[PATCH 2/2] serial: imx: remove the redandunt code

[Huang Shijie]

In the imx_startup(), we will reset the uart port which will reset all
the FIFOs, including the URXD.

So the code to clear the RX FIFO is redandunt. Just remove it.

Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx>
---
 drivers/tty/serial/imx.c |    9 ---------
 1 files changed, 0 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 64901d0..febf400 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1161,15 +1161,6 @@ static int imx_startup(struct uart_port *port)
 		temp |= UCR2_IRTS;
 	writel(temp, sport->port.membase + UCR2);
 
-	if (USE_IRDA(sport)) {
-		/* clear RX-FIFO */
-		int i = 64;
-		while ((--i > 0) &&
-			(readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
-			barrier();
-		}
-	}
-
 	if (!is_imx1_uart(sport)) {
 		temp = readl(sport->port.membase + UCR3);
 		temp |= IMX21_UCR3_RXDMUXSEL;
-- 
1.7.8

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/