[PATCH 2/2] Use musb->tusb_revision instead of tusb_get_revision call.
From: Matwey V. Kornilov
Date: Fri May 09 2014 - 08:10:16 EST
The value of the revision is stored in musb->tusb_revision,
so don't re-read it every time.
Exporting tusb_get_revision is not needed anymore,
so the dependency loop between tusb6010 and tusb6010_omap is resolved.
Signed-off-by: Matwey V. Kornilov <matwey@xxxxxxxxxx>
---
drivers/usb/musb/tusb6010.c | 19 ++++++++-----------
drivers/usb/musb/tusb6010.h | 2 --
drivers/usb/musb/tusb6010_omap.c | 2 +-
3 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 81fa8fd..d49415c 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -42,7 +42,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on);
* Checks the revision. We need to use the DMA register as 3.0 does not
* have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
*/
-u8 tusb_get_revision(struct musb *musb)
+static u8 tusb_get_revision(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
u32 die_id;
@@ -58,14 +58,13 @@ u8 tusb_get_revision(struct musb *musb)
return rev;
}
-EXPORT_SYMBOL_GPL(tusb_get_revision);
-static int tusb_print_revision(struct musb *musb)
+static void tusb_print_revision(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
u8 rev;
- rev = tusb_get_revision(musb);
+ rev = musb->tusb_revision;
pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
"prcm",
@@ -84,8 +83,6 @@ static int tusb_print_revision(struct musb *musb)
TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
"rev",
TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
-
- return tusb_get_revision(musb);
}
#define WBUS_QUIRK_MASK (TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
@@ -349,7 +346,7 @@ static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
u32 reg;
if ((wakeup_enables & TUSB_PRCM_WBUS)
- && (tusb_get_revision(musb) == TUSB_REV_30))
+ && (musb->tusb_revision == TUSB_REV_30))
tusb_wbus_quirk(musb, 1);
tusb_set_clock_source(musb, 0);
@@ -797,7 +794,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
u32 reg;
u32 i;
- if (tusb_get_revision(musb) == TUSB_REV_30)
+ if (musb->tusb_revision == TUSB_REV_30)
tusb_wbus_quirk(musb, 0);
/* there are issues re-locking the PLL on wakeup ... */
@@ -1012,10 +1009,10 @@ static int tusb_musb_start(struct musb *musb)
}
musb->tusb_revision = tusb_get_revision(musb);
- ret = tusb_print_revision(musb);
- if (ret < 2) {
+ tusb_print_revision(musb);
+ if (musb->tusb_revision < 2) {
printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
- ret);
+ musb->tusb_revision);
goto err;
}
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index 35c933a..3d40c63 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -12,8 +12,6 @@
#ifndef __TUSB6010_H__
#define __TUSB6010_H__
-extern u8 tusb_get_revision(struct musb *musb);
-
#ifdef CONFIG_USB_TUSB6010
#define musb_in_tusb() 1
#else
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index e33b6b2..3ce152c 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -677,7 +677,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba
tusb_dma->controller.channel_program = tusb_omap_dma_program;
tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
- if (tusb_get_revision(musb) >= TUSB_REV_30)
+ if (musb->tusb_revision >= TUSB_REV_30)
tusb_dma->multichannel = 1;
for (i = 0; i < MAX_DMAREQ; i++) {
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/