Re: [PATCH] ARM: at91: remove ISI code for AT91SAM9263

[Josh Wu]

Hi, Paul

On 5/15/2014 4:34 PM, Paul Bolle wrote:
> In v2.6.25 code was added for an Image Sensor Interface (ISI) for
> AT91SAM9263. That code depended on the Kconfig macro
> CONFIG_VIDEO_AT91_ISI and its MODULE variant. The related Kconfig symbol
> has never been added to the tree. The net effect of this was that
> at91_add_device_isi() was a NOP. No one noticed because no callers of
> that function were added to the tree at that time.
>
> The first caller of a function with that name was added in v3.4. But
> that caller apparently only called the function defined for AT91SAM9G45.
> (that function was also added in v3.4). So even then AT91SAM9263's NOP
> version of at91_add_device_isi() remained unused. This means that the
> ISI code for AT91SAM9263 can be removed.
>
> Signed-off-by: Paul Bolle <pebolle@xxxxxxxxxx>
> ---
> Untested!
>
> Could someone please verify that this definition of
> at91_add_device_isi() really never will be called.

Right. There is no implement to support for at91sam9263 ISI. So in 
at91sam9263ek it will not call at91_add_device_isi().
Current ISI driver only support at91sam9g45 and later chips.

Acked-by: Josh Wu <josh.wu@xxxxxxxxx>

Best Regards,
Josh Wu

>   arch/arm/mach-at91/at91sam9263_devices.c | 57 --------------------------------
>   1 file changed, 57 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> index 43d53d6156dd..f2dab0a872a1 100644
> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> +++ b/arch/arm/mach-at91/at91sam9263_devices.c
> @@ -897,63 +897,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
>   
>
>   /* --------------------------------------------------------------------
> - *  Image Sensor Interface
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
> -
> -struct resource isi_resources[] = {
> -	[0] = {
> -		.start	= AT91SAM9263_BASE_ISI,
> -		.end	= AT91SAM9263_BASE_ISI + SZ_16K - 1,
> -		.flags	= IORESOURCE_MEM,
> -	},
> -	[1] = {
> -		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
> -		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
> -		.flags	= IORESOURCE_IRQ,
> -	},
> -};
> -
> -static struct platform_device at91sam9263_isi_device = {
> -	.name		= "at91_isi",
> -	.id		= -1,
> -	.resource	= isi_resources,
> -	.num_resources	= ARRAY_SIZE(isi_resources),
> -};
> -
> -void __init at91_add_device_isi(struct isi_platform_data *data,
> -		bool use_pck_as_mck)
> -{
> -	at91_set_A_periph(AT91_PIN_PE0, 0);	/* ISI_D0 */
> -	at91_set_A_periph(AT91_PIN_PE1, 0);	/* ISI_D1 */
> -	at91_set_A_periph(AT91_PIN_PE2, 0);	/* ISI_D2 */
> -	at91_set_A_periph(AT91_PIN_PE3, 0);	/* ISI_D3 */
> -	at91_set_A_periph(AT91_PIN_PE4, 0);	/* ISI_D4 */
> -	at91_set_A_periph(AT91_PIN_PE5, 0);	/* ISI_D5 */
> -	at91_set_A_periph(AT91_PIN_PE6, 0);	/* ISI_D6 */
> -	at91_set_A_periph(AT91_PIN_PE7, 0);	/* ISI_D7 */
> -	at91_set_A_periph(AT91_PIN_PE8, 0);	/* ISI_PCK */
> -	at91_set_A_periph(AT91_PIN_PE9, 0);	/* ISI_HSYNC */
> -	at91_set_A_periph(AT91_PIN_PE10, 0);	/* ISI_VSYNC */
> -	at91_set_B_periph(AT91_PIN_PE12, 0);	/* ISI_PD8 */
> -	at91_set_B_periph(AT91_PIN_PE13, 0);	/* ISI_PD9 */
> -	at91_set_B_periph(AT91_PIN_PE14, 0);	/* ISI_PD10 */
> -	at91_set_B_periph(AT91_PIN_PE15, 0);	/* ISI_PD11 */
> -
> -	if (use_pck_as_mck) {
> -		at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
> -
> -		/* TODO: register the PCK for ISI_MCK and set its parent */
> -	}
> -}
> -#else
> -void __init at91_add_device_isi(struct isi_platform_data *data,
> -		bool use_pck_as_mck) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
>    *  Timer/Counter block
>    * -------------------------------------------------------------------- */
>   

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/