Re: Dell Latitude E6440 & i8k

[Guenter Roeck]

On 05/17/2014 02:09 PM, Jean Delvare wrote:
> On Sat, 17 May 2014 08:25:38 -0700, Guenter Roeck wrote:
> > On 05/16/2014 12:11 PM, Jean Delvare wrote:
> > > Load the i8k driver with fan_mult=1.
> >
> > Would it make sense to change the default multiplier to 1 ?
> > Lots of people have problems with it, and trying to figure out
> > affected machines one by one would be an all but impossible task.
>
> That would cause a regression on many (presumably older) machines. I
> doubt this is acceptable. One option would be to use the ACPI year to
> change the default, if indeed all new machines need fan_mult=1. I don't
> know if this is the case.
>
> One this I had in mind was auto-detecting the scaling factor. AFAIK
> only 30 and 1 are possible values, so any value above ~300 would imply
> scaling factor of 1 (30 would make it > 9000 RPM which is unrealistic.)
> But I don't know if we can actually do that, as such a simple heuristic
> could easily fail is the fan is stopped (30 * 0 == 1 * 0) or if the
> returned raw speed is temporarily unreliable for whatever reason.
Sounds like an idea. We could make the cutoff higher, such as 500 or
even 1000. I am not much concerned about 0 rpm - the code could simply check
the returned rpm and adjust the scaling factor to 1 if the reading is too
high. Since 30*0 is still 0, there is no problem if the fan is stopped.

> I have to admit that working on a reverse engineered driver for
> hardware I don't even have isn't quite at the top of my to-do list.

;-). We have several of those systems, so there is at least some interest
on my side. If I have time, I'll play around with it. The driver does need
major cleanup, though, so that may take a while.

Guenter

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/