cfffff 64bit pref]
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
> pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
> pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd08fffff]
> pci_bus 0000:02: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref]
> pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
> pci_bus 0000:03: resource 1 [mem 0xd0500000-0xd05fffff]
> pci_bus 0000:03: resource 2 [mem 0xd0b00000-0xd0cfffff 64bit pref]
> pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
> pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
> pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:04: resource 7 [mem 0xc0000000-0xffffffff]
> NET: Registered protocol family 2
> TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
> TCP: Hash tables configured (established 8192 bind 8192)
> TCP: reno registered
> UDP hash table entries: 512 (order: 3, 40960 bytes)
> UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> pci 0000:00:02.0: Boot video device
> PCI: CLS 64 bytes, default 64
> futex hash table entries: 1024 (order: 4, 65536 bytes)
> bounce pool size: 64 pages
> ntfs: driver 2.1.30 [Flags: R/W].
> fuse init (API version 7.23)
> msgmni has been set to 1683
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
> usbcore: registered new interface driver udlfb
> intel_idle: does not run on family 6 model 23
> input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> ACPI: Power Button [PWRB]
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> ACPI: Power Button [PWRF]
> GHES: HEST is not enabled!
> ERST DBG: ERST support is disabled.
> Error: Driver 'battery' is already registered, aborting...
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> lp: driver loaded but no devices found
> Non-volatile memory driver v1.3
> intel_rng: Firmware space is locked read-only. If you can't or
> intel_rng: don't want to disable this in firmware setup, and if
> intel_rng: you are certain that your system has a functional
> intel_rng: RNG, try using the 'no_fwh_detect' option.
> Linux agpgart interface v0.103
> agpgart-intel 0000:00:00.0: Intel G41 Chipset
> agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
> agpgart-intel 0000:00:00.0: detected 32768K stolen memory
> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
> [drm] Initialized drm 1.1.0 20060810
> [drm] Memory usable by graphics device = 2048M
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] Driver supports precise vblank timestamp query.
> vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> fbcon: inteldrmfb (fb0) is primary device
> Console: switching to colour frame buffer device 192x60
> i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> i915 0000:00:02.0: registered panic notifier
> ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20140214/video-1251)
> ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
> input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
> [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> parport_pc 00:04: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP(,...)]
> lp0: using parport0 (interrupt-driven).
> loop: module loaded
> nbd: registered device at major 43
> ata_piix 0000:00:1f.1: version 2.13
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
> ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
> ata2: port disabled--ignoring
> scsi2 : ata_piix
> scsi3 : ata_piix
> ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
> ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
> r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xf8024000, 00:27:0e:2a:43:71, XID 081000c0 IRQ 17
> r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> PPP generic driver version 2.4.2
> PPP BSD Compression module registered
> PPP Deflate Compression module registered
> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
> CSLIP: code copyright 1989 Regents of the University of California.
> iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
> iwl3945: Copyright(c) 2003-2011 Intel Corporation
> usbcore: registered new interface driver ax88179_178a
> usbcore: registered new interface driver cdc_ether
> usbcore: registered new interface driver net1080
> usbcore: registered new interface driver cdc_subset
> usbcore: registered new interface driver zaurus
> usbcore: registered new interface driver cdc_ncm
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci-pci: EHCI PCI platform driver
> ehci-pci 0000:00:1d.7: EHCI Host Controller
> ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
> ehci-pci 0000:00:1d.7: debug port 1
> ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
> ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0604000
> ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 3.15.0-rc5+ ehci_hcd
> usb usb1: SerialNumber: 0000:00:1d.7
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> ohci-pci: OHCI PCI platform driver
> uhci_hcd: USB Universal Host Controller Interface driver
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.0: detected 2 ports
> uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: UHCI Host Controller
> usb usb2: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd
> usb usb2: SerialNumber: 0000:00:1d.0
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.1: detected 2 ports
> uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd
> usb usb3: SerialNumber: 0000:00:1d.1
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: detected 2 ports
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd
> usb usb4: SerialNumber: 0000:00:1d.2
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: detected 2 ports
> uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> ata3.01: NODEV after polling detection
> usb usb5: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd
> usb usb5: SerialNumber: 0000:00:1d.3
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ata3.00: ATAPI: HL-DT-ST DVDRAM GT20N, CQ02, max UDMA/133
> usbcore: registered new interface driver cdc_acm
> cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
> usbcore: registered new interface driver usblp
> usbcore: registered new interface driver usb-storage
> usbcore: registered new interface driver ums-sddr09
> usbcore: registered new interface driver usbserial
> usbcore: registered new interface driver usbserial_generic
> usbserial: USB Serial support registered for generic
> usbcore: registered new interface driver ftdi_sio
> usbserial: USB Serial support registered for FTDI USB Serial Device
> usbcore: registered new interface driver option
> usbserial: USB Serial support registered for GSM modem (1-port)
> usbcore: registered new interface driver pl2303
> usbserial: USB Serial support registered for pl2303
> usbcore: registered new interface driver ti_usb_3410_5052
> usbserial: USB Serial support registered for TI USB 3410 1 port adapter
> usbserial: USB Serial support registered for TI USB 5052 2 port adapter
> driver ftdi-elan
> usbcore: registered new interface driver ftdi-elan
> i8042: PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mousedev: PS/2 mouse device common for all mice
> input: PC Speaker as /devices/platform/pcspkr/input/input4
> rtc_cmos 00:06: RTC can wake from S4
> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> ata3.00: configured for UDMA/133
> rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> md: raid0 personality registered for level 0
> md: raid1 personality registered for level 1
> device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
> scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N CQ02 PQ: 0 ANSI: 5
> Bluetooth: HCI UART driver ver 2.2
> Bluetooth: HCI H4 protocol initialized
> Bluetooth: HCI BCSP protocol initialized
> usbcore: registered new interface driver btusb
> lguest: mapped switcher at ffe65000
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> hidraw: raw HID events driver (C) Jiri Kosina
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> usbcore: registered new interface driver snd-usb-audio
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> cdrom: Uniform CD-ROM driver Revision: 3.20
> sr 2:0:0:0: Attached scsi CD-ROM sr0
> sr 2:0:0:0: Attached scsi generic sg0 type 5
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP: cubic registered
> NET: Registered protocol family 17
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM ver 1.11
> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> Bluetooth: BNEP filters: protocol multicast
> Bluetooth: BNEP socket layer initialized
> Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> Bluetooth: HIDP socket layer initialized
> Using IPI No-Shortcut mode
> ata4.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133
> rtc_cmos 00:06: setting system clock to 2014-05-13 19:46:01 UTC (1400010361)
> ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> PM: Checking hibernation image partition /dev/sda1
> sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
> sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> sound hdaudioC0D2: mono: mono_out=0x0
> sound hdaudioC0D2: inputs:
> sound hdaudioC0D2: Front Mic=0x19
> sound hdaudioC0D2: Rear Mic=0x18
> sound hdaudioC0D2: Line=0x1a
> input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> usb 1-4: new high-speed USB device number 2 using ehci-pci
> ata4.00: configured for UDMA/133
> scsi 3:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5
> sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> sd 3:0:0:0: Attached scsi generic sg1 type 0
> sd 3:0:0:0: [sda] 4096-byte physical blocks
> sd 3:0:0:0: [sda] Write Protect is off
> sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
> sd 3:0:0:0: [sda] Attached SCSI disk
> PM: Hibernation image partition 8:1 present
> PM: Looking for hibernation image.
> PM: Image not found (code -22)
> PM: Hibernation image not present or could not be loaded.
> ALSA device list:
> #0: HDA Intel at 0xd0600000 irq 16
> md: Waiting for all devices to be available before autodetect
> md: If you don't use raid, use raid=noautodetect
> md: Autodetecting RAID arrays.
> md: Scanned 0 and added 0 devices.
> md: autorun ...
> md: ... autorun DONE.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs (sda3): mounted filesystem with ordered data mode
> VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
> devtmpfs: mounted
> debug: unmapping init [mem 0xc4b76000-0xc4bf0fff]
> Write protecting the kernel text: 8180k
> Write protecting the kernel read-only data: 3016k
> usb 1-4: New USB device found, idVendor=058f, idProduct=6362
> usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 1-4: Product: Mass Storage Device
> usb 1-4: Manufacturer: Generic
> usb 1-4: SerialNumber: 058F312D81B
> usb-storage 1-4:1.0: USB Mass Storage device detected
> scsi4 : usb-storage 1-4:1.0
> tsc: Refined TSC clocksource calibration: 2799.956 MHz
> udev[1661]: starting version 164
> usb 5-1: new low-speed USB device number 2 using uhci_hcd
> usb 5-1: New USB device found, idVendor=046d, idProduct=c050
> usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 5-1: Product: USB-PS/2 Optical Mouse
> usb 5-1: Manufacturer: Logitech
> input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C050.0001/input/input10
> hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-1/input0
> usb 5-2: new low-speed USB device number 3 using uhci_hcd
> scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
> sd 4:0:0:0: Attached scsi generic sg2 type 0
> scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
> sd 4:0:0:0: [sdb] Attached SCSI removable disk
> sd 4:0:0:1: Attached scsi generic sg3 type 0
> scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
> sd 4:0:0:1: [sdc] Attached SCSI removable disk
> sd 4:0:0:2: Attached scsi generic sg4 type 0
> scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
> sd 4:0:0:2: [sdd] Attached SCSI removable disk
> Adding 2097148k swap on /dev/sda1. Priority:-1 extents:1 across:2097148k
> sd 4:0:0:3: Attached scsi generic sg5 type 0
> sd 4:0:0:3: [sde] Attached SCSI removable disk
> Switched to clocksource tsc
> EXT3-fs (sda3): using internal journal
> usb 5-2: New USB device found, idVendor=04f2, idProduct=0111
> usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 5-2: Product: USB Keyboard
> usb 5-2: Manufacturer: Chicony
> input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:04F2:0111.0002/input/input11
> hid-generic 0003:04F2:0111.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input0
> input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0111.0003/input/input12
> hid-generic 0003:04F2:0111.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input1
> EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
> EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
> EXT3-fs (sda4): error: can't find ext3 filesystem on dev sda4.
> random: nonblocking pool is initialized
> input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
> r8169 0000:03:00.0: Direct firmware load failed with error -2
> r8169 0000:03:00.0: Falling back to user helper
> r8169 0000:03:00.0 eth1: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-12)
> r8169 0000:03:00.0 eth1: link down
> r8169 0000:03:00.0 eth1: link down
> sshd (3175): /proc/3175/oom_adj is deprecated, please use /proc/3175/oom_score_adj instead.
> r8169 0000:03:00.0 eth1: link up
> perf interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
> perf interrupt took too long (5008 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
> PM: Syncing filesystems ... done.
> PM: Preparing system for mem sleep
> Freezing user space processes ... (elapsed 0.006 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done.
> PM: Entering mem sleep
> Suspending console(s) (use no_console_suspend to debug)
> sd 3:0:0:0: [sda] Synchronizing SCSI cache
> parport_pc 00:04: disabled
> sd 3:0:0:0: [sda] Stopping disk
> serial 00:03: disabled
> serial 00:03: System wakeup disabled by ACPI
> PM: suspend of devices complete after 334.723 msecs
> PM: suspend devices took 0.336 seconds
> PM: late suspend of devices complete after 16.001 msecs
> pcieport 0000:00:1c.1: System wakeup enabled by ACPI
> ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
> PM: noirq suspend of devices complete after 16.089 msecs
> ACPI: Preparing to enter system sleep state S3
> PM: Saving platform NVS memory
> Disabling non-boot CPUs ...
> smpboot: CPU 1 is now offline
> ACPI: Low-level resume complete
> PM: Restoring platform NVS memory
> Enabling non-boot CPUs ...
> x86: Booting SMP configuration:
> smpboot: Booting Node 0 Processor 1 APIC 0x1
> Initializing CPU#1
> TSC synchronization [CPU#0 -> CPU#1]:
> Measured 2298956531 cycles TSC warp between CPUs, turning off TSC clock.
> tsc: Marking TSC unstable due to check_tsc_sync_source failed
> CPU1 is up
> ACPI: Waking up from system sleep state S3
> ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event
> ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event
> Switched to clocksource hpet
> uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
> ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
> PM: noirq resume of devices complete after 1270502.801 msecs
> PM: early resume of devices complete after 1.691 msecs
> usb usb2: root hub lost power or was reset
> usb usb3: root hub lost power or was reset
> usb usb4: root hub lost power or was reset
> usb usb5: root hub lost power or was reset
> serial 00:03: activated
> parport_pc 00:04: activated
> pcieport 0000:00:1c.1: System wakeup disabled by ACPI
> ata2: port disabled--ignoring
> sd 3:0:0:0: [sda] Starting disk
> ata3.01: NODEV after polling detection
> ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
> ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
> ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
> ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
> ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
> ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
> ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
> ata3.00: configured for UDMA/133
> ata4.00: configured for UDMA/133
> usb 5-2: reset low-speed USB device number 3 using uhci_hcd
> usb 5-1: reset low-speed USB device number 2 using uhci_hcd
> PM: resume of devices complete after 2922.312 msecs
> PM: resume devices took 2.924 seconds
> ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event()
> PM: Finishing wakeup.
> Restarting tasks ...
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> done.
> video LNXVIDEO:00: Restoring backlight state
> r8169 0000:03:00.0 eth1: link down
> r8169 0000:03:00.0 eth1: link down
> r8169 0000:03:00.0 eth1: link up
> PM: Syncing filesystems ... done.
> PM: Preparing system for mem sleep
> Freezing user space processes ... (elapsed 0.010 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.011 seconds) done.
> PM: Entering mem sleep
> Suspending console(s) (use no_console_suspend to debug)
> sd 3:0:0:0: [sda] Synchronizing SCSI cache
> sd 3:0:0:0: [sda] Stopping disk
> parport_pc 00:04: disabled
> serial 00:03: disabled
> serial 00:03: System wakeup disabled by ACPI
> PM: suspend of devices complete after 322.768 msecs
> PM: suspend devices took 0.324 seconds
> PM: late suspend of devices complete after 15.985 msecs
> pcieport 0000:00:1c.1: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
> ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
> PM: noirq suspend of devices complete after 16.100 msecs
> ACPI: Preparing to enter system sleep state S3
> PM: Saving platform NVS memory
> Disabling non-boot CPUs ...
> smpboot: CPU 1 is now offline
> ACPI: Low-level resume complete
> PM: Restoring platform NVS memory
> Enabling non-boot CPUs ...
> x86: Booting SMP configuration:
> smpboot: Booting Node 0 Processor 1 APIC 0x1
> Initializing CPU#1
> CPU1 is up
> ACPI: Waking up from system sleep state S3
> ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event
> ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event
> uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
> ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
> PM: noirq resume of devices complete after 13.758 msecs
> PM: early resume of devices complete after 1.325 msecs
> usb usb2: root hub lost power or was reset
> usb usb3: root hub lost power or was reset
> usb usb4: root hub lost power or was reset
> usb usb5: root hub lost power or was reset
> serial 00:03: activated
> parport_pc 00:04: activated
> pcieport 0000:00:1c.1: System wakeup disabled by ACPI
> ata2: port disabled--ignoring
> sd 3:0:0:0: [sda] Starting disk
> ata3.01: NODEV after polling detection
> ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
> ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
> ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
> ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
> ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
> ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
> ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
> ata3.00: configured for UDMA/133
> ata4.00: configured for UDMA/133
> usb 5-2: reset low-speed USB device number 3 using uhci_hcd
> usb 5-1: reset low-speed USB device number 2 using uhci_hcd
> PM: resume of devices complete after 3046.488 msecs
> PM: resume devices took 3.048 seconds
> ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event()
> PM: Finishing wakeup.
> Restarting tasks ...
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> done.
> video LNXVIDEO:00: Restoring backlight state
> r8169 0000:03:00.0 eth1: link down
> r8169 0000:03:00.0 eth1: link down
> r8169 0000:03:00.0 eth1: link up
> PM: Syncing filesystems ... done.
> PM: Preparing system for mem sleep
> Freezing user space processes ... (elapsed 0.011 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
> PM: Entering mem sleep
> Suspending console(s) (use no_console_suspend to debug)
> sd 3:0:0:0: [sda] Synchronizing SCSI cache
> parport_pc 00:04: disabled
> serial 00:03: disabled
> serial 00:03: System wakeup disabled by ACPI
> sd 3:0:0:0: [sda] Stopping disk
> PM: suspend of devices complete after 350.696 msecs
> PM: suspend devices took 0.352 seconds
> PM: late suspend of devices complete after 15.995 msecs
> pcieport 0000:00:1c.1: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
> ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
> uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
> PM: noirq suspend of devices complete after 16.097 msecs
> ACPI: Preparing to enter system sleep state S3
> PM: Saving platform NVS memory
> Disabling non-boot CPUs ...
> smpboot: CPU 1 is now offline
> ACPI: Low-level resume complete
> PM: Restoring platform NVS memory
> Enabling non-boot CPUs ...
> x86: Booting SMP configuration:
> smpboot: Booting Node 0 Processor 1 APIC 0x1
> Initializing CPU#1
> CPU1 is up
> ACPI: Waking up from system sleep state S3
> ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event
> ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event
> ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event
> uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
> uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
> ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
> PM: noirq resume of devices complete after 16.838 msecs
> PM: early resume of devices complete after 1.327 msecs
> usb usb2: root hub lost power or was reset
> usb usb3: root hub lost power or was reset
> usb usb4: root hub lost power or was reset
> usb usb5: root hub lost power or was reset
> pcieport 0000:00:1c.1: System wakeup disabled by ACPI
> serial 00:03: activated
> parport_pc 00:04: activated
> ata2: port disabled--ignoring
> sd 3:0:0:0: [sda] Starting disk
> [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00001020 tail 00000000 start 00003000
> ata3.01: NODEV after polling detection
> ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
> ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
> ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
> ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
> ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
> ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
> ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
> dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -5
> PM: Device 0000:00:02.0 failed to resume async: error -5
> ata3.00: configured for UDMA/133
> ata4.00: configured for UDMA/133
> usb 5-1: reset low-speed USB device number 2 using uhci_hcd
> usb 5-2: reset low-speed USB device number 3 using uhci_hcd
> PM: resume of devices complete after 2964.956 msecs
> PM: resume devices took 2.964 seconds
> ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event()
> PM: Finishing wakeup.
> Restarting tasks ...
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event()
> i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
> pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
> pci 0000:00:1e.0: PCI bridge to [bus 04]
> agpgart-intel 0000:00:00.0: no hotplug settings from platform
> agpgart-intel 0000:00:00.0: using default PCI settings
> pcieport 0000:00:01.0: no hotplug settings from platform
> i915 0000:00:02.0: no hotplug settings from platform
> i915 0000:00:02.0: using default PCI settings
> pci 0000:00:02.1: no hotplug settings from platform
> pci 0000:00:02.1: using default PCI settings
> snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
> pcieport 0000:00:1c.0: no hotplug settings from platform
> pcieport 0000:00:1c.1: no hotplug settings from platform
> r8169 0000:03:00.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: no hotplug settings from platform
> uhci_hcd 0000:00:1d.0: using default PCI settings
> uhci_hcd 0000:00:1d.1: no hotplug settings from platform
> uhci_hcd 0000:00:1d.1: using default PCI settings
> uhci_hcd 0000:00:1d.2: no hotplug settings from platform
> uhci_hcd 0000:00:1d.2: using default PCI settings
> uhci_hcd 0000:00:1d.3: no hotplug settings from platform
> uhci_hcd 0000:00:1d.3: using default PCI settings
> ehci-pci 0000:00:1d.7: no hotplug settings from platform
> ehci-pci 0000:00:1d.7: using default PCI settings
> pci 0000:00:1e.0: no hotplug settings from platform
> pci 0000:00:1e.0: using default PCI settings
> pci 0000:00:1f.0: no hotplug settings from platform
> pci 0000:00:1f.0: using default PCI settings
> ata_piix 0000:00:1f.1: no hotplug settings from platform
> ata_piix 0000:00:1f.1: using default PCI settings
> ata_piix 0000:00:1f.2: no hotplug settings from platform
> ata_piix 0000:00:1f.2: using default PCI settings
> pci 0000:00:1f.3: no hotplug settings from platform
> pci 0000:00:1f.3: using default PCI settings
> done.
> video LNXVIDEO:00: Restoring backlight state
> r8169 0000:03:00.0 eth1: link down
> r8169 0000:03:00.0 eth1: link down
> r8169 0000:03:00.0 eth1: link up
>
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>

--
Jiri Kosina
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Mika Westerberg: "[PATCH 1/2] pinctrl: baytrail: Add back Baytrail-T ACPI ID"
Previous message: chrubis: "Re: futex(2) man page update help request"
In reply to: Pavel Machek: "Re: 3.15-rc: regression in suspend"
Next in thread: Daniel Vetter: "Re: 3.15-rc: regression in suspend"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]